Harman-Kardon owner manual AVR 146 Technical Specifications, Dts

Page 49

AVR 146 TECHNICAL SPECIFICATIONS

Audio Section

Stereo Mode

Continuous Average Power (FTC)

40 Watts per channel, 20Hz–20kHz,

@ <0.07% THD, both channels driven into 8 ohms

Five-Channel Surround Modes

Power per Individual Channel

Front L&R channels:

30 Watts per channel

@ <0.07% THD, 20Hz–20kHz into 8 ohms

Center channel:

30 Watts @ <0.07% THD, 20Hz–20kHz into 8 ohms

Surround (L & R Side) channels:

30 Watts per channel

@ <0.07% THD, 20Hz–20kHz into 8 ohms

Input Sensitivity/Impedance

 

Linear (High-Level)

200mV/47k ohms

Signal-to-Noise Ratio (IHF-A)

100dB

Surround System Adjacent Channel Separation

Pro Logic I/II

40dB

Dolby Digital (AC-3)

55dB

DTS

55dB

Frequency Response

 

@ 1W (+0dB, –3dB)

10Hz – 130kHz

High Instantaneous

 

Current Capability (HCC)

±25 Amps

Transient Intermodulation

 

Distortion (TIM)

Unmeasurable

Slew Rate

40V/µsec

FM Tuner Section

 

Frequency Range

87.5 –108.0MHz

Usable Sensitivity

IHF 1.3µV/13.2dBf

Signal-to-Noise Ratio

Mono/Stereo 70/68dB

Distortion

Mono/Stereo 0.2/0.3%

Stereo Separation

40dB @ 1kHz

Selectivity

±400kHz, 70dB

Image Rejection

80dB

IF Rejection

90dB

The AVR 146 is Simplay HD-verified for compatibility via the HDMI connection with other Simplay HD-verified products.

AM Tuner Section

 

 

Frequency Range

520–1720kHz

 

Signal-to-Noise Ratio

45dB

 

Usable Sensitivity

Loop 500µV

 

Distortion

1kHz, 50% Mod 0.8%

 

Selectivity

±10kHz, 30dB

 

Video Section

 

 

Television Format

NTSC

 

Input Level/Impedance

1Vp-p/75 ohms

 

Output Level/Impedance

1Vp-p/75 ohms

 

Video Frequency Response

 

 

(Composite and S-Video)

10Hz–8MHz (–3dB)

 

Video Frequency Response

 

 

(Component Video)

10Hz–100MHz (–3dB)

 

HDMI

Switching

 

General

 

 

Power Requirement

AC 120V/60Hz

 

Power Consumption

65W idle, 540W maximum

 

 

(5 channels driven)

 

Dimensions

(Product)

(Shipping)

Width

17-5/16 inches (440mm)

22 inches (559mm)

Height

6-1/2 inches (165mm)

10-1/2 inches (267mm)

Depth

15 inches (382mm)

18-3/4 inches (476mm)

 

(Product)

(Shipping)

Weight

21.1 lb (9.6kg)

26.0 lb (11.8kg)

Depth measurement includes knobs, buttons and terminal connections.

Height measurement includes feet and chassis.

All features and specifications are subject to change without notice.

Harman Kardon and Logic 7 are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. Designed to Entertain and TheBridgeTM are trademarks of Harman International Industries, Incorporated.

Dolby, Pro Logic and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license from Dolby Laboratories.

“DTS” and “DTSIES Neo:6” are registered trademarks of DTS, Inc. “96/24” is a trademark of DTS, Inc.

Cirrus Logic is a registered trademark of Cirrus Logic, Inc.

SACD is a trademark of Sony Corporation.

Apple, iTunes and iPod are trademarks of Apple Computer, Inc., registered in the U.S. and other countries. Shuffle is a trademark of Apple Computer, Inc.

Blu-ray Disc is a trademark of the Blu-ray Disc Association.

HD-DVD is a trademark of the DVD Format/Logo Licensing Corporation (DVD FLLC).

TiVo is a registered trademark of TiVo Inc.

The Simplay HD logo and the Simplay, Simplay HD and Simplay Labs trademarks are owned by Silicon Image, Inc. and are used under license from Silicon Image, Inc. and/or Simplay Labs, LLC.

Please register your AVR 146 on our Web site at www.harmankardon.com. Note: You’ll need the product’s serial number. At the same time, you can choose to be notified about our new products and/or special promotions.

