Harman-Kardon 347 owner manual Resetting the Remote Memory

Page 57

Programming the Remote

Resetting the Remote Memory

As you add components to your home-theater system, occasionally you may wish to totally reprogram the remote control without the confu- sion of any commands, macros or ”Punch- Through“ programming that you may have done. To do this, it is possible to reset the remote to the original factory defaults and command codes by following these steps. Note, however, that once the remote is reset, all commands or codes that you have entered will be erased and will need to be re-entered:

1.Press any of the Input Selector buttons 4 and the ”O“ button H at the same time until the Program Indicator 2 begins to flash amber.

2.Press the ”3“ button H three times.

3.The red LED under the Input Selector 4 will go out and the Program Indicator 2 will stop flashing and turn green.

4.The Program Indicator 2 will remain green until the remote is reset. Note that this may take a while, depending on how many commands are in the memory and need to be erased.

5.When the Program Indicator 2 goes out, the remote has been reset to the factory settings.

ENGLISH

PROGRAMMING THE REMOTE 57

Image 57
Contents AVR 347 Audio/ Video Receiver Declaration of Conformity Table of ContentsIntroduction Description and FeaturesImportant Safety Information Safety InformationCleaning Installation LocationUnpacking Do not place the unit directly on a carpeted surfaceFront Panel Controls Headphone Jack $ Speaker/Channel Input Indicator# Preset Stations Selector Press this See page 44 for more information on the Channel IndicatorsDigital Input Selector When playing a Rear Panel Connections Digital Audio Outputs Connect these Rear Panel Connections Main Remote Control Functions See page 46 for more information Main Remote Control Functions Main Remote Control Functions Zone II.2 Remote Control Functions Change the inputChangers Zone II.2 Remote Control Functions Audio Equipment Connections Installation and ConnectionsHdmi Connections Hdmi Input ConnectionsWith the AVR 347 turned off, connect Video Equipment ConnectionsScart A/V Connections Video Connection NotesVideo Video In/Out jacks, if it´s a recording VCR Important Notes for S-Video connections Important Note for Adapter CablesTV, see item below Important Note for the Use SCART-Cinch AdaptersMain Room Remote Control Extension System and Power ConnectionsBUS Installation Connections AC Power ConnectionsSpeaker Selection Speaker PlacementUsing the On-Screen Display System ConfigurationSystem Setup First Turn OnInput Setup Source Input CoaxVideo Optical Surround Setup Night Mode Settings Automated Speaker Setup Using EzSet/EQ Configuring the Surround Off Stereo ModesStereo-Direct Bypass Mode Stereo-Digital ModeNavigation Buttons E to highlight System Configuration Speaker Size Setup Manual SetupCenter System Configuration Delay Settings Output Level Adjustment When all channels have the same output level Up the Volume until you can hear the test noise clearlyIs then pressed to select OFF in the highlighted video Main menu appears on the screenOperation Surround Mode ChartReference Dolby 3 StereoWide Main speakers and a subwooferBasic Operation Using the Sleep TimerSource Selection Video Input SelectionSurround Mode Selection Controls and Use of HeadphonesVolume Up/Down Buttons Channel/8-Channel Direct InputDolby Digital Digital Audio PlaybackPCM Audio Playback Selecting a Digital SourceSurround Mode Types Digital Bitstream IndicatorsIncoming Bitstream Available Surround Modes PCM Playback Indications Incoming Signal Available Surround ModesSpeaker/Channel Indicators Night ModeSee Figure Tape Recording UsingPressing the DMP Selector Button Menu ButtonMemory Backup Output Level Adjustment With Source SignalsNormal output level adjustment for You may then navigate the menus as explained aboveMultiroom Operation MultiroomSurround Amplifier Channel Assignment Remote room Or mute the output GVideo Adjustments Video AdjustmentsAdvanced Features Front-Panel-Display FadeTurn On Volume Level Advanced FeaturesSemi-OSD Settings Full-OSD Time Out AdjustmentBasic Tuner Operation Default Surround ModeTuner Operation RDS TuningRDS Operation RDS Display OptionsProgramming the Remote with Codes Programming the RemoteCode Readout Direct Code EntryErasing Learned Codes Learning Codes from a RemoteVID1/VCR VID3/TV VID2/CBL/SAT Press the Input Selector 45 buttonMacro Programming Erasing Macro CommandsProgrammed Device Functions Press the AVR SelectorVolume Punch-Through Channel Control Punch-ThroughTransport Control Punch-Through Resetting the Remote Memory DVD Function ListAVR DVD Processor Reset Troubleshooting GuidePower Switch 1 is pushed Remote sensor Ú is obscuredTechnical Specifications Center Speaker Size VideoTable A4 Source Input Settings Harman Consumer Group, Inc

347 specifications

The Harman-Kardon 347 is a notable piece of audio equipment that combines advanced technological features with a user-friendly design to deliver high-quality sound. As a receiver, the Harman-Kardon 347 is engineered to cater to audiophiles who seek both performance and aesthetics in their home audio systems.

One of the standout features of the Harman-Kardon 347 is its powerful amplification capabilities. The receiver boasts a multi-channel design that allows it to deliver robust audio output, making it suitable for both music and home theater setups. Users can enjoy a well-balanced sound profile that ensures clarity across all frequencies, providing an immersive listening experience.

In terms of connectivity, the Harman-Kardon 347 is equipped with a plethora of input options. It supports various audio formats and allows for seamless integration with different devices, whether it be a CD player, Blu-ray player, or streaming device. The receiver includes multiple HDMI inputs, enabling high-definition video and audio transmission, which is essential for modern entertainment systems.

Another notable aspect of the Harman-Kardon 347 is its implementation of advanced audio technologies. It features Dolby Digital and DTS support, ensuring that users can experience surround sound as intended by content creators. This feature enhances the experience of watching movies or playing video games, allowing for a deeply immersive soundstage.

Moreover, the Harman-Kardon 347 has been designed with ease of use in mind. Its intuitive interface and remote control allow users to navigate through settings and inputs with minimal effort. The clear and organized layout makes it accessible for individuals who may not be as tech-savvy, ensuring that everyone can enjoy high-quality audio without a steep learning curve.

The build quality of the Harman-Kardon 347 also deserves mention. With its sleek and modern design, this receiver can seamlessly blend into any home decor. The attention to detail in its construction not only adds aesthetic appeal but also ensures durability, allowing users to enjoy this device for many years without concern.

In summary, the Harman-Kardon 347 stands out in the crowded market of audio receivers. With its robust amplification, multiple connectivity options, advanced audio technologies, user-friendly interface, and stylish design, it offers a comprehensive audio solution for both casual listeners and serious audiophiles alike. Whether for music enjoyment or enhancing the home theater experience, the Harman-Kardon 347 is well-equipped to meet and exceed expectations.