Nilfisk-ALTO 05231F, 05220G, 05211F, 05230F, 05221F, 05220F, 05210G Nilfisk Alto Limited U.S. Warranty

Page 67

Nilfisk ALTO LIMITED U.S. WARRANTY

This Nilfisk ALTO Industrial/Commercial Product is warranted to be free from defects in materials and workmanship under normal use and service, when operated and maintained in accordance with Nilfisk ALTO's Maintenance and Operations instructions. The warranty period is subject to the conditions stated below.

3 YEARS FOR PARTS AND 1 YEAR FOR SERVICE LABOR (See exceptions below)

Motors must be inspected for carbon motor brush wear at six-month intervals by an authorized Nilfisk ALTO repair station. Failure to comply with the six-month inspection requirement or failure to replace worn motor brushes identified during the inspection will void the warranty on the motors. Cost of the six-month inspection and replacement of carbon motor brushes is the responsibility of the purchaser. In the event of a warranty claim on the motors, proof of inspection and any required motor brush replacement must be provided. This warranty is extended only to the original purchaser for use of the product. It does not cover normal wear parts such as electrical cable, rubber parts, hoses and motor brushes.

BATTERY WARRANTY

In addition to the items above, any original equipment Nilfisk ALTO Battery which becomes unserviceable under normal use within a period of ninety (90) days from date of sale to the original user will be repaired or replaced with one of equal specification at our option, F.O.B. any authorized Nilfisk ALTO Sales or Service Branch, with no charge to the user, except transportation costs. After expiration of the above ninety (90) day period, any battery which fails under normal use will be adjusted to the original user with a new battery of equal specification on an eighteen (18) months pro rate basis from the date of purchase. Adjustment will be determined using the then current list price, plus transportation costs.

Warranty is rendered null and void if battery is not kept filled to the proper level with DISTILLED WATER.

Nilfisk ALTO: POLYDUR® AUTOMATIC SCRUBBER SOLUTION AND RECOVERY TANK EIGHT-YEAR U.S. GUARANTEE

Your new Nilfisk ALTO machine has polydur Solution and Recovery Tanks. Polydur is a rotationally molded, low-density linear polyethylene that won't crack or dent, and withstands most corrosives and temperature extremes. Nilfisk ALTO backs up your Polydur tanks with an eight-year guarantee. If a tank breaks or leaks under normal use within eight years of the date of purchase, it will be replaced free.

Nilfisk ALTO UNIBODY FRAME FIVE-YEAR U.S. WARRANTY

Nilfisk ALTO warranties the frame for a period of five years against defects in materials and workmanship under normal use and service.

STATED WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED

Nilfisk ALTO's liability under this warranty is limited to repair of the product and/or replacement of parts and is given to pur- chaser in lieu of all other remedies, including INCIDENTAL AND CONSEQUENTIAL DAMAGES.

THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE SPECIFIED HEREIN. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION OF THE FACE HEREOF. NO WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTY OF MERCHANTABILITY, SHALL BE IMPLIED. A warranty registration card is provided with your Nilfisk ALTO product. Return the card to assist Nilfisk ALTO in providing the performance you expect from your new floor machine.

If a difficulty develops with the product, you should: a) Contact the nearest authorized Nilfisk ALTO repair location or contact Nilfisk-Advance for the nearest authorized Nilfisk ALTO repair location. Only these locations are authorized to make repairs to the product under this warranty. (b) Return the product to the nearest Nilfisk ALTO repair location. Transportation charges to and from the repair location must be prepaid by the purchaser. Nilfisk ALTO will repair the product and/or replace any defective parts with out charge within a reasonable time after receipt of the product.

Nilfisk ALTO reserves the right to make changes or improvements to its machine without notice.

Always use genuine Nilfisk ALTO Parts for repair.

Image 67
Contents Read this Manual Operators ManualTable of Contents Operator Safety Instructions Operator Safety Instructions Machine Specifications IntroductionModel SpecificationsHow To Put The Machine In a Van Or Truck Procedures for TransportingSymbols Used on Symbols Used on Scrubtec 770, 78471017A use Charge / Battery Meter Solo See Figure #1, Item H1 Increase Brush Pressure Switch See Figure #1, Item DD a Machine Control Panel 770L, 784L & 795L K J H Display Screens for Scrubtec 770L, 784L, 795L Figure #4 Machine Controls & FeaturesHow To Install The Batteries HOW to Prepare the Machine for OPERA- TionBattery Maintenance HOW to Prepare the Machine for OperationFigure # How To Charge The BatteriesFigure #9 How To Remove The Brushes Or Pad DriversFigure #11 Reprogramming One TouchHow to Fill The Solution Tank How To Operate the Squeegee S Class models onlyHow to Clean a Floor How To Traverse MachineThese Maintenance Procedures Must Be Done Every Day How to Clean a Very Dirty FloorDo These Procedures When You Begin Your Work Period Figure #21 Do These Procedures When You End Your WorkFigure #25 Figure #24Adjusting Squeegee Tilt Maintenance For The SqueegeeHow To Adjust The Squeegee Adjusting Squeegee PressureHow to Clean the Solution Line Adjusting Squeegee BladesHOW to Correct Problems in the Machine Scrubtec 770L / 784L / 795L WB Common Error Codes Form no a Nilfisk Alto Operators Manual Scrubtec 770 / 784 Section 31 30 29 Ref. No Qty Description Nilfisk Alto Scrubtec 770 / 784 Recovery Tank Assembly 12/09 Scrubtec 770 / 784 Form no a Nilfisk Alto Operators Manual Scrubtec 770 / 784 Electrical Panel Assembly / Solo Speed Controller 12/09 Form no a Nilfisk Alto Operators Manual Scrubtec 770 / 784 Scrubtec 770 S / 784 S / 795 S Form no a Nilfisk Alto Operators Manual Scrubtec 770 / 784 Electrical Panel Assembly Parts List 2/07 18A 920208 Nut, 1/4-20 962968 Screw, 10-24 x 1/2 40749A Form no a Nilfisk Alto Operators Manual Scrubtec 770 / 784 Scr 6-32 x Form no a Nilfisk Alto Operators Manual Scrubtec 770 / 784 Ref. No Qty Description Nilfisk Alto Scrubtec 770 Squeegee Assembly 12/09 Scrubtec 770 Scrubtec Squeegee Assembly 12/09 Ref. No Qty Description Nilfisk Alto Scrubtec 770 / 784 Traverse System Assembly 2/05 Ref. No Qty Description Nilfisk Alto Operators Manual Scrubtec 770 / 784 Nilfisk Alto Operators Manual Scrubtec 770 / 784 Nilfisk Alto Scrubtec 770 / 784 Brush Motor #45036A 2/05 Nilfisk Alto Operators Manual Scrubtec 770 / 784 Permanent Magnet Motor MFG. in USA Parking Brake Spare Parts PN 59116APAD Drivers BrushesNilfisk Alto Operators Manual Scrubtec 770 / 784 Form no a Nilfisk Alto Operators Manual Scrubtec 770 / 784 Electrical Schematic 9/05 Page Page Year of Affixing the CE marking Always use genuine Nilfisk Alto Parts for repair Nilfisk Alto Limited U.S. Warranty