Harman-Kardon AVR 146 owner manual Antennas, Analog Video, Is colored red. See Figure, Video cable

Page 18

CONNECTIONS

AVR 146 processing any of the data. Although this enables the AVR 146 to be compatible with virtually any HDMI-capable source device and video display, it requires a separate audio connection for each source since the AVR 146 doesn’t have access to the audio data in the HDMI stream.

The AVR 146 has been tested and is Simplay HD™-verified, which guarantees compatibility via the HDMI connection with other products that also bear the Simplay HD logo.

The AVR 146 will not convert analog video signals to the HDMI format, and the on-screen displays are not visible when using an HDMI source. Therefore, you will need to connect the composite or S-video monitor output to your video display (or both, depending on which video connections your sources use) to view the on-screen menus.

The physical HDMI connection is simple. The connector is shaped for easy plug-in (see Figure 9). If your video display has a DVI input, you may use an HDMI-to-DVI adapter (not included) to connect it to the AVR’s HDMI Output.

Figure 9 – HDMI Connection

Analog Video

There are three types of analog video connections: composite video, S-video and component video.

Composite video is the basic connection most commonly available. The jack is usually color-coded yellow, and looks like an analog audio jack, although it is important never to confuse the two. Do not plug a composite video cable into an analog or coaxial digital audio jack, or vice versa. Both the chrominance (color) and luminance (intensity) components of the video signal are transmitted using a single cable. See Figure 10.

Composite video cable

Figure 10 – Composite Video

S-video, or “separate” video, transmits the chrominance and luminance components using separate wires contained within a single cable. The plug on an S-video cable contains four metal pins, plus a plastic guide pin. Be careful to line up the plug correctly when you insert it into the jack on the receiver, source or video display. See Figure 11.

S-video cable

Figure 11 – S-Video

Component video separates the video signal into three components – one luminance (“Y”) and two subsampled color signals (“Pb” and “Pr”) – that are transmitted using three separate cables. The “Y” cable is color-coded green, the “Pb” cable is colored blue and the “Pr” cable

is colored red. See Figure 12.

Component video cable

Figure 12 – Component Video

If it’s available on your video display, HDMI is recommended as the best quality connection, followed by component video, S-video and then composite video.

NOTE: A composite or S-video connection to your TV is required to view the AVR’s on-screen displays.

Antennas

The AVR 146 uses separate terminals for the included FM and AM antennas that provide proper reception for the tuner.

The FM antenna uses a 75-ohm F-connector. See Figure 13.

Figure 13 – FM Antenna

The AM loop antenna needs to be assembled. Then connect the two leads to the screw terminals on the receiver. See Figure 14.