49

Image 49
Contents AVR Outdoor Antenna Grounding. If an outside antenna Safety InformationImportant Safety Information Staple Invoice Here Table of Contents Thank you for choosing Harman Kardon IntroductionAudio Section Surround ModesAudio Inputs Supplied AccessoriesAudio/Video Inputs With S-Video Digital Audio InputsFRONT-PANEL Controls Input Indicators REAR-PANEL Connections FM Antenna Inputs Video ComponentOutputs Input VideoChannel Input Selector Press this button to select Remote Control FunctionsBridge/DMP Controls an iPod docked in The Bridge AVR Selector Power OnRemote Control Functions Surround Modes Introduction to Home TheaterTypical Home Theater System Multichannel AudioConnections Connecting Source Devices to the AVRSpeaker Connections SubwooferDigital Audio Audio ConnectionsVideo Connections Analog AudioAntennas FM antenna uses a 75-ohm F-connector. See FigureAnalog Video Is colored red. See FigureSpeaker Placement Step One Connect the Speakers InstallationStep Two Connect the Subwoofer Step Three Connect the AntennasAudio Connections Video Connections Device TypeTiVo or other Or Video 1 Composite Video Input Coax digital output Component video connections at allVideo 2 Source Video 1 SourceVideo 3 Source Hdmi 1 Source Step Five Connect the Video DisplayHdmi 2 Source No video connections are neededStep Seven Insert Batteries in Remote Step Six Plug in AC PowerEnter a code from above Turn on your source deviceVideo Cable, Satellite Cable/SatelliteTwo steps are required the first time you turn on the AVR Step Nine Turn On the AVRUsing the On-Screen Menu System Initial SetupStep One Determine Speaker Size Step Two Measure Speaker Distances Step Three Manual Setup MenuSpeaker Size Menu Speaker Crossover Menu Is not present, such as when a DVD is pausedStep Four Output Level Calibration Delay Adjust MenuSee Figure Using the Full-OSD Menu Using the Remote Control With Source MaterialTuner at this time Step Five Configure SourcesInput Setup Menu Screen for DMP/The Bridge source Volume Control Sleep TimerOperation Turning On the AVRMute Function HeadphonesTone Controls Source SelectionAudio Input Selection When you wish to view a DVD, simply select the DVD sourceVideo Input Selection Channel Direct InputsChannel Input Selector Using the TunerRecording Using TheBridgeTMSelect a Surround Mode Remote Selecting a Surround ModeDigital Audio Signals Analog Audio SignalsAdvanced Functions Audio Processing and Surround SoundSurround Modes Default Modes Dolby Surround SettingsProvides descriptions of all surround modes available on 0 or Panorama adjusts wraparound surround effectDolby Digital EX played as Passages to avoid disturbing othersSurround Mode Description Incoming Bitstream or Signal Advanced Remote Control Functions System SettingsDim Function Punch-Through ProgrammingTo program, or record a macro, follow these steps Press the Power Off Button to program the Power Off commandTo program punch-through control while operating any device Resetting the Remote Processor ResetMemory Troubleshooting Guide DTS AVR 146 Technical SpecificationsTable A1 Source Input Setting Defaults Appendix Default settings, worksheets, remote product codesTable A2 Speaker/Channel Setting Defaults Table A3 Delay Setting DefaultsTable A5 Speaker/Channel Settings Table A4 Source Input SettingsTable A7 System Settings Table A6 Remote Control CodesFeature Default Setting Your Setting Off Volume Default Default Vol Set 25dBTV VID3 Table A8 Remote Control Function ListTable A8 Remote Control Function ListAiwa Table A10 Table A9Table A12 Remote Control Product Codes DVD Table A11 Remote Control Product Codes CDTable A15 Remote Control Product Codes CBL Table A14 Remote Control Product Codes TapeTable A15 Table A16 Remote Control Product Codes
Related manuals
Manual 1 pages 4.96 Kb

AVR 146 specifications

The Harman-Kardon AVR 146 is a versatile audio-video receiver designed to elevate home entertainment experiences. A product of the renowned Harman-Kardon brand, this receiver combines advanced audio technologies, user-friendly features, and sleek design, making it a popular choice for audiophiles and casual listeners alike.

One of the standout characteristics of the AVR 146 is its power output. It delivers 50 watts per channel across seven channels, allowing it to easily drive a wide range of speakers while ensuring that dynamic soundscapes are reproduced with clarity and depth. This capability makes it suitable for both movies and music, enhancing the overall auditory experience in home theater setups.

The AVR 146 supports high-definition audio formats, including Dolby TrueHD and DTS-HD Master Audio. These formats provide lossless sound quality, allowing listeners to appreciate every nuance of their favorite films and albums. The receiver's support for a 7.1 channel layout enriches movie nights with a surround sound experience, drawing viewers deeper into the action.

Connectivity is another key feature of the AVR 146. It is equipped with multiple HDMI inputs, allowing users to connect several high-definition devices such as Blu-ray players, gaming consoles, and streaming devices. This ensures that users can enjoy high-quality audio and video without the need for constant plug-and-play. Additionally, the receiver features an array of analog and digital inputs, which further broaden its compatibility with various devices.

Setup and operation are simplified by the inclusion of the user-friendly on-screen graphical interface. This intuitive design makes it easy to navigate through the various settings and features, allowing users to customize their audio preferences with ease. The AVR 146 also incorporates the Harman Kardon Quick Select feature, which allows users to save their favorite settings for different sources for quick access.

In terms of design, the Harman-Kardon AVR 146 showcases a modern and elegant appearance synonymous with the brand's aesthetic. It features a sleek front panel with an easy-to-read display and well-organized buttons, blending seamlessly into home environments.

In summary, the Harman-Kardon AVR 146 is a well-rounded audio-video receiver that promises exceptional performance and versatility. With its combination of powerful amplification, support for advanced audio formats, extensive connectivity options, and a user-friendly interface, it is an excellent choice for anyone looking to enhance their home entertainment system. Whether for movie enthusiasts or music lovers, the AVR 146 delivers an auditory experience that impresses and satisfies.