Brother XL-2600 operation manual Straight Stitching / Costura recta, Puntada recta 64-3/16, 16-0

Page 42

2STRAIGHT AND ZIGZAG STITCHING COSTURA RECTA Y EN ZIG-ZAG

Please Read Before Sewing / Lea lo siguiente antes de utilizar la máquina

CAUTION/PRECAUCIÓN

To avoid being injured, watch the needle carefully while you are using the machine. Keep your hands away from moving parts.

Do not stretch or pull the fabric during sewing, otherwise the needle may be damaged and you may be injured.

Do not use bent or broken needles, otherwise you may be injured.

Take care that the needle does not hit basting pins or other objects during sewing. The needle may break and you may be injured.

Always use the correct presser foot. If you use the wrong presser foot, the needle may hit the presser foot and bend or break and you may be injured.

When you turn the handwheel by hand, always turn it toward you (counterclockwise). Turning it the other way may cause the thread to tangle and damage the needle or fabric, and you may be injured.

Para evitar lesiones, observe con atención la aguja mientras utiliza la máquina. Mantenga las manos alejadas de las piezas en movimiento.

No estire ni empuje la tela durante la costura, pues la aguja podría dañarse y producir lesiones.

No utilice agujas dobladas o rotas, ya que podría resultar lesionado.

Tenga cuidado de que la aguja no golpee las patillas de hilvanado ni otros objetos durante la costura. La aguja podría romperse y usted podría resultar lesionado.

Utilice siempre el pie prensatela adecuado. Si utiliza un pie prensatela erróneo, la aguja puede golpearlo y doblarse o romperse, y podría causar lesiones.

Al girar la rueda a mano, gírela siempre hacia usted (hacia la izquierda). Si la gira en sentido contrario, el hilo podría engancharse y causar daños en la aguja o la tela, y podría lesionarse.

2

Straight Stitching / Costura recta

Stitch Name

 

 

Length

 

Width

 

 

 

Pattern

[mm (inch)]

 

[mm (inch)]

Nombre de la

 

Dibujo

Longitud

 

Anchura [mm

puntada

 

 

 

[mm (pulg.)]

 

(pulg.)]

 

 

 

 

Straight Stitch

 

 

1-4

 

 

 

 

 

 

Puntada recta

 

 

(1/64-3/16)

 

5-0*

 

 

 

 

 

 

 

 

 

 

 

Triple Stretch

 

 

Fixed / Fija

 

 

 

(3/16-0)

Stitch

 

 

2.5 (3/32)

 

 

 

 

 

 

Puntada elástica

 

 

Fixed / Fija

 

 

 

 

 

 

 

 

 

 

triple

 

 

2.5 (3/32)

 

 

*Turn the stitch width dial to adjust the needle position. Setting the dial to 5 selects the left needle position; setting the dial to 0 selects the right needle position.

Gire el control de anchura de puntada para ajustar la posición de la aguja. El ajuste del control en 5 selecciona la posición izquierda para la aguja, mientras que el ajuste 0 selecciona la posición derecha.

