MACHINE CONTROLS & FEATURES
Squeegee Lift Handle (“S Class” models only) See Figure #3a, 3b, & 3c.
The squeegee lift handle is located below the control handles on the right side. It is used to raise or lower the squeegee. The vac motor is turned on when the handle is lowered.
Parking Brake (Optional)See Figure #4.
The parking brake prevents movement of the machine. The brake is located on the left hand side of the transaxle motor. Turn the key switch off or disconnect the power to the battery to apply the brake.
There is a mechanical lever located on the brake. This lever is an override. To manually release the brake, rotate the lever toward the rear of machine (counter clockwise). To return the brake to normal or to apply the brake, rotate the lever towards the front of the machine (clockwise). NOTE: If the lever is left in the override position, the brake will not function with the key switch, and the machine will not operate.
CAUTION!
Do not activate the brake while the machine is moving.
Float Shut Off See Figure #5.
The
Figure #4
Figure #5
EN
Figure #3a
Figure #3b
Figure #3c
Nilfisk ALTO Operator's Manual - SCRUBTEC 770 / 784 / 795 | FORM NO. 70935A - 15 - |