Conair UGE014/0999, Water/Spray Tanks manual What is, Tank?

Page 10

WHAT IS THE

WT OR ST

TANK?

Conair Water and Spray Tanks are designed to provide addi- tional spray or flood cooling of extruded profiles, tubing and pipe, or as a primary spray or cooling tank. Leveling floor jacks and adjustment handwheels at both ends of the tank ensure proper alignment with the extrusion line.

After an extrusion has been sized and solidified, it may require additional controlled cooling to obtain the desired characteristics.

The WT water tank provides flood cooling. You can sub- merge the extrusion in heated water to slow the cooling rate, or in cool water to cool it more quickly. The internal plumbing configuration for flood cooling is designed to provide maxi- mum turbulence to break up the temperature strata that forms around the extrusion for optimum heat transfer. Support and hold-down rollers keep the buoyant extrusion in place as it passes through the tank.

The ST spray tank reduces the buoyancy of the extrusion in the water and provides maximum heat transfer through evapo- ration by spraying water onto the hot extrusion surface. The extrusion can be held above the water level or submerged in the water in the spray compartment.

Both WT and ST tanks have two compartments: a long water or spray compartment for controlled cooling of the extrusion, and a short air-wipe compartment for removing water from the pipe surface as it leaves the water or spray compartment.

The water and spray compartments are sealed by gaskets on each end. Black wiping gaskets backed up by red support gaskets retain the flood and spray water.

An optional closed water recirculation reservoir, pump and heat exchanger can interface with your portable chiller or cen- tral chiller for reduced water consumption.

2-2

DESCRIPTION

Water Spray Tanks

UGE014/0999

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Page Date Manual Number UGE014/0999 Serial numbers Model numbers Table of Contents IntroductionPage Introduction HOW Guide is Organized Purpose User GuideYour Responsibility AS a User Read this SO no ONE Gets Hurt Page Description What is TANK?HOW IT Works Specifications Tank StyleFeatures OptionsFeatures and Options CON Closed Water Recirculation System Option Features and Options CON Installation Unpacking the Boxes Preparing for Installation Make sure the installation area providesAligning the Tank Position the tank downstream of the extruderConnecting Main Power Connecting Water AIR Supplies Connecting a ChillerTesting the Installation Page Operation Operation Determine the cooling mode you will usePreparing for Make sure the extruder and puller are readyPreparing for Operation Thread the extrudate through the tankStopping StartingStart the other equipment in the extrusion line Maintenance Preventative Maintenance Schedule Weekly, or as often as neededReplacing Gaskets Cleaning Tank Spray BarsLubricating Tank Components Inspect the exterior power cords. Carefully Open the electrical enclosure. a safety deviceInspect the wires and connections. Look for Checking Electrical ConnectionsTroubleshooting Before Beginning FEW WordsProduct Quality Problems Possible cause SolutionPage WE’RE Here to Help From outside the United States, callEquipment Guarantee Performance Warranty Warranty Limitations

Water/Spray Tanks, UGE014/0999 specifications

The Conair UGE014/0999 is a highly efficient water and spray tank system designed for various industrial applications, particularly in the realm of plastics processing and manufacturing. This solution stands out for its advanced features, robust construction, and user-friendly operation, making it a valuable asset for any plant seeking to enhance productivity and ensure the quality of its output.

One of the primary features of the Conair UGE014/0999 is its sizable tank capacity. Designed to hold substantial volumes of water, it enables continuous operation without the need for frequent refilling. This characteristic is especially advantageous in processes that require sustained cooling or moisture application, such as in cooling hot molds or maintaining optimal conditions for plastic products.

In terms of technologies, the Conair UGE014/0999 incorporates state-of-the-art pumping and spraying mechanisms that provide reliable and consistent performance. The system is outfitted with precision-engineered pumps capable of delivering uniform spray patterns, ensuring that the application of water is even and effective. This enhances the quality of the finished products while minimizing waste.

Another significant characteristic of the UGE014/0999 is its robust construction. Made from high-quality materials, this water and spray tank is designed to withstand the rigors of industrial environments. Its corrosion-resistant design not only extends its lifespan but also requires less maintenance, making it a cost-effective solution for manufacturers.

The ease of operation is another highlight of the Conair UGE014/0999. The tank is designed with user-friendly controls, allowing operators to easily adjust settings according to specific processing requirements. This flexibility ensures that the system can be tailored to meet the demands of varying production scenarios, thus increasing efficiency.

Furthermore, safety is a paramount consideration in the design of the Conair UGE014/0999. It features built-in safety mechanisms to prevent leaks and spills, protecting both the equipment and the working environment. This focus on safety is essential in any industrial setting, where the potential for accidents can have serious implications.

In conclusion, the Conair UGE014/0999 water and spray tank represents a perfect blend of advanced technology, robust construction, and user-friendly design. With its large capacity, efficient spraying capabilities, and safety features, it stands as a reliable choice for industries needing effective moisture management in their processes, ultimately contributing to enhanced production quality and efficiency.
Top Page Image Contents