GTO UL325 SERIES installation manual Table of Contents

Page 3

KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE

Table of Contents

Gate Opener Class Categories--------------------------------------------------------------

inside cover

Units and Standards Conversion Chart----------------------------------------------------

inside cover

PLEASE READ THIS FIRST!---------------------------------------------------

page iii

Important Safety Instructions ---------------------------------------------------

page 1

Disconnecting the Opener--------------------------------------------------------------

page 1

Important Safety Instructions for the Consumer------------------------------------

page 2

Secondary Means of Protection Against Entrapment-------------------------------

page 5

Required Safety Precautions for Gates-----------------------------------------------

page 6

Warning Signs and Labels--------------------------------------------------------------

page 7

Installation ---------------------------------------------------------------------------

page 8

Parts List----------------------------------------------------------------------------------

page 8

Technical Specifications --------------------------------------------------------------

page 10

Installation Overview ----------------------------------------------------------------

page 11

Installation of the Mounting Hardware-----------------------------------------------

page 12

Mounting the Opener-------------------------------------------------------------------

page 16

Installation of the Closed Position Stop----------------------------------------------

page 16

Powering the System ---------------------------------------------------------------

page 18

Solar Chart--------------------------------------------------------------------------------

page 18

Connecting the Battery-----------------------------------------------------------------

page 19

Detailed Wire Routing Diagram-------------------------------------------------------

page 20

Connecting the Transformer-----------------------------------------------------------

page 21

Connecting Solar Panel(s)--------------------------------------------------------------

page 23

Control Board Settings -----------------------------------------------------------

page 23

DIP Switches-----------------------------------------------------------------------------

page 23

Setting the Closed Position-------------------------------------------------------------

page 24

Obstuction Sensitivity and Auto-Close-----------------------------------------------

page 25

Setting Your Personal Transmitter Code -------------------------------------

page 26

Installing the Receiver ------------------------------------------------------------

page 27

Connecting Additional Safety Devices -----------------------------------------

page 28

Connecting Accessories -----------------------------------------------------------

page 30

Push to Open Installation ---------------------------------------------------------

page 33

Maintenance & Troubleshooting Guide ---------------------------------------

page 36

Repair Service ----------------------------------------------------------------------

page 38

Column Installation Information -----------------------------------------------

page 39

Accessory Catalog -----------------------------------------------------------------

page 40

Image 3
Contents 350 Installation Manual forPlace of Purchase When You Know Multiply By To Find SymbolTable of Contents Please Read this First Switch is OFF and the gate is not moving Disconnecting the OpenerEntrapment Zones for a Pull-To-Open Application For The ConsumerII. During Installation Pull-To-Open ApplicationAny control device Within gray area III. After Installation Secondary Means of Protection Against Entrapment Entrapment Alarm UL 325 30A.1.1ARequired Safety Precautions for Gates Install Warning SignsEntrapment Protection 350 Hardware Bag Contents Tools Needed Mighty Mule 350 E-Z Gate Opener Technical SpecificationsStep Installation OverviewPreparation of the Gate Pull-to-Open Gates Gate Opens into the PropertyRecommended Reinforcement Examples Installation of Mounting HardwarePost Bracket Assembly Closed Position Gate Bracket Mounting Examples Installing the Post Bracket Assembly and Gate BracketMounting the Opener Installation of the Closed Position StopCheck List Preparing to Activate the SystemSolar Panel and Gate Acticity Chart Powering the SystemConnecting the Battery MIghty Mule Wire Routing Important Deailed Wire Routing DiagramsImportant Information about LOW Voltage Wire Connecting the TransformerMake sure the exposed wires do not touch each other DIP Switch #1 Push/Pull-to-Open Connecting Solar PanelsDIP Switches Main DIP Switch Settings ModesSetting the Closed Position Limit Your Mighty Mule 350 has two Limit SettingsClosed Limit setting Setting Auto-Close Time Obstruction Sensitivity Potentiometer SettingSet the transmitter DIP Switches Remove the Transmitter CoverTeach the New Code to Control Board Memory Run the cable through PVC conduit to protect it from damage Installing the ReceiverConnecting Additional Safety Devices Contact Sensors safety edgesIf not installing a contact sensor skip to next section Exit Loop If not installing a non-contact sensor skip to next sectionIf not installing a shadow loop skip to next section Non-Contact Sensors photo beamsConnecting Accessories If not connecting accessories skip to next sectionAutomatic Gate Lock FM143 Mighty Mule Free Entry/Exit Loop Wiring Driveway Loops to the Mighty MuleMighty Mule Gate Opening Sensor FM138 When everything has been connected to the openerSwinging gates shall not open into public access areas Push to Open InstallationMODE2 LOCK/BEACON Setting the Open Position LimitTesting Your Open Limit Setting Beeps with 2 seconds off Beep when attempt to run the unit No battery is connectedPower-Cycle Beep with 2 seconds offCharging LED Red Power LED GreenGate Closes Then Opens Again on its Own Gate Opens Then Closes Again on its OwnGTO, Inc., 3121 Hartsfield Road, Tallahassee, Florida, USA Repair ServiceGate Mail techsupport@gtoinc.comMASONRY, BRICK, or Rock etc. Columns Column Installation InformationAccessories Low Voltage Wire RB509

UL325 SERIES specifications

The GTO UL325 Series is a highly regarded line of gate operators, designed to meet the needs of both residential and commercial applications. With its commitment to safety, durability, and efficiency, the UL325 Series has set a standard in the industry for gate automation solutions.

One of the main features of the GTO UL325 Series is its robust safety mechanisms. The operators are designed to comply with the rigorous UL 325 safety standards, which is essential for ensuring user safety and preventing accidents during gate operation. This includes advanced features such as obstacle detection, which allows the system to sense when an object is in the path of the gate and stop or reverse the motion to prevent harm or damage.

The UL325 Series comes with a reliable and efficient motor that provides powerful performance while operating gates of various sizes and weights. This versatility allows it to be used for a range of gate types, including swing gates and sliding gates. The motors are also designed for quiet operation, minimizing noise disturbances in residential areas.

Additionally, the GTO UL325 Series incorporates smart technology features that enhance user experience. The built-in remote control system allows users to open and close their gates with the simple push of a button from a distance. Some models also support compatibility with smartphone apps, providing users with a modern and convenient way to control their gates from anywhere.

Durability is another characteristic of the GTO UL325 Series. Constructed with high-quality materials, these gate operators are built to withstand harsh weather conditions, making them suitable for various climates. This longevity ensures that users receive a reliable product that will serve their needs for years to come.

Another noteworthy aspect of the GTO UL325 Series is the ease of installation and maintenance. The operators are designed for straightforward installation, allowing both professionals and DIY enthusiasts to set them up with minimal hassle. Additionally, regular maintenance is simplified, with clear guidelines provided to ensure longevity and reliability.

In conclusion, the GTO UL325 Series is an exemplary choice for those seeking a reliable, safe, and technologically advanced gate operator. With its emphasis on safety, versatility, and user-friendly features, it stands out in the marketplace, making it an ideal solution for both residential and commercial gate automation needs. Investing in a GTO UL325 operator means investing in peace of mind, knowing that one has a dependable and efficient gating solution.