CHECK LIST OF STEP-BY-STEP GUIDES TO
INSTALL
Review the following list to ensure you have completed all the installation procedures.
1. | Check the incoming | water. Has incoming water | |||
| been | tested? |
|
|
|
2. | Remove cardboard | packaging from salt tank. | |||
3. | Is the | incoming water going | to the valve inlet? | ||
4. | Is the | bypass | valve | placed | into the service |
| position? |
|
|
| |
5. | Is the ground | clamp | installed? | ||
6. | Are the drain lines clamped and secured? | ||||
7. | Is the | unit plugged | into a continuously live outlet? |
F"Water Supply
Valve Inlet
Bypass Valve(s)
Single By-
pass Valve
Note: Stem may be installed in either direction, The end with writ-
ing should be pulled out for service
8. | Has | salt been added to the | salt tank? |
9. | Has | the unit been sanitized? | See page 20. |
FOR SERVICE
position,
Outlet
Valve
Bypass Valve
Inlet
Close bypass valve. Open inlet & outlet valves.
Valve
FIG. 30
Questions? Call The Kenmore Water Line 1-800-426-9345
22