Harman-Kardon AVR 146 owner manual Input Setup Menu Screen for DMP/The Bridge source

Page 33

AUTO POLL: The Auto Poll feature is used when both an analog audio and digital audio connection have been made for one source device. If for some reason no digital signal is available, the AVR 146 will switch to the analog inputs for the source. This situation can occur with some cable or satellite television broadcasts, where some channels are broadcast with digital audio and others with analog audio.

For some sources, the Auto Poll feature is unnecessary and may be undesirable. For example, if your DVD player is stopped, you may not want to use the analog audio signal or you may have decided not to connect analog audio. Move the cursor to this line, and press the ‹/› Buttons until OFF appears, disabling the Auto Poll feature. With Auto Poll turned off, the receiver will only check for a signal at the audio input assigned to the source.

DMP SETTING: If you select DMP/The Bridge as your source input, you will notice that the AUDIO IN line of the INPUT SETUP menu has been replaced by the option GO TO DMP SETTING. See Figure 48.

Figure 48 – Input Setup Menu Screen for DMP/The Bridge source

Since The Bridge is connected to the AVR using a dedicated audio connection, it isn’t possible to select a different audio input for this source. However, there are several special settings used only with The Bridge. Selecting GO TO DMP SETTING displays the DMP SETTING menu (see Figure 49).

Figure 49 – DMP Setting Menu Screen

MODE: The first line of the DMP SETTING menu allows you to select whether the iPod will be used to listen to music (or other audio materials), or view a video or still image, if your iPod is video- or photo-capable.

INITIAL SETUP

REPEAT: Set REPEAT to ONE, ALL or OFF to repeat one track, all tracks in an album or playlist, or not to repeat any tracks.

SHUFFLE: Set SHUFFLE to SONGS to play all songs on the iPod in random order. The ALBUMS setting plays all albums in random order, with each album’s tracks played in album order.

RESUME: Set RESUME to ON to resume playback of a track from the point where it was interrupted by turning off the AVR, switching sources on the AVR, or removing the iPod from The Bridge. Set RESUME to OFF if you wish to restart play from the beginning of the track after interruptions.

NOTE: The Resume setting disables the Remember Playback Position setting that you may set for audio and video files using later versions of iTunes. Resume affects all files on the iPod until you manually change the setting either in the DMP SETTING menu or by using iTunes.

CHARGE IN ST-BY: Your iPod’s battery may be charged while it is docked in The Bridge with the AVR turned on. Set CHARGE IN ST-BY to ON to enable charging even when the AVR is in Standby mode (but not completely off). When CHARGE IN ST-BY is set to OFF, the iPod will charge only when the AVR is turned on.

NOTE: In order to access the DMP SETTING menu, press the AVR Selector on the remote so that it operates the AVR 146. You may then press the OSD Button and use the Navigation and Set Buttons, as usual, with the on-screen menu system. When you are ready to return to operation of your iPod using the remote, remember to press the DMP/The Bridge Selector so that the transport and other controls operate The Bridge.

To simplify use, you may wish to program two macros on your remote, one to select the AVR and issue the commands within the OSD system to display the DMP SETTING menu, and a second macro to remove the menu from the display and return the remote to operation of The Bridge. See the Macros section of the Advanced Functions section of the manual for more information on programming macros.

The remaining lines in the Input Setup menu activate the tone controls, and may be skipped at this time. We recommend leaving the tone controls at their factory defaults for most listening, in order to enjoy the sound mix created by your favorite movie and music artists. However, if your room or speakers have unusual characteristics, or simply as

a matter of personal preference, see the Tone Controls section on page 35 for more information.

You are now ready to begin enjoying your new receiver!

