Harman-Kardon 347 owner manual Multiroom Operation, Surround Amplifier Channel Assignment

Page 47

Multiroom Operation

Multiroom

The AVR is fully equipped to operate as the con- trol center for a complete multiroom system that is capable of sending one source to a second zone in the house while separate source is lis- tened to in the main room. In addition to provid- ing for control over the selection of the remote source and its volume, the AVR offers a com- prehensive range of options for powering the speakers in the second zone.

Using the line-levelMultiroom Audio Outputs ', the selected source may be fed to optional, external power amplifiers that may be matched to the specifics of the installation.

When the main room system is configured for 5.1 operation, the Surround Back Left/Right amplifier channels may be used to power the remote zone so that no additional amplifiers are required.

Using built-in A-BUS Ready technology, optional A-BUS modules may be connected to the AVR via a single Category Five wire, so that remote zone speakers may be powered directly from the module or keypad without the need for additional power, IR sensor or volume control wires to be run to the second zone.

In addition, the AVR includes a remote IR sensor input so that remote control commands from the Zone II remote included with the unit may be transmitted to the unit, while standard IR input/output jacks allow the remote zone’s com- mands to be sent to compatible IR-controlled source devices.

Installation

Although simple remote room systems may be installed by the average do-it-yourself hobbyist, the complexity of your multizone/multiroom sys- tem involves running wires inside of walls where the services of a specially trained installer may be required. Regardless of who does the work, please remember that local building codes may govern in-wall electrical work, including proper specification of any wiring used and the way in which it is connected. You are responsible for making certain that all Multiroom installation work is done properly and in compliance with all applicable codes and regulations.

For standard installations, follow the instructions shown on page 21 for the connection of speaker wire and IR remote wiring to the AVR.

For installations where the Surround Back Left/Right amplifier channels are used to power the remote zone, make certain that the system is configured for that type of operation, as shown on page 47.

For installations where A-BUS modules are used, follow the instructions provided with the A-BUS remote modules or keypads.

Additional information will also be made avail- able through the Harman Kardon Web Site at www.harmankardon.com.

Multiroom Setup

Once the audio and IR link connections have been made, the AVR needs to be configured for multiroom operation using the steps below. Press the OSD button L to bring the main menu (Figure 1) to the screen. Press the /¤ Button D until the Multiroom -tab on the left is highlighted in white. Press the Set button F to enter the MULTIROOM SETUP menu (Figure 30).

Figure 30

When the MULTIROOM SETUP menu appears, the blue cursor bar will be at the Multiroom line. Since this line is used to turn the system on and off, do not make an adjustment here unless you wish to turn the sys- tem on at this time. To turn the system on, press the Set Button F, followed by the button

so that ON is highlighted. If you do not wish to turn the system on at this time or to pro- ceed to the next step, press the ¤ Button D once so that the blue cursor bar is highlighting the Source line.

At the Source line, press the press the Set Button F, followed by the /buttons

Euntil the desired Audio/Video input to the multi-room system appears. When the selec- tion has been made, press the Set Button F to confirm your choice, and continue to the Default Volume line by pressing the

¤ Button D.

At the Default Volume line, press the Set Button F, followed by the / buttons

Eor hold them pressed until the desired volume level for the multi-room system is entered and press Set F to confirm your choice. DO NOT use the regular volume control knobs for this setting.

Surround Amplifier Channel Assignment

The AVR is equipped with seven full-power amplifier channels to allow for complete

7.1-channel operation without the need for additional external amplifiers. However, in some installations you may wish to use the traditional 5.1-channel configuration for the main listening room, which allows the surround back left/right amplifier channels to be used to power speakers placed in a remote zone location.

If you wish to use the Surround Back channel amplifiers to power the remote zone, you must change a setting in the MULTIROOM SETUP menu. To make that change, first call up the menu system by pressing the OSD Button L to bring the main menu (Figure 1) to the screen. Next, press the ¤ Button D until the Multiroom tab is highlighted in white. Press the Set Button F to enter the MULTIROOM SETUP menu.

To change the setting so that the Surround Back amplifiers are fed by the source selected through the Multiroom system, press the /¤ Button

Duntil the SB Amps line is highlighted in blue. Press the Set Button F, followed by the / buttons E so that MULTI is high- lighted in blue text and press the Set Button F.

Remember that once this setting is made you will not be able to take advantage of any of the 6.1/7.1- channel decoding or processing modes, and no Surround Back speakers must be selected in the speaker setup procedure outlined earlier. In addition the speakers used for the remote zone must be connected to the

Surround Back/Multiroom Speaker Outputs ￿. The volume for these speakers is set by the multiroom system, as explained on page 47 of this manual.

Multiroom Operation

When operating the AVR from a remote room location where an IR sensor link has been con- nected to the AVR’s rear panel Multiroom IR Input ), you may use either the Main remote control or the Zone II remote. To turn on the multiroom feed, press any of the Input Selector buttons on the Zone II.2 remote C or the Main remote 456. Press the AVR Selector 5 to turn the unit on to the last source, or any of the other Selector buttons to turn on to a specific source.

