Harman-Kardon 347 Macro Programming, Programmed Device Functions, Press the AVR Selector

Page 55

Programming the Remote

Macro Programming

Macros enable you to easily repeat frequently used combinations of commands with the press of a single button on the AVR’s remote control. Once programmed, a macro will send out up to 19 different remote codes in a pre-determined sequential order enabling you to automate the process of turning on your system, changing devices, or other common tasks. The AVR’s remote can store up to five separate macro com- mand sequences, one that is associated with the Power On button 3, and four more that are

accessed by pressing the Macro buttons

.

1. To start programming a macro, press the

Mute button and the Macro button to be programmed or the Power-Onbutton

3at the same time. Note that the latest

selected Input Selector will light red, and the Program Indicator 2 will flash amber.

2.Enter the steps for the macro sequence by pressing the button for the actual command step. Although the macro may contain up to 19 steps, each button press, including those used to change devices, counts as a step. The Program Indicator 2 will flash green twice to confirm each button press as you enter commands.

NOTE: While entering commands for Power On of any device during a macro sequence, press the

Mute button . DO NOT press the Power ON button 3.

•Remember to press the appropriate Input Selector button 4 before functions are changed to another device. This is also needed for the AVR Selector button 5 itself, as long as it’s not lit red and AVR functions shall be programmed.

3.When all the steps have been entered, press the Sleep button 9 to enter the commands. The red light under the Input Selector

45will blink and then turn off and the Program Indicator 2 will flash green twice to confirm the macro to be programmed.

Example: To program the Macro 1 button so that it turns on the AVR, TV and a Sat-Receiver,

follow these steps:

and Mute

• Press the Macro 1 button

buttons at the same time and then release them.

•Note that the Program Indicator will flash amber.

•Press the AVR Selector 5.

•Press the Mute button to store the AVR’s power on command.

•Press the VID 2 Input Selector button 4 to indicate the next command is for “TV”.

•Press the Mute button to store the TV Power On Command.

•Press the VID 3 Input Selector button 4 to indicate the next command is for “Sat- Receiver”.

•Press the Mute button to store the Sat- Receiver Power On command.

•Press the Sleep/Channel Up button 9 to complete the process and store the macro sequence.

After following these steps, each time you press

the Macro 1 button , the remote will send all Power On commands.

Erasing Macro Commands

To remove the commands that have been pro- grammed into one of the Macro buttons, follow these steps:

1. Press the Mute button

and the Macro

button

that contains the commands you

wish to erase.

 

2.Note that the Program Indicator 2 will flash amber, and the red LED under the Input Selector 45 last used will turn on.

3.Within ten seconds, press the Surround Mode Selector/Channel Down button A.

4.The red LED under the Selector will go out, and the Program Indicator 2 will turn green and flash three times before it goes out.

5.When the Program Indicator 2 goes out, the Macro has been erased.

Programmed Device Functions

Once the AVR’s remote has been programmed for the codes of other devices, press the appropriate Input Selector 4 to change the remote from control over the AVR to the additional product.

When you press any of these buttons, it will briefly flash in red to indicate that you have changed the device being controlled.

When operating a device other than the AVR, the controls may not correspond exactly to the func- tion printed on the remote or button. Some com- mands, such as the volume control, are the same as they are with the AVR. Other buttons will change their function so that they correspond to a secondary label on the remote. For example, the Sleep and Surround mode selector buttons also function as the Channel Up and Channel Down buttons when operating most TV sets, VCRs or Sat-Receivers.

For some products, however, the function of a particular button does not follow the command printed on the remote. In order to see which function a button controls, consult the Function List tables printed on page 58-59. To use those tables, first check the type of device being controlled (e.g., TV, VCR). Next, look at the remote control diagram on page 58. Note that each button has a number on it.

To find out what function a particular button has for a specific device, find the button number on the Function List and then look in the column for the device you are controlling. For example, but- ton number 45 is the”Direct” button for the AVR, but it is the “Favorite” button for many cable television boxes and satellite receivers. Button number 31 is the Delay button for the AVR, but the Open/Close button for CD players.

Note that the numbers used to describe the button functions above and on page 58 for the purposes of describing how a button operates are a different set of numbers than those used in the rest of this manual to describe the button functions for the AVR.

