Harman-Kardon 347 owner manual Default Surround Mode, Basic Tuner Operation

Page 51

Advanced Features

Tuner Operation

Default Surround Mode

In normal operation, when the AVR senses a Dolby Digital or DTS digital audio data stream, it will automatically switch the appropriate default surround mode, with the AVR responding to the data flags that are encoded on the DVD disc or in the digital video broadcast. In most cases, this is the correct mode, but you may have a particu- lar preference for the mode you wish to hear when Dolby Digital or DTS is present. The AVR allows you to set the unit so that it will either respond to the default or switch to your desired mode.

If you wish to leave the default so that the mode choice encoded in the disc is always used, no further action is needed. Simply leave the setting at the factory default of ON.

To set the unit so that it responds to the last sur- round mode used when a Dolby Digital or DTS source is playing, press the /¤ Buttons D so that the blue cursor bar is highlighting the Default Surround Mode line. Press the Set Button F, followed by the / Buttons E so that OFF appears, and the setting will change. Press the Set Button

Fagain to confirm the new setting. The unit will now use the last mode, not the disc’s default for the two digitally encoded data streams.

This setting does not apply to standard PCM dig- ital inputs or to analog sources. In those cases, the unit will always apply the surround or pro- cessing mode that was last used for that input.

If you wish to make other adjustments, press the /¤ Buttons D until the blue cursor bar is highlighting the desired setting. If you have no other adjustments to make, press the OSD Button L to exit the menu system.

Basic Tuner Operation

The AVR 347’s tuner is capable of tuning AM, FM and FM Stereo broadcast stations and receiving RDS data. Stations may be tuned manually, or they may be stored as favorite station presets and recalled from a 30 position memory.

Station Selection

1.Press the AM/FM Tuner Select button 6 on the remote to select the tuner as an input. The tuner may be selected from the front panel by either pressing the Input Source Selector % until the tuner is active or by pressing the Tuner Band Selector ! at any time.

2.Press the AM/FM Tuner Select button 6 or Tuner Band Selector ! again to switch between AM and FM so that the desired frequency band is selected.

3.Press the Tuner Mode button I on the

remote or hold the Band Selector ! on the front panel pressed for 3 seconds to select manual or automatic tuning.

When the button is pressed so that AUTO appears in the Main Information Display Ò each press of the Tuning Selectors 8J will put the tuner in a scan mode that seeks the next higher or lower frequency station with accept- able signal strength. An AUTO ST TUNED indication will momentarily appear when the station stops at a stereo FM station, and an AUTO TUNED indication will momentarily appear when an AM or monaural FM station is tuned. Press the Tuning buttons again to scan to the next receivable station.

When the button is pressed so that MANUAL appears in the Main Information Display Ò each tap of the Selector will increased or decrease the frequency by one increment. When the tuner receives a strong enough signal for adequate reception, MANUAL TUNED will appear in the Main Information Display Ò.

4.Stations may also be tuned directly by press- ing the Direct button J, and then pressing the Numeric Keys H that correspond to the station’s frequency. Note that for entering num- bers higher than 100 you need to enter only the "1" rather than "10", the first "0" will be added automatically. The desired station will automatically be tuned after the latest number is entered. If you press an incorrect button while entering a direct frequency, press the Clear

button

to start over.

NOTE: When the FM reception of a stereo station is weak, audio quality will be increased by switching to Mono mode by pressing the Tuner Mode button I on the remote or holding the Band Selector ! on the front panel so that MANUAL appears momentarily in the Main Information Display Ò and then goes out.

Preset Tuning

Using the remote, up to 30 stations may be stored in the AVR’s memory for easy recall using the front panel controls or the remote.

To enter a station into the memory, first tune the station using the steps outlined above. Then:

1. Press the Memory button on the remote. Note that two underscore lines will

appear in the Main Information Display Ò.

2.Within five seconds, press the Numeric Keys H corresponding to the location where you wish to store this station’s frequency. Once entered, the preset number will appear in the Main Information Display Ò.

3.Repeat the process after tuning any additional stations to be preset.

Recalling Preset Stations

To manually select a station previously entered in the preset memory, press the Numeric Keys H that correspond to the desired station’s memory location.

To manually tune through the list of stored preset stations one by one, press the Preset

Stations Selector buttons #

on the

front panel or remote.

 

