Nilfisk-ALTO 05231F, 05220G, 05211F, 05230F, 05221F Squeegee Assembly 12/09 Ref. No Qty Description

Nilfisk ALTO

SCRUBTEC 795

Squeegee Assembly 12/09

Item	Ref. No.	Qty	Description
	10817KL	1	Squeegee Assy (STD)
1	25201B	2	Knob
2	34260B	1	Squeegee Gasket
3	81301A	2	Nut, Jam SS
4	60248A	2	Sleeve
5	30048A	2	Guide Wheel
6	81217A	2	Nut, 1/4-20 ESNA
7	80316A	2	Screw, ¼-20 x 1 Flat SS
8	38715A	2	Spacer (38)
9	62712A	1	Air Duct
10	37016A	1	Grip Pad
11	80011A	2	Screw, .375-16 x 3.00
12	30718L2	1	Blade, Inner Linatex (STD)
*	30718A	1	Blade-Front Gum Rubber (OPT)
*	30954A	1	Blade-Front Urethane (OPT)
13	30935L	1	Blade, Outer Linatex (STD)
*	30935A	1	Blade-Rear Gum Rubber (OPT)
14	62444A	1	Clamp, Weld
15	170932	2	Rivet
16	55722A	1	Squeegee Strap Latch
17	86004A	1	Screw, .25-20 x 1.50 Hex
18	62421A	1	End Clamp
19	54766A	2	Insert,Threaded 5/16-24
20	85702A	2	Screw, .25-20 x 1.75
21	64905A	2	T-Handle
22	85816A	2	Screw, .312-18 x 1.75
23	59971A	2	Wheel
24	65975A	2	Wheel Mount Bracket
25	920110	3	Nut, ESNA
26	81104A	6	Nut, Hex ESNA SS
27	69675A	1	Squeegee Base

* = Optional, Not Included

NOTE: When changing squeegee blades, it might be necessary to loosen screw #11; install and secure blades with clamp #14; then retighten screw #11. This will allow for different thickness.

Nilfisk ALTO Operator's Manual - SCRUBTEC 770 / 784 / 795 FORM NO. 70935A - 51 -