Harman-Kardon AVR 146 Step Five Connect the Video Display, Hdmi 1 Source, Hdmi 2 Source

Page 23

INSTALLATION

HDMI 1 Source

Tape

The HDMI 1 source is used with a device that is capable of outputting digital video through an HDMI connection, such as a DVD, HD-DVD or Blu-ray Disc player or HDTV tuner. The HDMI 1 source is not used with any of the 2-channel analog audio or video inputs on the AVR 146.

Since the AVR 146 is not capable of processing either the audio or video signal transmitted via the HDMI connection, you will need to connect the source’s coaxial digital audio output to the Coaxial 2 digital audio input on the AVR 146, or use the 6-channel inputs. See Figure 24. You will also need to make sure your video display is HDMI-capable, and for many source devices, the display must be HDCP-compliant (High-Bandwidth Digital Content Protection) in order to display copy-protected materials. The AVR 146 is Simplay HD-verified, for compatibility via the HDMI connection with other Simplay HD-verified products.

If your source or video display is equipped with a DVI (Digital Video Interface) input, you may use an HDMI-to-DVI adapter (not included).

The Tape source is used for audio-only recorders, such as a CDR, MiniDisc or cassette deck.

Referring to Table 2, connect your recorder to the Tape Analog Audio inputs and outputs, and to any available digital audio input (and the coax digital audio output). See Figure 27.

Figure 27 – Tape Audio Inputs and Outputs, and Digital Audio Inputs and Outputs

Remember to connect the output jacks on your recorder to the Tape or digital audio input jacks on the AVR, and the input jacks on your recorder to the Tape or coax digital audio output jack on the AVR.

No video connections are needed.

Figure 24 – HDMI and Coaxial 2 Inputs

HDMI 2 Source

The HDMI 2 source is used with a second device that is capable of outputting digital video through an HDMI connection, such as a DVD, HD-DVD or Blu-ray Disc player. The HDMI 2 source is not used with any of the 2-channel analog audio or video inputs on the AVR 146.

Since the AVR 146 is not capable of processing either the audio or video signal transmitted via the HDMI connection, you will need to connect the source’s optical digital audio output to the Optical 2 digital audio input on the AVR 146, or use the 6-channel inputs. See Figure 25. You will also need to make sure your video display is HDMI-capable, and for many source devices, the display must be HDCP-compliant (High-Bandwidth Digital Content Protection) in order to display copy-protected materials.

If your source or video display is equipped with a DVI (Digital Video Interface) input, you may use an HDMI-to-DVI adapter (not included).

Figure 25 – HDMI 2 and Optical 2 Inputs

CD

The CD source is used for a strictly audio device, such as a CD player.

Referring to Table 2, connect your CD player to the CD Analog Audio inputs and to any available digital audio input. See Figure 26.

Figure 26 – CD Audio Inputs and Digital Audio Inputs

No video connections are needed.

TheBridgeTM

With Harman Kardon’s optional The Bridge, you can play audio, video or still images stored on your iPod (not included), use your AVR 146 remote control to operate the iPod, and even charge the iPod while it’s docked in The Bridge.

Simply plug the proprietary cable from The Bridge into the special

The Bridge/DMP connector on the rear of the AVR 146. See Figure 28. Refer to the owner’s manual for The Bridge to select the appropriate insert to match your iPod.

Figure 28 – The Bridge/DMP Connector

Step Five – Connect the Video Display

Only video connections should be made between the receiver and your video display (TV), unless your TV is the source for your television programming (see Video 2 Source, above).

You will need to make a video connection for each type of video used for your sources. In addition, even if you didn’t use S-video or composite video for any of your sources, one of these video monitor connections is required to view the AVR 146’s on-screen menus and displays.

First, determine what types of video your display is capable of handling. Remember that HDMI is preferred, followed by component video, S-video and then composite video. Ideally, this guided you in selecting the video connections for your sources.