ENGLISH

TUNER OPERATION 51

Image 51
Contents AVR 347 Audio/ Video Receiver Declaration of Conformity Table of ContentsIntroduction Description and FeaturesImportant Safety Information Safety InformationDo not place the unit directly on a carpeted surface Installation LocationCleaning UnpackingFront Panel Controls Headphone Jack $ Speaker/Channel Input Indicator# Preset Stations Selector Press this See page 44 for more information on the Channel IndicatorsDigital Input Selector When playing a Rear Panel Connections Digital Audio Outputs Connect these Rear Panel Connections Main Remote Control Functions See page 46 for more information Main Remote Control Functions Main Remote Control Functions Zone II.2 Remote Control Functions Change the inputChangers Zone II.2 Remote Control Functions Hdmi Input Connections Installation and ConnectionsAudio Equipment Connections Hdmi ConnectionsWith the AVR 347 turned off, connect Video Equipment ConnectionsScart A/V Connections Video Connection NotesVideo Video In/Out jacks, if it´s a recording VCR Important Note for the Use SCART-Cinch Adapters Important Note for Adapter CablesImportant Notes for S-Video connections TV, see item belowAC Power Connections System and Power ConnectionsMain Room Remote Control Extension BUS Installation ConnectionsSpeaker Selection Speaker PlacementFirst Turn On System ConfigurationUsing the On-Screen Display System SetupInput Setup Source Input CoaxVideo Optical Surround Setup Night Mode Settings Stereo-Digital Mode Configuring the Surround Off Stereo ModesAutomated Speaker Setup Using EzSet/EQ Stereo-Direct Bypass ModeNavigation Buttons E to highlight System Configuration Speaker Size Setup Manual SetupCenter System Configuration Delay Settings Output Level Adjustment Main menu appears on the screen Up the Volume until you can hear the test noise clearlyWhen all channels have the same output level Is then pressed to select OFF in the highlighted videoOperation Surround Mode ChartMain speakers and a subwoofer Dolby 3 StereoReference WideVideo Input Selection Using the Sleep TimerBasic Operation Source SelectionChannel/8-Channel Direct Input Controls and Use of HeadphonesSurround Mode Selection Volume Up/Down ButtonsSelecting a Digital Source Digital Audio PlaybackDolby Digital PCM Audio PlaybackSurround Mode Types Digital Bitstream IndicatorsIncoming Bitstream Available Surround Modes PCM Playback Indications Incoming Signal Available Surround ModesSpeaker/Channel Indicators Night ModeSee Figure Menu Button UsingTape Recording Pressing the DMP Selector ButtonYou may then navigate the menus as explained above Output Level Adjustment With Source SignalsMemory Backup Normal output level adjustment forMultiroom Operation MultiroomSurround Amplifier Channel Assignment Remote room Or mute the output GFront-Panel-Display Fade Video AdjustmentsVideo Adjustments Advanced FeaturesFull-OSD Time Out Adjustment Advanced FeaturesTurn On Volume Level Semi-OSD SettingsBasic Tuner Operation Default Surround ModeRDS Display Options RDS TuningTuner Operation RDS OperationDirect Code Entry Programming the RemoteProgramming the Remote with Codes Code ReadoutPress the Input Selector 45 button Learning Codes from a RemoteErasing Learned Codes VID1/VCR VID3/TV VID2/CBL/SATPress the AVR Selector Erasing Macro CommandsMacro Programming Programmed Device FunctionsVolume Punch-Through Channel Control Punch-ThroughTransport Control Punch-Through Resetting the Remote Memory DVD Function ListAVR DVD Remote sensor Ú is obscured Troubleshooting GuideProcessor Reset Power Switch 1 is pushedTechnical Specifications Center Speaker Size VideoTable A4 Source Input Settings Harman Consumer Group, Inc

347 specifications

The Harman-Kardon 347 is a notable piece of audio equipment that combines advanced technological features with a user-friendly design to deliver high-quality sound. As a receiver, the Harman-Kardon 347 is engineered to cater to audiophiles who seek both performance and aesthetics in their home audio systems.

One of the standout features of the Harman-Kardon 347 is its powerful amplification capabilities. The receiver boasts a multi-channel design that allows it to deliver robust audio output, making it suitable for both music and home theater setups. Users can enjoy a well-balanced sound profile that ensures clarity across all frequencies, providing an immersive listening experience.

In terms of connectivity, the Harman-Kardon 347 is equipped with a plethora of input options. It supports various audio formats and allows for seamless integration with different devices, whether it be a CD player, Blu-ray player, or streaming device. The receiver includes multiple HDMI inputs, enabling high-definition video and audio transmission, which is essential for modern entertainment systems.

Another notable aspect of the Harman-Kardon 347 is its implementation of advanced audio technologies. It features Dolby Digital and DTS support, ensuring that users can experience surround sound as intended by content creators. This feature enhances the experience of watching movies or playing video games, allowing for a deeply immersive soundstage.

Moreover, the Harman-Kardon 347 has been designed with ease of use in mind. Its intuitive interface and remote control allow users to navigate through settings and inputs with minimal effort. The clear and organized layout makes it accessible for individuals who may not be as tech-savvy, ensuring that everyone can enjoy high-quality audio without a steep learning curve.

The build quality of the Harman-Kardon 347 also deserves mention. With its sleek and modern design, this receiver can seamlessly blend into any home decor. The attention to detail in its construction not only adds aesthetic appeal but also ensures durability, allowing users to enjoy this device for many years without concern.

In summary, the Harman-Kardon 347 stands out in the crowded market of audio receivers. With its robust amplification, multiple connectivity options, advanced audio technologies, user-friendly interface, and stylish design, it offers a comprehensive audio solution for both casual listeners and serious audiophiles alike. Whether for music enjoyment or enhancing the home theater experience, the Harman-Kardon 347 is well-equipped to meet and exceed expectations.