Brother LX2500 Drawing up the lower, Pull on the upper thread to draw up the lower thread

———————

8Putneedle.the thread behind the guide above the

•The thread can easily be passed behind the needle bar thread guide by holding the thread in your left hand, then feeding the thread with your right hand.

1

1Needle bar thread guide

9Thread the needle from front to back leaving a thread tail of about 5 cm (2 inches).

1

1 5 cm (2 inches)

Note

●Make sure you raise the presser foot lever and the thread take-up lever before you feed the upper thread.

●If you incorrectly feed the thread you may cause sewing problems.

Drawing up the lower

thread 1

1While lightly holding the end of the upper thread, slowly turn the handwheel toward you (counterclockwise) by hand to lower and then raise the needle.

2Pull on the upper thread to draw up the lower thread.

1

2

1

2

1Upper thread

2 Lower thread

3Pull out about 10 cm (4 inches) of both threads and put them toward the back of the machine under the presser foot.

1

2

1Upper thread

2 Lower thread

16