ENGLISH

MULTIROOM OPERATION 47

Image 47
Contents AVR 347 Audio/ Video Receiver Declaration of Conformity Table of ContentsIntroduction Description and FeaturesImportant Safety Information Safety InformationDo not place the unit directly on a carpeted surface Installation LocationCleaning UnpackingFront Panel Controls Headphone Jack $ Speaker/Channel Input IndicatorDigital Input Selector When playing a # Preset Stations Selector Press thisSee page 44 for more information on the Channel Indicators Rear Panel Connections Digital Audio Outputs Connect these Rear Panel Connections Main Remote Control Functions See page 46 for more information Main Remote Control Functions Main Remote Control Functions Changers Zone II.2 Remote Control FunctionsChange the input Zone II.2 Remote Control Functions Hdmi Input Connections Installation and ConnectionsAudio Equipment Connections Hdmi ConnectionsWith the AVR 347 turned off, connect Video Equipment ConnectionsVideo Video In/Out jacks, if it´s a recording VCR Scart A/V ConnectionsVideo Connection Notes Important Note for the Use SCART-Cinch Adapters Important Note for Adapter CablesImportant Notes for S-Video connections TV, see item belowAC Power Connections System and Power ConnectionsMain Room Remote Control Extension BUS Installation ConnectionsSpeaker Selection Speaker PlacementFirst Turn On System ConfigurationUsing the On-Screen Display System SetupInput Setup Video Optical Source InputCoax Surround Setup Night Mode Settings Stereo-Digital Mode Configuring the Surround Off Stereo ModesAutomated Speaker Setup Using EzSet/EQ Stereo-Direct Bypass ModeNavigation Buttons E to highlight System Configuration Speaker Size Setup Manual SetupCenter System Configuration Delay Settings Output Level Adjustment Main menu appears on the screen Up the Volume until you can hear the test noise clearlyWhen all channels have the same output level Is then pressed to select OFF in the highlighted videoOperation Surround Mode ChartMain speakers and a subwoofer Dolby 3 StereoReference WideVideo Input Selection Using the Sleep TimerBasic Operation Source SelectionChannel/8-Channel Direct Input Controls and Use of HeadphonesSurround Mode Selection Volume Up/Down ButtonsSelecting a Digital Source Digital Audio PlaybackDolby Digital PCM Audio PlaybackIncoming Bitstream Available Surround Modes Surround Mode TypesDigital Bitstream Indicators PCM Playback Indications Incoming Signal Available Surround ModesSee Figure Speaker/Channel IndicatorsNight Mode Menu Button UsingTape Recording Pressing the DMP Selector ButtonYou may then navigate the menus as explained above Output Level Adjustment With Source SignalsMemory Backup Normal output level adjustment forSurround Amplifier Channel Assignment Multiroom OperationMultiroom Remote room Or mute the output GFront-Panel-Display Fade Video AdjustmentsVideo Adjustments Advanced FeaturesFull-OSD Time Out Adjustment Advanced FeaturesTurn On Volume Level Semi-OSD SettingsBasic Tuner Operation Default Surround ModeRDS Display Options RDS TuningTuner Operation RDS OperationDirect Code Entry Programming the RemoteProgramming the Remote with Codes Code ReadoutPress the Input Selector 45 button Learning Codes from a RemoteErasing Learned Codes VID1/VCR VID3/TV VID2/CBL/SATPress the AVR Selector Erasing Macro CommandsMacro Programming Programmed Device FunctionsTransport Control Punch-Through Volume Punch-ThroughChannel Control Punch-Through Resetting the Remote Memory DVD Function ListAVR DVD Remote sensor Ú is obscured Troubleshooting GuideProcessor Reset Power Switch 1 is pushedTechnical Specifications Center Speaker Size VideoTable A4 Source Input Settings Harman Consumer Group, Inc

347 specifications

The Harman-Kardon 347 is a notable piece of audio equipment that combines advanced technological features with a user-friendly design to deliver high-quality sound. As a receiver, the Harman-Kardon 347 is engineered to cater to audiophiles who seek both performance and aesthetics in their home audio systems.

One of the standout features of the Harman-Kardon 347 is its powerful amplification capabilities. The receiver boasts a multi-channel design that allows it to deliver robust audio output, making it suitable for both music and home theater setups. Users can enjoy a well-balanced sound profile that ensures clarity across all frequencies, providing an immersive listening experience.

In terms of connectivity, the Harman-Kardon 347 is equipped with a plethora of input options. It supports various audio formats and allows for seamless integration with different devices, whether it be a CD player, Blu-ray player, or streaming device. The receiver includes multiple HDMI inputs, enabling high-definition video and audio transmission, which is essential for modern entertainment systems.

Another notable aspect of the Harman-Kardon 347 is its implementation of advanced audio technologies. It features Dolby Digital and DTS support, ensuring that users can experience surround sound as intended by content creators. This feature enhances the experience of watching movies or playing video games, allowing for a deeply immersive soundstage.

Moreover, the Harman-Kardon 347 has been designed with ease of use in mind. Its intuitive interface and remote control allow users to navigate through settings and inputs with minimal effort. The clear and organized layout makes it accessible for individuals who may not be as tech-savvy, ensuring that everyone can enjoy high-quality audio without a steep learning curve.

The build quality of the Harman-Kardon 347 also deserves mention. With its sleek and modern design, this receiver can seamlessly blend into any home decor. The attention to detail in its construction not only adds aesthetic appeal but also ensures durability, allowing users to enjoy this device for many years without concern.

In summary, the Harman-Kardon 347 stands out in the crowded market of audio receivers. With its robust amplification, multiple connectivity options, advanced audio technologies, user-friendly interface, and stylish design, it offers a comprehensive audio solution for both casual listeners and serious audiophiles alike. Whether for music enjoyment or enhancing the home theater experience, the Harman-Kardon 347 is well-equipped to meet and exceed expectations.