ENGLISH

PROGRAMMING THE REMOTE 55

Page 54 Page 56
Image 55
Page 54 Page 56
Contents AVR 347 Audio/ Video Receiver Declaration of Conformity Table of ContentsIntroduction Description and FeaturesImportant Safety Information Safety InformationDo not place the unit directly on a carpeted surface Installation LocationCleaning UnpackingFront Panel Controls Headphone Jack $ Speaker/Channel Input IndicatorSee page 44 for more information on the Channel Indicators # Preset Stations Selector Press thisDigital Input Selector When playing a Rear Panel Connections Digital Audio Outputs Connect these Rear Panel Connections Main Remote Control Functions See page 46 for more information Main Remote Control Functions Main Remote Control Functions Change the input Zone II.2 Remote Control FunctionsChangers Zone II.2 Remote Control Functions Hdmi Input Connections Installation and ConnectionsAudio Equipment Connections Hdmi ConnectionsWith the AVR 347 turned off, connect Video Equipment ConnectionsVideo Connection Notes Scart A/V ConnectionsVideo Video In/Out jacks, if it´s a recording VCR Important Note for the Use SCART-Cinch Adapters Important Note for Adapter CablesImportant Notes for S-Video connections TV, see item belowAC Power Connections System and Power ConnectionsMain Room Remote Control Extension BUS Installation ConnectionsSpeaker Selection Speaker PlacementFirst Turn On System ConfigurationUsing the On-Screen Display System SetupInput Setup Coax Source InputVideo Optical Surround Setup Night Mode Settings Stereo-Digital Mode Configuring the Surround Off Stereo ModesAutomated Speaker Setup Using EzSet/EQ Stereo-Direct Bypass ModeNavigation Buttons E to highlight System Configuration Speaker Size Setup Manual SetupCenter System Configuration Delay Settings Output Level Adjustment Main menu appears on the screen Up the Volume until you can hear the test noise clearlyWhen all channels have the same output level Is then pressed to select OFF in the highlighted videoOperation Surround Mode ChartMain speakers and a subwoofer Dolby 3 StereoReference WideVideo Input Selection Using the Sleep TimerBasic Operation Source SelectionChannel/8-Channel Direct Input Controls and Use of HeadphonesSurround Mode Selection Volume Up/Down ButtonsSelecting a Digital Source Digital Audio PlaybackDolby Digital PCM Audio PlaybackDigital Bitstream Indicators Surround Mode TypesIncoming Bitstream Available Surround Modes PCM Playback Indications Incoming Signal Available Surround ModesNight Mode Speaker/Channel IndicatorsSee Figure Menu Button UsingTape Recording Pressing the DMP Selector ButtonYou may then navigate the menus as explained above Output Level Adjustment With Source SignalsMemory Backup Normal output level adjustment forMultiroom Multiroom OperationSurround Amplifier Channel Assignment Remote room Or mute the output GFront-Panel-Display Fade Video AdjustmentsVideo Adjustments Advanced FeaturesFull-OSD Time Out Adjustment Advanced FeaturesTurn On Volume Level Semi-OSD SettingsBasic Tuner Operation Default Surround ModeRDS Display Options RDS TuningTuner Operation RDS OperationDirect Code Entry Programming the RemoteProgramming the Remote with Codes Code ReadoutPress the Input Selector 45 button Learning Codes from a RemoteErasing Learned Codes VID1/VCR VID3/TV VID2/CBL/SATPress the AVR Selector Erasing Macro CommandsMacro Programming Programmed Device FunctionsChannel Control Punch-Through Volume Punch-ThroughTransport Control Punch-Through Resetting the Remote Memory DVD Function ListAVR DVD Remote sensor Ú is obscured Troubleshooting GuideProcessor Reset Power Switch 1 is pushedTechnical Specifications Center Speaker Size VideoTable A4 Source Input Settings Harman Consumer Group, Inc

347 specifications

The Harman-Kardon 347 is a notable piece of audio equipment that combines advanced technological features with a user-friendly design to deliver high-quality sound. As a receiver, the Harman-Kardon 347 is engineered to cater to audiophiles who seek both performance and aesthetics in their home audio systems.

One of the standout features of the Harman-Kardon 347 is its powerful amplification capabilities. The receiver boasts a multi-channel design that allows it to deliver robust audio output, making it suitable for both music and home theater setups. Users can enjoy a well-balanced sound profile that ensures clarity across all frequencies, providing an immersive listening experience.

In terms of connectivity, the Harman-Kardon 347 is equipped with a plethora of input options. It supports various audio formats and allows for seamless integration with different devices, whether it be a CD player, Blu-ray player, or streaming device. The receiver includes multiple HDMI inputs, enabling high-definition video and audio transmission, which is essential for modern entertainment systems.

Another notable aspect of the Harman-Kardon 347 is its implementation of advanced audio technologies. It features Dolby Digital and DTS support, ensuring that users can experience surround sound as intended by content creators. This feature enhances the experience of watching movies or playing video games, allowing for a deeply immersive soundstage.

Moreover, the Harman-Kardon 347 has been designed with ease of use in mind. Its intuitive interface and remote control allow users to navigate through settings and inputs with minimal effort. The clear and organized layout makes it accessible for individuals who may not be as tech-savvy, ensuring that everyone can enjoy high-quality audio without a steep learning curve.

The build quality of the Harman-Kardon 347 also deserves mention. With its sleek and modern design, this receiver can seamlessly blend into any home decor. The attention to detail in its construction not only adds aesthetic appeal but also ensures durability, allowing users to enjoy this device for many years without concern.

In summary, the Harman-Kardon 347 stands out in the crowded market of audio receivers. With its robust amplification, multiple connectivity options, advanced audio technologies, user-friendly interface, and stylish design, it offers a comprehensive audio solution for both casual listeners and serious audiophiles alike. Whether for music enjoyment or enhancing the home theater experience, the Harman-Kardon 347 is well-equipped to meet and exceed expectations.
Top Page Image Contents