Conair Water/Spray Tanks, UGE014/0999 manual Testing the Installation

Page 23

1 Adjust the standpipe for the water level you want to maintain.

2 Turn water supply on and fill the tank.

◆Water fills the tank to the water level you set.

◆If you have a spray tank, water should enter the tank through the spray bars.

◆Excess water flows through the drain lines.

If you have the optional recirculation system:

1 Turn water pump on.

Press the REC START button.

◆The pump draws water through the heat exchanger and into the upper tank.

2 Check the pump for proper rotation. The pump rotation must match the direction indicated on the rotation sticker on top of the pump.

!WARNING: If a pump rotates in the wrong direction for more than a very short time, dam- age will occur.

If the pump rotation is incorrect, turn off the pump and disconnect power. Swap any two of the three power source wires on the terminal block in the electrical enclosure.

WARNING: Voltage Hazard

Always disconnect and lock out the main power sources before making electrical adjustments. Electrical adjustments should be made only by qualified personnel.

TESTING THE INSTALLATION

UGE014/0999

Water/Spray Tanks

INSTALLATION 3-7

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Page Date Manual Number UGE014/0999 Serial numbers Model numbers Introduction Table of ContentsPage Introduction Your Responsibility AS a User Purpose User GuideHOW Guide is Organized Read this SO no ONE Gets Hurt Page Description TANK? What isHOW IT Works Tank Style SpecificationsOptions FeaturesFeatures and Options CON Closed Water Recirculation System Option Features and Options CON Installation Unpacking the Boxes Make sure the installation area provides Preparing for InstallationPosition the tank downstream of the extruder Aligning the TankConnecting Main Power Connecting a Chiller Connecting Water AIR SuppliesTesting the Installation Page Operation Make sure the extruder and puller are ready Determine the cooling mode you will usePreparing for OperationThread the extrudate through the tank Preparing for OperationStart the other equipment in the extrusion line StartingStopping Maintenance Weekly, or as often as needed Preventative Maintenance ScheduleLubricating Tank Components Cleaning Tank Spray BarsReplacing Gaskets Checking Electrical Connections Open the electrical enclosure. a safety deviceInspect the wires and connections. Look for Inspect the exterior power cords. CarefullyTroubleshooting FEW Words Before BeginningPossible cause Solution Product Quality ProblemsPage From outside the United States, call WE’RE Here to HelpWarranty Limitations Equipment Guarantee Performance Warranty

Water/Spray Tanks, UGE014/0999 specifications

The Conair UGE014/0999 is a highly efficient water and spray tank system designed for various industrial applications, particularly in the realm of plastics processing and manufacturing. This solution stands out for its advanced features, robust construction, and user-friendly operation, making it a valuable asset for any plant seeking to enhance productivity and ensure the quality of its output.

One of the primary features of the Conair UGE014/0999 is its sizable tank capacity. Designed to hold substantial volumes of water, it enables continuous operation without the need for frequent refilling. This characteristic is especially advantageous in processes that require sustained cooling or moisture application, such as in cooling hot molds or maintaining optimal conditions for plastic products.

In terms of technologies, the Conair UGE014/0999 incorporates state-of-the-art pumping and spraying mechanisms that provide reliable and consistent performance. The system is outfitted with precision-engineered pumps capable of delivering uniform spray patterns, ensuring that the application of water is even and effective. This enhances the quality of the finished products while minimizing waste.

Another significant characteristic of the UGE014/0999 is its robust construction. Made from high-quality materials, this water and spray tank is designed to withstand the rigors of industrial environments. Its corrosion-resistant design not only extends its lifespan but also requires less maintenance, making it a cost-effective solution for manufacturers.

The ease of operation is another highlight of the Conair UGE014/0999. The tank is designed with user-friendly controls, allowing operators to easily adjust settings according to specific processing requirements. This flexibility ensures that the system can be tailored to meet the demands of varying production scenarios, thus increasing efficiency.

Furthermore, safety is a paramount consideration in the design of the Conair UGE014/0999. It features built-in safety mechanisms to prevent leaks and spills, protecting both the equipment and the working environment. This focus on safety is essential in any industrial setting, where the potential for accidents can have serious implications.

In conclusion, the Conair UGE014/0999 water and spray tank represents a perfect blend of advanced technology, robust construction, and user-friendly design. With its large capacity, efficient spraying capabilities, and safety features, it stands as a reliable choice for industries needing effective moisture management in their processes, ultimately contributing to enhanced production quality and efficiency.
Top Page Image Contents