Desa VP1600IT, VP2600C Operating, If you do not follow these instructions exactly, a fire or

Page 21

OPERATING

 

 

FOR YOUR SAFETY READ BEFORE LIGHTING

 

 

 

 

 

 

HEATER

 

 

 

 

 

 

 

 

 

 

 

 

WARNING

 

Models VP1600C

 

 

 

 

If you do not follow these instructions exactly, a fire or

 

and VP2600C

 

 

 

explosion may result causing property damage, personal

 

 

 

 

 

 

injury or loss of life.

 

 

 

 

 

 

 

A.This appliance has a pilot which must be lighted by hand. When lighting the pilot, follow these instructions exactly.

B.BEFORE LIGHTING smell all around the appliance area for gas. Be sure to smell next to the floor because some gas is heavier than air and will settle on the floor.

WHAT TO DO IF YOU SMELL GAS

Do not try to light any appliance.

Do not touch any electric switch; do not use any phone in your build- ing.

Immediately call your gas supplier from a neighbor’s phone. Follow the gas supplier’s instructions.

If you cannot reach your gas supplier, call the fire department.

C.Use only your hand to push in or turn the gas control knob. Never use tools. If the knob will not push in or turn by hand, don’t try to repair it, call a qualified service technician or gas supplier. Force or attempted repair may result in a fire or explosion.

D.Do not use this appliance if any part has been under water. Immediately call a qualified service technician to inspect the appliance and to replace any part of the control system and any gas control which has been under water.

LIGHTING INSTRUCTIONS

1.STOP! Read the safety information above.

2.Make sure manual shutoff valve is fully open.

3. Turn control knob clockwise Clockwise to the OFF position. Control Knob

OFF

PILOT

IGN

LOW

MED

HIGH

Figure 20 - Control Knob In The OFF Position

Continued

21

 

100751

Image 21
Contents What to do if YOU Smell GAS OWNER’S Operation and Installation ManualSafety Information ContentsSafety Information Identification FeaturesLocal Codes UnpackingCombustion Fresh AIR ForVentilation Producing Adequate VentilationFresh AIR Determining FRESH-AIR Flow for Heater LocationDetermining if You Have a Confined or Unconfined Space Fresh AIR for Combustion and Ventilation Ventilation AIRVentilation Air From Inside Building Ventilation Air From Outdoors Ventilation AIRInstallation Items Installing To WallCheck GAS Type Locating HeaterModels VP1600IT and VP2200IT Only Thermostat Sensing BulbLocating Thermostat Sensing Bulb Attaching Thermostat Sensing BulbMounting Bracket Installing Heater to WallRemoving Front Panel Of Heater Methods For Attaching Mounting Bracket To WallAttaching Mounting Bracket To Wall Marking Screw LocationsPlacing Heater On Mounting Bracket Installing Bottom Mounting ScrewsQualified service person must connect heater to gas supply Connecting To GASSupply Follow all local codesChecking GAS Pressure Testing GAS Supply Piping SystemConnections Servicing. Correct all leaks at oncePressure Testing Heater GAS Connections ConnectingOperating Heater Lighting Instructions Operating HeaterTo Select Heating Level HeaterShutting Off Burner Only pilot stays lit Shutting Off HeaterIf you do not follow these instructions exactly, a fire or OperatingModels VP1600C and VP2600C LOW MED High Pilot Flame Pattern Inspecting BurnerBurner Flame Pattern Maintenance CleaningTrouble Shooting ODS/PILOT and Burner OrificeTrouble Cleaning and MainteTROUBLE- Shooting See CleaningTechnical ServiceIf you smell gas Shut off gas supplyService Publications Hints VP1600IT VP2200ITVP1600C VP2600C Accessories Replacement PartsModel VP1600IT Illustrated Parts BreakdownKEY Part Number Description QTY Parts ListModel VP2200IT Parts List Model VP1600C Control Position Label Model VP2600C Parts List Keep this Warranty Warranty Information