Figure 14 – AM Antenna

18

18

Page 17 Page 19
Image 18
Page 17 Page 19
Contents AVR Safety Information Outdoor Antenna Grounding. If an outside antennaImportant Safety Information Staple Invoice Here Table of Contents Audio Section IntroductionThank you for choosing Harman Kardon Surround ModesAudio/Video Inputs With S-Video Supplied AccessoriesAudio Inputs Digital Audio InputsFRONT-PANEL Controls Input Indicators REAR-PANEL Connections Outputs Input Video ComponentFM Antenna Inputs VideoRemote Control Functions Channel Input Selector Press this button to selectBridge/DMP Controls an iPod docked in The Bridge Power On AVR SelectorRemote Control Functions Typical Home Theater System Introduction to Home TheaterSurround Modes Multichannel AudioSpeaker Connections Connecting Source Devices to the AVRConnections SubwooferVideo Connections Audio ConnectionsDigital Audio Analog AudioAnalog Video FM antenna uses a 75-ohm F-connector. See FigureAntennas Is colored red. See FigureSpeaker Placement Step Two Connect the Subwoofer InstallationStep One Connect the Speakers Step Three Connect the AntennasTiVo or other Or Video 1 Composite Video Input Device TypeAudio Connections Video Connections Coax digital output Component video connections at allVideo 1 Source Video 2 SourceVideo 3 Source Hdmi 2 Source Step Five Connect the Video DisplayHdmi 1 Source No video connections are neededStep Six Plug in AC Power Step Seven Insert Batteries in RemoteVideo Cable, Satellite Turn on your source deviceEnter a code from above Cable/SatelliteStep Nine Turn On the AVR Two steps are required the first time you turn on the AVRInitial Setup Using the On-Screen Menu SystemStep One Determine Speaker Size Step Three Manual Setup Menu Step Two Measure Speaker DistancesSpeaker Size Menu Is not present, such as when a DVD is paused Speaker Crossover MenuDelay Adjust Menu Step Four Output Level CalibrationSee Figure Using the Remote Control With Source Material Using the Full-OSD MenuStep Five Configure Sources Tuner at this timeInput Setup Menu Screen for DMP/The Bridge source Operation Sleep TimerVolume Control Turning On the AVRTone Controls HeadphonesMute Function Source SelectionVideo Input Selection When you wish to view a DVD, simply select the DVD sourceAudio Input Selection Channel Direct InputsUsing the Tuner Channel Input SelectorUsing TheBridgeTM RecordingSelecting a Surround Mode Select a Surround Mode RemoteAdvanced Functions Analog Audio SignalsDigital Audio Signals Audio Processing and Surround SoundSurround Modes Dolby Surround Settings Default ModesProvides descriptions of all surround modes available on Dolby Digital EX played as Panorama adjusts wraparound surround effect0 or Passages to avoid disturbing othersSurround Mode Description Incoming Bitstream or Signal Dim Function System SettingsAdvanced Remote Control Functions Punch-Through ProgrammingPress the Power Off Button to program the Power Off command To program, or record a macro, follow these stepsTo program punch-through control while operating any device Processor Reset Resetting the RemoteMemory Troubleshooting Guide AVR 146 Technical Specifications DTSTable A2 Speaker/Channel Setting Defaults Appendix Default settings, worksheets, remote product codesTable A1 Source Input Setting Defaults Table A3 Delay Setting DefaultsTable A4 Source Input Settings Table A5 Speaker/Channel SettingsFeature Default Setting Your Setting Table A6 Remote Control CodesTable A7 System Settings Off Volume Default Default Vol Set 25dBTable A8 Remote Control Function List TV VID3Remote Control Function List Table A8Aiwa Table A9 Table A10Table A11 Remote Control Product Codes CD Table A12 Remote Control Product Codes DVDTable A14 Remote Control Product Codes Tape Table A15 Remote Control Product Codes CBLTable A16 Remote Control Product Codes Table A15
Related manuals
Manual 1 pages 4.96 Kb

AVR 146 specifications

The Harman-Kardon AVR 146 is a versatile audio-video receiver designed to elevate home entertainment experiences. A product of the renowned Harman-Kardon brand, this receiver combines advanced audio technologies, user-friendly features, and sleek design, making it a popular choice for audiophiles and casual listeners alike.

One of the standout characteristics of the AVR 146 is its power output. It delivers 50 watts per channel across seven channels, allowing it to easily drive a wide range of speakers while ensuring that dynamic soundscapes are reproduced with clarity and depth. This capability makes it suitable for both movies and music, enhancing the overall auditory experience in home theater setups.

The AVR 146 supports high-definition audio formats, including Dolby TrueHD and DTS-HD Master Audio. These formats provide lossless sound quality, allowing listeners to appreciate every nuance of their favorite films and albums. The receiver's support for a 7.1 channel layout enriches movie nights with a surround sound experience, drawing viewers deeper into the action.

Connectivity is another key feature of the AVR 146. It is equipped with multiple HDMI inputs, allowing users to connect several high-definition devices such as Blu-ray players, gaming consoles, and streaming devices. This ensures that users can enjoy high-quality audio and video without the need for constant plug-and-play. Additionally, the receiver features an array of analog and digital inputs, which further broaden its compatibility with various devices.

Setup and operation are simplified by the inclusion of the user-friendly on-screen graphical interface. This intuitive design makes it easy to navigate through the various settings and features, allowing users to customize their audio preferences with ease. The AVR 146 also incorporates the Harman Kardon Quick Select feature, which allows users to save their favorite settings for different sources for quick access.

In terms of design, the Harman-Kardon AVR 146 showcases a modern and elegant appearance synonymous with the brand's aesthetic. It features a sleek front panel with an easy-to-read display and well-organized buttons, blending seamlessly into home environments.

In summary, the Harman-Kardon AVR 146 is a well-rounded audio-video receiver that promises exceptional performance and versatility. With its combination of powerful amplification, support for advanced audio formats, extensive connectivity options, and a user-friendly interface, it is an excellent choice for anyone looking to enhance their home entertainment system. Whether for movie enthusiasts or music lovers, the AVR 146 delivers an auditory experience that impresses and satisfies.
Top Page Image Contents