Desa VP2200IT, VP2600C, VP1600IT, VP1600C installation manual Heater, To Select Heating Level

OPERATING	Thermocouple	Ignitor Electrode
HEATER		Pilot Burner

Models VP1600IT

and VP2200IT

Continued

Figure 18 - Pilot

TO SELECT HEATING LEVEL

WARNING

When running heater, set control knob at the 1, 2, 3, or 4 locked positions. Never set control knob between locked positions. Poor combustion and higher levels of carbon monoxide may result.

CAUTION

Do not try to adjust heating levels by using the manual shut- off valve.

1.Slightly press in plaque control knob on right side of heater and turn

counterclockwise C-clockwiseto the desired position.

IMPORTANT: Release downward pressure while turning control knob. Control knob will lock at the desired position.

2.Turn thermostat control knob on left side of heater to any setting between LO and HI. Note: When burners cycle on, or from LO to HI, a “click” will be heard. When the burners light, a “whoosh” noise will be heard.

Plaque
Control Knob VP1600IT	VP2200IT

1

2

3

4

1

2

3

4

1

2

3

4

1

2

3

4

Figure 19 - Burner Patterns

Continued

100751

19