41

Image 42
Contents Manual de Instrucciones Important Safety Instructions Instrucciones Importantes DE Seguridad For Users in the UK, EIRE, Malta and Cyprus only Please Read These Instructions Before YOU USE the Machine LEA Estas Instrucciones Antes DE Utilizar LA Máquina Contents Appendix Contenido USO DE Accesorios Y Aplicaciones Knowing Your Sewing Machine Main PartsConozca SU Máquina DE Coser Accessories / Accesorios Part Name Part CodeOptional Accessories / Accesorios opcionales Part Name Part Code OthersUsing Your Sewing Machine USO DE LA Máquina DE Coser Machine must be unplugged. For U.S.A. only Connecting Plugs Conexión de enchufesFoot Controller / Pedal Sólo para EE.UUChecking the Needle Comprobación de la aguja Replacing the Needle Cambio de la agujaPresser foot lever / Palanca del pie prensatela Changing the Presser Foot Cambio del pie prensatela Using a Free-arm Style Uso del estilo de brazo libre Flat Bed Attachment Unidad de cama planaSlide the flat bed attachment to the left to release it Controls / Controles Pattern Selection Dial Selector de puntadasPosition / Cambio Stitches / 25 puntadas3/16 64-1/16 16-3/16 De posición de la AgujaFixed / Fija Fixed / Fija Aguja 3/323/16 Fixed / Fija 13/64 3/32 3/16 3/32Stitch Length Dial Control de longitud de puntada Stretch Stitching Costura elásticaSelecting a Stretch Stitch Stitch Width Dial Control de anchura de puntada Reverse Sewing Lever Pulsador de retrocesoThreading the Machine / Enhebrado DE LA Máquina Winding the Bobbin / Devanado de la bobinaPage Lower Threading Enhebrado del hilo inferior Cover / Tapa Slide button / Deslizador Cover as shown by the line This feature is only available on certain modelsReplace the cover so that the end IllustrationUsed with this machine Esta máquinaThread unrolls in the wrong direction Upper Threading / Enhebrado del hilo superior Suba el pie prensatela con la palanca del pie prensatela4Feed the upper thread as previously shown Putneedle.the thread behind the guide aboveApague la máquina y baje la palanca del pie prensatela Page 3Replace the bobbin cover Sewing with a Twin Needle Costura con aguja gemelaQuick-set Bobbin Threading Vuelva a colocar la tapa de la bobina2Thread the right needle Twin Needle ThreadingUse only twin needles that have been made for Attaching the Twin NeedleUpper Tension is too Loose Solution / SoluciónThread Tension Tensión del hilo Upper Tension is too TightMedium FabricsMemo/Recuerde Straight Stitching / Costura recta Puntada recta 64-3/1616-0 Thread could tangle or the needle could Make sure the needle does not hit a pinOr any other object during sewing. Changing Sewing DirectionPara preparar la máquina para la siguiente Zigzag Stitching Costura en zig-zagMachine Top Stitching and Stretch MaterialsStraight and Zigzag Stitching / Costura Recta Y EN ZIG-ZAG Blind Hem Stitching Costura invisible para dobladillo Sew on the fold as in Fig. CCosa en el pliegue como se indica en la figura C Elastic Stitching Costura elástica Adjust the thread tension so that it is tighter than normalShell Tuck Stitching Costura de concha Sew at a slow speedDouble Action Stitching Costura de doble acción Sewing Elastic / Costura de gomasPuntada de Heirloom Stitching Puntada de adornosOveredge Stitching Costura de sobreorilla 3/16Feather Stitching Costura de plumas 1Setstitch.the pattern selection dial to an overedgeAjuste el selector de puntadas en la puntada de sobreorilla Decorative Stitching Costura decorativa PuntadaPage Lowerslightly.the buttonhole lever and push it back Baje la palanca para ojales y empújela hacia atrás un pocoLas tachuelas del ojal se cosen en el orden que se muestra Pare la máquina cuando termine de coser el ojal+ direction Adjusting Buttonholes Ajuste de ojalesDirection Destornillador grande en la direcciónSewing Buttons Costura de botones 2Turn off the machineRecta Zipper Insertion Costura de cremallerasCentro Turnfoot. off the machine and raise the presserSewstitches.a single row or many rows of straight Gathering / FruncidosSetStitch.the pattern selection dial to Straight 4Pull the lower threads to gather the materialDarning / Zurcidos Appliqués / AplicacionesPie Placa Puntada Cualquiera 3Cutstitching.away any fabric that is left outside Be careful that the needle does not hit a2Set the pattern selection dial to Zigzag Stitch Keep fingers away from moving parts, especially needles Cosa el contorno del diseño moviendo el aro de bordado Asegure con unas cuantas puntadas rectas al final del diseñoOptional Accessories / Accesorios Opcionales Using the Walking Foot Utilización del pie móvilTurn off the machine 2Raise the needle and the presser foot Using the Quilting Foot Utilización del pie para acolchados1Turn off the machine Levante la aguja y el pie prensatela6SetStitch.the pattern selection dial to the Straight Attach the 1/4-inch Quilting Foot. Turn on the machine Using the 1/4-inch Quilting FootUtilización del pie para acolchados de 1/4 pulgadas Stitching the Top of a QuiltDespués de coser entre 2 3/4 pulg. y 3 cm Any Puntada Cualquiera Recta Attach the Blind Stitch Foot. Turn on the machineSetStitch.the pattern selection dial to the Zigzag When Sewing Seams / Para coser costurasWhen Blind Hem Stitching Ajuste el selector de puntadas en la puntada de zig-zagMaintenance / Mantenimiento Changing the Light Bulb Cambio de la bombillaCoja la caja de la bobina y tire de ella hacia la izquierda Cleaning / LimpiezaGraspthe left.the bobbin case, and then lift it out to Do not apply oil to the bobbin caseInstall the needle plate cover Troubleshooting Thread ten LowerOr breaks Fabric isThere is a high Stitches areSkipped Pitched noise While sewingSolución de problemas Devane el hilo de la bobina Elija la aguja adecuada para el tipoEl hilo superior Que está utilizando De costura Se rompe Caja de la bobina Está enredado o Se rompeRetire la cubierta de la placa de la Correctamente SuperiorCorrectamente No ha enhebrado el hilo superior Placa de la aguja o en la caja de laEstá enganchado en la caja de la Bobina, limpie la caja Sustituya la bombilla de costuraCostura no se Enciende Index NumericsÍndice ENGLISH/SPANISH

XL-2600 specifications

The Brother XL-2600 is a versatile and user-friendly sewing machine that has gained popularity among both beginners and experienced crafters. Packed with features and advanced technologies, it presents a seamless sewing experience that caters to various projects, from basic repairs to intricate designs.

One of the standout features of the Brother XL-2600 is its 25 built-in stitches. This includes a variety of utility stitches, decorative stitches, and a straight stitch, providing sewists with ample options to explore their creativity. The machine offers a one-step automatic buttonhole function, making it easy to sew buttonholes in different sizes. This feature is especially beneficial for those looking to produce professional-quality garments or home décor.

The XL-2600 is equipped with a lightweight and portable design, making it ideal for those who attend sewing classes or need to store their machine when not in use. The easily accessible free arm allows users to sew cuffs and pant hems effortlessly, enhancing the machine's usability for everyday sewing tasks. The built-in needle threader simplifies the threading process, allowing users to get started on their projects quickly and with minimal frustration.

Brother’s innovative technology is evident in the XL-2600’s drop-in bobbin system. This design allows for easy loading and monitoring of the bobbin thread, ensuring smooth stitching without the hassle of complicated setups. The machine also has a built-in stitch width and length adjustment, allowing users to customize their stitches for different fabrics and sewing techniques.

The foot control feature gives sewists full control over their sewing speed, making it simple to work on detailed projects or larger tasks efficiently. Additionally, the included accessories—such as multiple presser feet, a seam ripper, and various needles—provide everything needed to get started right out of the box.

The Brother XL-2600 is compatible with various fabric types, including cotton, denim, and more, making it a robust option for any sewing enthusiast. Its durability and reliability ensure lasting performance, while the intuitive design makes it accessible for users of all skill levels. Overall, the XL-2600 is an excellent choice for anyone looking to enhance their sewing experience while enjoying the freedom to create.