Conair UGE014/0999, Water/Spray Tanks manual Unpacking the Boxes

Page 18

UNPACKING THE BOXES

!CAUTION: Exercise caution when moving the WT/ST tank. The tank may be lifted with a fork- lift or hoist and straps that have been positioned at the tank’s center of gravity.

The WT/ST tank comes fully assembled in a single crate.

1

 

Carefully uncrate the tank and its components.

 

 

Remove all packing material, protective paper, tape,

2

 

 

and plastic. Compare contents to the shipping papers to

 

 

ensure that you have all the parts.

 

 

Carefully inspect all components to make sure no

3

 

 

 

damage occurred during shipping. Check all wire terminal

 

 

connections, bolts, and any other electrical connections,

 

 

which may have come loose during shipping. Immediately

 

 

report any damage or missing components to the freight

 

 

company that delivered the tank.

 

 

 

4

 

Take a moment to record serial numbers and

 

 

specifications in the blanks provided on the back of the

 

 

User Guide’s title page. The information will be helpful

 

 

if you ever need service or parts. The User Guide is in

 

 

a folder inside the tank.

 

 

You are now ready to begin installation.

5

 

 

 

Complete the preparation steps on the next page.

Installation Hardware Needed:

❒wire strain relief (for recirculation package only)

❒one plumb bob or laser bore sight

❒one hex key wrench

❒one flathead screwdriver

❒flexible hose with 1.5 inch NPT coupling

3-2

INSTALLATION

Water/Spray Tanks

UGE014/0999

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Page Date Manual Number UGE014/0999 Serial numbers Model numbers Table of Contents IntroductionPage Introduction Purpose User Guide HOW Guide is OrganizedYour Responsibility AS a User Read this SO no ONE Gets Hurt Page Description What is TANK?HOW IT Works Specifications Tank StyleFeatures OptionsFeatures and Options CON Closed Water Recirculation System Option Features and Options CON Installation Unpacking the Boxes Preparing for Installation Make sure the installation area providesAligning the Tank Position the tank downstream of the extruderConnecting Main Power Connecting Water AIR Supplies Connecting a ChillerTesting the Installation Page Operation Operation Determine the cooling mode you will usePreparing for Make sure the extruder and puller are readyPreparing for Operation Thread the extrudate through the tankStarting StoppingStart the other equipment in the extrusion line Maintenance Preventative Maintenance Schedule Weekly, or as often as neededCleaning Tank Spray Bars Replacing GasketsLubricating Tank Components Inspect the exterior power cords. Carefully Open the electrical enclosure. a safety deviceInspect the wires and connections. Look for Checking Electrical ConnectionsTroubleshooting Before Beginning FEW WordsProduct Quality Problems Possible cause SolutionPage WE’RE Here to Help From outside the United States, callEquipment Guarantee Performance Warranty Warranty Limitations

Water/Spray Tanks, UGE014/0999 specifications

The Conair UGE014/0999 is a highly efficient water and spray tank system designed for various industrial applications, particularly in the realm of plastics processing and manufacturing. This solution stands out for its advanced features, robust construction, and user-friendly operation, making it a valuable asset for any plant seeking to enhance productivity and ensure the quality of its output.

One of the primary features of the Conair UGE014/0999 is its sizable tank capacity. Designed to hold substantial volumes of water, it enables continuous operation without the need for frequent refilling. This characteristic is especially advantageous in processes that require sustained cooling or moisture application, such as in cooling hot molds or maintaining optimal conditions for plastic products.

In terms of technologies, the Conair UGE014/0999 incorporates state-of-the-art pumping and spraying mechanisms that provide reliable and consistent performance. The system is outfitted with precision-engineered pumps capable of delivering uniform spray patterns, ensuring that the application of water is even and effective. This enhances the quality of the finished products while minimizing waste.

Another significant characteristic of the UGE014/0999 is its robust construction. Made from high-quality materials, this water and spray tank is designed to withstand the rigors of industrial environments. Its corrosion-resistant design not only extends its lifespan but also requires less maintenance, making it a cost-effective solution for manufacturers.

The ease of operation is another highlight of the Conair UGE014/0999. The tank is designed with user-friendly controls, allowing operators to easily adjust settings according to specific processing requirements. This flexibility ensures that the system can be tailored to meet the demands of varying production scenarios, thus increasing efficiency.

Furthermore, safety is a paramount consideration in the design of the Conair UGE014/0999. It features built-in safety mechanisms to prevent leaks and spills, protecting both the equipment and the working environment. This focus on safety is essential in any industrial setting, where the potential for accidents can have serious implications.

In conclusion, the Conair UGE014/0999 water and spray tank represents a perfect blend of advanced technology, robust construction, and user-friendly design. With its large capacity, efficient spraying capabilities, and safety features, it stands as a reliable choice for industries needing effective moisture management in their processes, ultimately contributing to enhanced production quality and efficiency.
Top Page Image Contents