Harman-Kardon AVR 146 owner manual Initial Setup, Using the On-Screen Menu System

Page 27

Before you begin enjoying your new receiver, a few adjustments should be made to configure the AVR 146 to match your actual system.

Make sure that you have connected a video display to either the S-video or composite video monitor output on the receiver. When you turn on your display and the AVR, you should see a blue screen. A message may appear briefly at the bottom of the screen. This message is part of the on-screen display system, and is referred to as the “semi-OSD”. The semi-OSD is activated any time you send a command to the AVR, and any time the AVR detects a change in the incoming signal. Semi-OSD messages are overlaid on top of any video signal, so that you may continue to watch your program while making adjustments to the AVR.

Although it’s possible to configure the AVR using only the remote and the semi-OSD messages, we recommend that you use the full-screen menu system, known as the “full OSD”.

Using the On-Screen Menu System

The full OSD system is accessed by pressing the OSD Button on the remote. See Figure 37. While the full OSD system is in use, it isn’t possible to see any video programming. In addition, an OSD ON message will appear on the front panel of the receiver to remind you to use a video display.

Figure 37 – Navigation Buttons

The Master Menu will always be displayed when you first press the OSD Button. Use the ⁄/¤ Buttons on the remote to point the cursor to different lines in the menu. Press the Set Button on the remote to select a line that has no setting to be adjusted, such as one of the sub- menus listed in the Master Menu, or a line that returns you to a previous menu. Within the submenus, after you have positioned the cursor at a particular line item, use the ‹/› Buttons on the remote to change a setting. When the desired setting appears, use the ⁄/¤ Buttons to navigate to another line item. Except for the TITLE setting in the INPUT SETUP menu, there is no need to press the Set Button after your desired setting appears.

The Master Menu allows access to four submenus: Input Setup, Surround Select, Manual Setup and System Setup. See Figure 38.

INITIAL SETUP

Figure 38 – Master Menu Screen

If you are an experienced home theater user, you may prefer to use the menus in this order:

1.System Setup (described in Advanced Functions section)

2.Manual Setup (described here and in Advanced Functions)

3.Input Setup (described in this section)

4.Surround Select (see Advanced Functions section)

We recommend that most users follow the instructions in this INITIAL SETUP section to configure a basic home theater system. You may return to these menus at any time to make additional adjustments. We suggest that you record your configuration settings in the appropriate places in Tables A3 through A7 in the appendix in case you need to reenter them after a system reset, or if the AVR’s Master Power Switch is turned off or the unit is unplugged for more than four weeks.

This section requires that you complete all of the steps in the Installation section that apply to your receiver. You should have connected all of your loudspeakers and a video display, as well as your source devices. You should be able to turn on the receiver and view a blue screen on your video display. If necessary, reread the Installation Section before continuing.

Step One – Determine Speaker Size

The AVR 146 can’t detect how many speakers you’ve connected to it; nor can it determine their capabilities. For this part of the system setup, you will need to consult the owner’s guide for each of your speakers. If you don’t have the guide, you may be able to obtain the speaker’s technical specifications from the manufacturer’s Web site, or by contacting the manufacturer directly.

The specification you’re looking for is the frequency response, which is usually given as a range, e.g., 100Hz – 20kHz (±3dB). This specification tells you whether the speaker is able to play sounds that are very high or low-pitched, represented by the high and low frequencies. We are concerned with the lowest frequency that each of your main speakers is capable of playing, which is 100Hz in this example. Use the Table A5 worksheet in the appendix to note this number as the crossover for that speaker (not the same as the crossover frequency listed in the speaker’s specifications).