Next, note which types of video connections you used for your source devices. Make sure you didn’t use a better type of video connection for a source than your video display can handle. If so, you will need to disconnect the source and use a video connection that’s compatible with your display.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents AVR Outdoor Antenna Grounding. If an outside antenna Safety InformationImportant Safety Information Staple Invoice Here Table of Contents Surround Modes IntroductionThank you for choosing Harman Kardon Audio SectionDigital Audio Inputs Supplied AccessoriesAudio Inputs Audio/Video Inputs With S-VideoFRONT-PANEL Controls Input Indicators REAR-PANEL Connections Video Video ComponentFM Antenna Inputs Outputs InputBridge/DMP Controls an iPod docked in The Bridge Remote Control FunctionsChannel Input Selector Press this button to select AVR Selector Power OnRemote Control Functions Multichannel Audio Introduction to Home TheaterSurround Modes Typical Home Theater SystemSubwoofer Connecting Source Devices to the AVRConnections Speaker ConnectionsAnalog Audio Audio ConnectionsDigital Audio Video ConnectionsIs colored red. See Figure FM antenna uses a 75-ohm F-connector. See FigureAntennas Analog VideoSpeaker Placement Step Three Connect the Antennas InstallationStep One Connect the Speakers Step Two Connect the SubwooferCoax digital output Component video connections at all Device TypeAudio Connections Video Connections TiVo or other Or Video 1 Composite Video InputVideo 3 Source Video 1 SourceVideo 2 Source No video connections are needed Step Five Connect the Video DisplayHdmi 1 Source Hdmi 2 SourceStep Seven Insert Batteries in Remote Step Six Plug in AC PowerCable/Satellite Turn on your source deviceEnter a code from above Video Cable, SatelliteTwo steps are required the first time you turn on the AVR Step Nine Turn On the AVRStep One Determine Speaker Size Initial SetupUsing the On-Screen Menu System Speaker Size Menu Step Three Manual Setup MenuStep Two Measure Speaker Distances Speaker Crossover Menu Is not present, such as when a DVD is pausedSee Figure Delay Adjust MenuStep Four Output Level Calibration Using the Full-OSD Menu Using the Remote Control With Source MaterialTuner at this time Step Five Configure SourcesInput Setup Menu Screen for DMP/The Bridge source Turning On the AVR Sleep TimerVolume Control OperationSource Selection HeadphonesMute Function Tone ControlsChannel Direct Inputs When you wish to view a DVD, simply select the DVD sourceAudio Input Selection Video Input SelectionChannel Input Selector Using the TunerRecording Using TheBridgeTMSelect a Surround Mode Remote Selecting a Surround ModeAudio Processing and Surround Sound Analog Audio SignalsDigital Audio Signals Advanced FunctionsSurround Modes Provides descriptions of all surround modes available on Dolby Surround SettingsDefault Modes Passages to avoid disturbing others Panorama adjusts wraparound surround effect0 or Dolby Digital EX played asSurround Mode Description Incoming Bitstream or Signal Punch-Through Programming System SettingsAdvanced Remote Control Functions Dim FunctionTo program punch-through control while operating any device Press the Power Off Button to program the Power Off commandTo program, or record a macro, follow these steps Memory Processor ResetResetting the Remote Troubleshooting Guide DTS AVR 146 Technical SpecificationsTable A3 Delay Setting Defaults Appendix Default settings, worksheets, remote product codesTable A1 Source Input Setting Defaults Table A2 Speaker/Channel Setting DefaultsTable A5 Speaker/Channel Settings Table A4 Source Input SettingsOff Volume Default Default Vol Set 25dB Table A6 Remote Control CodesTable A7 System Settings Feature Default Setting Your SettingTV VID3 Table A8 Remote Control Function ListTable A8 Remote Control Function ListAiwa Table A10 Table A9Table A12 Remote Control Product Codes DVD Table A11 Remote Control Product Codes CDTable A15 Remote Control Product Codes CBL Table A14 Remote Control Product Codes TapeTable A15 Table A16 Remote Control Product Codes
Related manuals
Manual 1 pages 4.96 Kb

AVR 146 specifications

The Harman-Kardon AVR 146 is a versatile audio-video receiver designed to elevate home entertainment experiences. A product of the renowned Harman-Kardon brand, this receiver combines advanced audio technologies, user-friendly features, and sleek design, making it a popular choice for audiophiles and casual listeners alike.

One of the standout characteristics of the AVR 146 is its power output. It delivers 50 watts per channel across seven channels, allowing it to easily drive a wide range of speakers while ensuring that dynamic soundscapes are reproduced with clarity and depth. This capability makes it suitable for both movies and music, enhancing the overall auditory experience in home theater setups.

The AVR 146 supports high-definition audio formats, including Dolby TrueHD and DTS-HD Master Audio. These formats provide lossless sound quality, allowing listeners to appreciate every nuance of their favorite films and albums. The receiver's support for a 7.1 channel layout enriches movie nights with a surround sound experience, drawing viewers deeper into the action.

Connectivity is another key feature of the AVR 146. It is equipped with multiple HDMI inputs, allowing users to connect several high-definition devices such as Blu-ray players, gaming consoles, and streaming devices. This ensures that users can enjoy high-quality audio and video without the need for constant plug-and-play. Additionally, the receiver features an array of analog and digital inputs, which further broaden its compatibility with various devices.

Setup and operation are simplified by the inclusion of the user-friendly on-screen graphical interface. This intuitive design makes it easy to navigate through the various settings and features, allowing users to customize their audio preferences with ease. The AVR 146 also incorporates the Harman Kardon Quick Select feature, which allows users to save their favorite settings for different sources for quick access.

In terms of design, the Harman-Kardon AVR 146 showcases a modern and elegant appearance synonymous with the brand's aesthetic. It features a sleek front panel with an easy-to-read display and well-organized buttons, blending seamlessly into home environments.

In summary, the Harman-Kardon AVR 146 is a well-rounded audio-video receiver that promises exceptional performance and versatility. With its combination of powerful amplification, support for advanced audio formats, extensive connectivity options, and a user-friendly interface, it is an excellent choice for anyone looking to enhance their home entertainment system. Whether for movie enthusiasts or music lovers, the AVR 146 delivers an auditory experience that impresses and satisfies.
Top Page Image Contents