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents AVR Outdoor Antenna Grounding. If an outside antenna Safety InformationImportant Safety Information Staple Invoice Here Table of Contents Thank you for choosing Harman Kardon IntroductionAudio Section Surround ModesAudio Inputs Supplied AccessoriesAudio/Video Inputs With S-Video Digital Audio InputsFRONT-PANEL Controls Input Indicators REAR-PANEL Connections FM Antenna Inputs Video ComponentOutputs Input VideoRemote Control Functions Channel Input Selector Press this button to selectBridge/DMP Controls an iPod docked in The Bridge AVR Selector Power OnRemote Control Functions Surround Modes Introduction to Home TheaterTypical Home Theater System Multichannel AudioConnections Connecting Source Devices to the AVRSpeaker Connections SubwooferDigital Audio Audio ConnectionsVideo Connections Analog AudioAntennas FM antenna uses a 75-ohm F-connector. See FigureAnalog Video Is colored red. See FigureSpeaker Placement Step One Connect the Speakers InstallationStep Two Connect the Subwoofer Step Three Connect the AntennasAudio Connections Video Connections Device TypeTiVo or other Or Video 1 Composite Video Input Coax digital output Component video connections at allVideo 1 Source Video 2 SourceVideo 3 Source Hdmi 1 Source Step Five Connect the Video DisplayHdmi 2 Source No video connections are neededStep Seven Insert Batteries in Remote Step Six Plug in AC PowerEnter a code from above Turn on your source deviceVideo Cable, Satellite Cable/SatelliteTwo steps are required the first time you turn on the AVR Step Nine Turn On the AVRInitial Setup Using the On-Screen Menu SystemStep One Determine Speaker Size Step Three Manual Setup Menu Step Two Measure Speaker DistancesSpeaker Size Menu Speaker Crossover Menu Is not present, such as when a DVD is pausedDelay Adjust Menu Step Four Output Level CalibrationSee Figure Using the Full-OSD Menu Using the Remote Control With Source MaterialTuner at this time Step Five Configure SourcesInput Setup Menu Screen for DMP/The Bridge source Volume Control Sleep TimerOperation Turning On the AVRMute Function HeadphonesTone Controls Source SelectionAudio Input Selection When you wish to view a DVD, simply select the DVD sourceVideo Input Selection Channel Direct InputsChannel Input Selector Using the TunerRecording Using TheBridgeTMSelect a Surround Mode Remote Selecting a Surround ModeDigital Audio Signals Analog Audio SignalsAdvanced Functions Audio Processing and Surround SoundSurround Modes Dolby Surround Settings Default ModesProvides descriptions of all surround modes available on 0 or Panorama adjusts wraparound surround effectDolby Digital EX played as Passages to avoid disturbing othersSurround Mode Description Incoming Bitstream or Signal Advanced Remote Control Functions System SettingsDim Function Punch-Through ProgrammingPress the Power Off Button to program the Power Off command To program, or record a macro, follow these stepsTo program punch-through control while operating any device Processor Reset Resetting the RemoteMemory Troubleshooting Guide DTS AVR 146 Technical SpecificationsTable A1 Source Input Setting Defaults Appendix Default settings, worksheets, remote product codesTable A2 Speaker/Channel Setting Defaults Table A3 Delay Setting DefaultsTable A5 Speaker/Channel Settings Table A4 Source Input SettingsTable A7 System Settings Table A6 Remote Control CodesFeature Default Setting Your Setting Off Volume Default Default Vol Set 25dBTV VID3 Table A8 Remote Control Function ListTable A8 Remote Control Function ListAiwa Table A10 Table A9Table A12 Remote Control Product Codes DVD Table A11 Remote Control Product Codes CDTable A15 Remote Control Product Codes CBL Table A14 Remote Control Product Codes TapeTable A15 Table A16 Remote Control Product Codes
Related manuals
Manual 1 pages 4.96 Kb

AVR 146 specifications

The Harman-Kardon AVR 146 is a versatile audio-video receiver designed to elevate home entertainment experiences. A product of the renowned Harman-Kardon brand, this receiver combines advanced audio technologies, user-friendly features, and sleek design, making it a popular choice for audiophiles and casual listeners alike.

One of the standout characteristics of the AVR 146 is its power output. It delivers 50 watts per channel across seven channels, allowing it to easily drive a wide range of speakers while ensuring that dynamic soundscapes are reproduced with clarity and depth. This capability makes it suitable for both movies and music, enhancing the overall auditory experience in home theater setups.

The AVR 146 supports high-definition audio formats, including Dolby TrueHD and DTS-HD Master Audio. These formats provide lossless sound quality, allowing listeners to appreciate every nuance of their favorite films and albums. The receiver's support for a 7.1 channel layout enriches movie nights with a surround sound experience, drawing viewers deeper into the action.

Connectivity is another key feature of the AVR 146. It is equipped with multiple HDMI inputs, allowing users to connect several high-definition devices such as Blu-ray players, gaming consoles, and streaming devices. This ensures that users can enjoy high-quality audio and video without the need for constant plug-and-play. Additionally, the receiver features an array of analog and digital inputs, which further broaden its compatibility with various devices.

Setup and operation are simplified by the inclusion of the user-friendly on-screen graphical interface. This intuitive design makes it easy to navigate through the various settings and features, allowing users to customize their audio preferences with ease. The AVR 146 also incorporates the Harman Kardon Quick Select feature, which allows users to save their favorite settings for different sources for quick access.

In terms of design, the Harman-Kardon AVR 146 showcases a modern and elegant appearance synonymous with the brand's aesthetic. It features a sleek front panel with an easy-to-read display and well-organized buttons, blending seamlessly into home environments.

In summary, the Harman-Kardon AVR 146 is a well-rounded audio-video receiver that promises exceptional performance and versatility. With its combination of powerful amplification, support for advanced audio formats, extensive connectivity options, and a user-friendly interface, it is an excellent choice for anyone looking to enhance their home entertainment system. Whether for movie enthusiasts or music lovers, the AVR 146 delivers an auditory experience that impresses and satisfies.
Top Page Image Contents