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents AVR Outdoor Antenna Grounding. If an outside antenna Safety InformationImportant Safety Information Staple Invoice Here Table of Contents Surround Modes IntroductionThank you for choosing Harman Kardon Audio SectionDigital Audio Inputs Supplied AccessoriesAudio Inputs Audio/Video Inputs With S-VideoFRONT-PANEL Controls Input Indicators REAR-PANEL Connections Video Video ComponentFM Antenna Inputs Outputs InputRemote Control Functions Channel Input Selector Press this button to selectBridge/DMP Controls an iPod docked in The Bridge AVR Selector Power OnRemote Control Functions Multichannel Audio Introduction to Home TheaterSurround Modes Typical Home Theater SystemSubwoofer Connecting Source Devices to the AVRConnections Speaker ConnectionsAnalog Audio Audio ConnectionsDigital Audio Video ConnectionsIs colored red. See Figure FM antenna uses a 75-ohm F-connector. See FigureAntennas Analog VideoSpeaker Placement Step Three Connect the Antennas InstallationStep One Connect the Speakers Step Two Connect the SubwooferCoax digital output Component video connections at all Device TypeAudio Connections Video Connections TiVo or other Or Video 1 Composite Video InputVideo 1 Source Video 2 SourceVideo 3 Source No video connections are needed Step Five Connect the Video DisplayHdmi 1 Source Hdmi 2 SourceStep Seven Insert Batteries in Remote Step Six Plug in AC PowerCable/Satellite Turn on your source deviceEnter a code from above Video Cable, SatelliteTwo steps are required the first time you turn on the AVR Step Nine Turn On the AVRInitial Setup Using the On-Screen Menu SystemStep One Determine Speaker Size Step Three Manual Setup Menu Step Two Measure Speaker DistancesSpeaker Size Menu Speaker Crossover Menu Is not present, such as when a DVD is pausedDelay Adjust Menu Step Four Output Level CalibrationSee Figure Using the Full-OSD Menu Using the Remote Control With Source MaterialTuner at this time Step Five Configure SourcesInput Setup Menu Screen for DMP/The Bridge source Turning On the AVR Sleep TimerVolume Control OperationSource Selection HeadphonesMute Function Tone ControlsChannel Direct Inputs When you wish to view a DVD, simply select the DVD sourceAudio Input Selection Video Input SelectionChannel Input Selector Using the TunerRecording Using TheBridgeTMSelect a Surround Mode Remote Selecting a Surround ModeAudio Processing and Surround Sound Analog Audio SignalsDigital Audio Signals Advanced FunctionsSurround Modes Dolby Surround Settings Default ModesProvides descriptions of all surround modes available on Passages to avoid disturbing others Panorama adjusts wraparound surround effect0 or Dolby Digital EX played asSurround Mode Description Incoming Bitstream or Signal Punch-Through Programming System SettingsAdvanced Remote Control Functions Dim FunctionPress the Power Off Button to program the Power Off command To program, or record a macro, follow these stepsTo program punch-through control while operating any device Processor Reset Resetting the RemoteMemory Troubleshooting Guide DTS AVR 146 Technical SpecificationsTable A3 Delay Setting Defaults Appendix Default settings, worksheets, remote product codesTable A1 Source Input Setting Defaults Table A2 Speaker/Channel Setting DefaultsTable A5 Speaker/Channel Settings Table A4 Source Input SettingsOff Volume Default Default Vol Set 25dB Table A6 Remote Control CodesTable A7 System Settings Feature Default Setting Your SettingTV VID3 Table A8 Remote Control Function ListTable A8 Remote Control Function ListAiwa Table A10 Table A9Table A12 Remote Control Product Codes DVD Table A11 Remote Control Product Codes CDTable A15 Remote Control Product Codes CBL Table A14 Remote Control Product Codes TapeTable A15 Table A16 Remote Control Product Codes
Related manuals
Manual 1 pages 4.96 Kb

AVR 146 specifications

The Harman-Kardon AVR 146 is a versatile audio-video receiver designed to elevate home entertainment experiences. A product of the renowned Harman-Kardon brand, this receiver combines advanced audio technologies, user-friendly features, and sleek design, making it a popular choice for audiophiles and casual listeners alike.

One of the standout characteristics of the AVR 146 is its power output. It delivers 50 watts per channel across seven channels, allowing it to easily drive a wide range of speakers while ensuring that dynamic soundscapes are reproduced with clarity and depth. This capability makes it suitable for both movies and music, enhancing the overall auditory experience in home theater setups.

The AVR 146 supports high-definition audio formats, including Dolby TrueHD and DTS-HD Master Audio. These formats provide lossless sound quality, allowing listeners to appreciate every nuance of their favorite films and albums. The receiver's support for a 7.1 channel layout enriches movie nights with a surround sound experience, drawing viewers deeper into the action.

Connectivity is another key feature of the AVR 146. It is equipped with multiple HDMI inputs, allowing users to connect several high-definition devices such as Blu-ray players, gaming consoles, and streaming devices. This ensures that users can enjoy high-quality audio and video without the need for constant plug-and-play. Additionally, the receiver features an array of analog and digital inputs, which further broaden its compatibility with various devices.

Setup and operation are simplified by the inclusion of the user-friendly on-screen graphical interface. This intuitive design makes it easy to navigate through the various settings and features, allowing users to customize their audio preferences with ease. The AVR 146 also incorporates the Harman Kardon Quick Select feature, which allows users to save their favorite settings for different sources for quick access.

In terms of design, the Harman-Kardon AVR 146 showcases a modern and elegant appearance synonymous with the brand's aesthetic. It features a sleek front panel with an easy-to-read display and well-organized buttons, blending seamlessly into home environments.

In summary, the Harman-Kardon AVR 146 is a well-rounded audio-video receiver that promises exceptional performance and versatility. With its combination of powerful amplification, support for advanced audio formats, extensive connectivity options, and a user-friendly interface, it is an excellent choice for anyone looking to enhance their home entertainment system. Whether for movie enthusiasts or music lovers, the AVR 146 delivers an auditory experience that impresses and satisfies.
Top Page Image Contents