Bosch Appliances 3931 Operating Instructions, Normal Vacuuming Mode, POWER-TOOL Activation Mode

The vacuum cleaner has four operating modes:

•Normal Vacuuming Mode

•Power Tool Activation Mode

•Pulse-Clean Filter Cleaning Mode

•Pulse-Clean Filter Cleaning Combined with Power Tool Activation Mode

!WARNING Avoid accidental starting. Be sure vacuum and tool

switches are OFF before plugging in or putting vacuum switch into power tool activation mode or filter cleaning mode. Do not keep power tool plugged into the vacuum cleaner’s power tool outlet during normal vacuuming. Plugging in vacuums or tools that have the switch ON invites accidents.

!WARNING Not suitable to vacuum hazardous or toxic

substances or dusts e.g. asbestos. The filters will not be able to capture all particles and may exhaust them back into the environment.

NORMAL VACUUMING MODE

Switching the Unit On: Set mode selector switch to ON.

Switching the Unit Off: Set mode selector switch to OFF.

POWER-TOOL ACTIVATION MODE

!WARNING Never connect a tool with a rating greater than the

amperes listed on the receptacle. This vacuum has a power tool outlet for use in conjunction with other appliances such as sanders, jigsaws and planers; tools with ratings greater ratings may cause a fire.

1.Check power tool nameplate for acceptable amperage rating. Only tools with rated at 7.2 amps or less should be connected to the vacuum cleaner.

2.Make sure the power tool is switched off, and then plug it in.

3.Set the mode selector switch to POWER TOOL ACTIVATION position.

4.When the power tool is switched on, the power tool automatically switches on the vacuum cleaner.

Switching The Vacuum Cleaner ON: When the power tool is switched on, the vacuum cleaner automatically switches on.

In the Power Tool Activation Mode or Pulse-Clean Mode combined with Power Tool Activation, the vacuum cleaner power is set at 4.8 amps. In the normal vacuuming and normal PULSE-CLEAN mode, the power is 11.1 amps.