Nilfisk-ALTO 05220G HOW to Prepare the Machine for OPERA- Tion, How To Install The Batteries

Page 16

HOW TO PREPARE THE MACHINE FOR OPERA- TION

How To Install The Batteries

The Scrubtec machines use six 6-volt batteries. The batteries are located in the battery compartment under the recovery tank.

To Install the batteries, follow this procedure:

1.Turn key switch off.

2.Make sure both tanks are empty.

3.Disconnect the hoses from the recovery tank (upper tank) & unplug the vac motor and ﬂoat switch.

4.Remove the tank support bracket.

5.Remove the recovery tank.

6.Place the batteries in the solution tank as shown in ﬁgures 6a and 6b.

WARNING!

Lifting batteries without help could result in an injury. Get help to lift the batteries. The batteries are heavy.

WARNING!

Working with batteries can be dangerous. Always wear eye protection and protective clothing when working near batteries. NO SMOKING!

7.Connect the battery cables between batteries and install long battery cable assembly as indicated. See ﬁgure 6a and 6b.

8.Install the tank, reconnecting hoses and plugging in vac motor and ﬂoat switch connectors. Install tank support bracket.

NOTE: Charge the batteries before using the machine.

38722B

38720B	38720B
	38722B

38720B

38722B

Figure #6a

38722B

38722B

38722B

Figure #6b

-16- FORM NO. 70935A

Nilﬁsk ALTO Operator's Manual - SCRUBTEC 770 / 784 / 795

Image 16

Contents Operators Manual Read this ManualTable of Contents Operator Safety Instructions Operator Safety Instructions Introduction Machine SpeciﬁcationsSpecifications ModelProcedures for Transporting How To Put The Machine In a Van Or TruckSymbols Used on Scrubtec 770, 784 Symbols Used on71017A use Increase Brush Pressure Switch See Figure #1, Item D Charge / Battery Meter Solo See Figure #1, Item H1D a Machine Control Panel 770L, 784L & 795L K J H Display Screens for Scrubtec 770L, 784L, 795L Machine Controls & Features Figure #4HOW to Prepare the Machine for OPERA- Tion How To Install The BatteriesHOW to Prepare the Machine for Operation Battery MaintenanceHow To Charge The Batteries Figure #How To Remove The Brushes Or Pad Drivers Figure #9Reprogramming One Touch Figure #11How To Operate the Squeegee S Class models only How to Fill The Solution TankHow To Traverse Machine How to Clean a FloorThese Maintenance Procedures Must Be Done Every Day How to Clean a Very Dirty FloorDo These Procedures When You Begin Your Work Period Do These Procedures When You End Your Work Figure #21Figure #24 Figure #25Maintenance For The Squeegee How To Adjust The SqueegeeAdjusting Squeegee Pressure Adjusting Squeegee TiltAdjusting Squeegee Blades How to Clean the Solution LineHOW to Correct Problems in the Machine Scrubtec 770L / 784L / 795L WB Common Error Codes Form no a Nilﬁsk Alto Operators Manual Scrubtec 770 / 784 Section 31 30 29 Ref. No Qty Description Nilﬁsk Alto Scrubtec 770 / 784 Recovery Tank Assembly 12/09 Scrubtec 770 / 784 Form no a Nilﬁsk Alto Operators Manual Scrubtec 770 / 784 Electrical Panel Assembly / Solo Speed Controller 12/09 Form no a Nilﬁsk Alto Operators Manual Scrubtec 770 / 784 Scrubtec 770 S / 784 S / 795 S Form no a Nilﬁsk Alto Operators Manual Scrubtec 770 / 784 Electrical Panel Assembly Parts List 2/07 18A 920208 Nut, 1/4-20 962968 Screw, 10-24 x 1/2 40749A Form no a Nilﬁsk Alto Operators Manual Scrubtec 770 / 784 Scr 6-32 x Form no a Nilﬁsk Alto Operators Manual Scrubtec 770 / 784 Ref. No Qty Description Nilﬁsk Alto Scrubtec 770 Squeegee Assembly 12/09 Scrubtec 770 Scrubtec Squeegee Assembly 12/09 Ref. No Qty Description Nilﬁsk Alto Scrubtec 770 / 784 Traverse System Assembly 2/05 Ref. No Qty Description Nilﬁsk Alto Operators Manual Scrubtec 770 / 784 Nilﬁsk Alto Operators Manual Scrubtec 770 / 784 Nilﬁsk Alto Scrubtec 770 / 784 Brush Motor #45036A 2/05 Nilﬁsk Alto Operators Manual Scrubtec 770 / 784 Permanent Magnet Motor MFG. in USA PN 59116A Parking Brake Spare PartsBrushes PAD DriversNilﬁsk Alto Operators Manual Scrubtec 770 / 784 Form no a Nilﬁsk Alto Operators Manual Scrubtec 770 / 784 Electrical Schematic 9/05 Page Page Year of Affixing the CE marking Nilﬁsk Alto Limited U.S. Warranty Always use genuine Nilﬁsk Alto Parts for repair