Harman-Kardon 347 owner manual Volume Punch-Through, Channel Control Punch-Through

Page 56

Programming the Remote

Notes on Using the AVR

Remote With Other Devices.

•Manufacturers may use different code sets for the same product category. For that reason, it is important that you check to see if the code set you have entered operates as many controls as possible. If it appears that only a few functions operate, check to see if another code set will work with more buttons.

•Depending on the brand and product type used the functions listed in the Function List tables may not correspond with the function the unit reacts on the command. In these cases it’s a good idea to edit the reaction of the unit into the corresponding line of the table or to set up a separate list.

•When a button is pressed on the AVR remote, the red light under the Input Selector 45 for the product being operated should flash briefly. If the Device Control Selector flashes for some but not all buttons for a particular product, it does NOT indicate a problem with the remote, but rather that no function is programmed for the button being pushed.

Volume Punch-Through

The AVR’s remote may be programmed to

operate the Volume Control and the

Mute from either the TV or the AVR in con- junction with any of the devices controlled by the remote. For example, since the AVR will likely be used as the sound system for TV viewing, you may wish to have the AVR’s volume activated although the remote is set to run the TV. Either the AVR or TV volume control may be associated with any of the remote´s devices.

To program the remote for Volume Punch- Through, follow these steps:

1.Press the Input Selector 4 for the unit you wish to have associated with the volume control

and the Mute button at the same time until the red light illuminates under the Input Selector

4and note that the Program Indicator 2 will flash amber.

2. Press the Volume Up button and note that the Program Indicator 2 will stop flashing and stay amber.

3.Press either the AVR Selector 5 or the Input Selector 4, depending on which system’s volume control you wish to have attached for the punch-through mode. The Program Indicator 2 will blink green three times and then go out to confirm the data entry.

Example: To have the AVR’s volume control activated even though the remote is set to con- trol the TV, first press the Video/TV Input

Selector 4 and the Mute button at the same time. Next, press the Volume Up button

,followed by the AVR Input Selector 5.

NOTE: Should you wish to return the remote to the original configuration after entering a Volume Punch-Through, you will need to repeat the steps shown above. However, press the same Input Selector in steps one and three.

Channel Control Punch-Through

The AVR’s remote may be programmed to oper- ate so that the channel control function, per- formed with the Sleep 9 and Surround A buttons, for either the TV, cable or satellite receiver used in your system may be used in con- junction with one of the other devices controlled by the remote. For example, while using and controlling the VCR, you may wish to change channels on a cable box or satellite receiver without having to change the device selected by the AVR or the remote. To program the remote for Channel Control Punch-Through, follow these steps:

1.Press the Input Selector button 4 for the device you wish to have the channel control

associated with and the Mute button at the same time until the red light illuminates under the Input Selector 4 and the Program Indicator 2 flashes amber.

2. Press the Volume Down button . The Program Indicator 2 will stop flashing and stay amber.

3.Press and release the AVR 5 or Input Selector button 4 for the device that will be used to change the channels. The Program Indicator 2 will blink green three times and then go out to confirm the data entry.

Example: To control the channels using your TV while the remote is set to control the VCR, first press the VID 1/VCR Input Selector button

4 and the Mute button at the same time. Next, release them and press the Volume Down

button , followed by the same Input

Selector button 4.

NOTE: To remove the Channel Control Punch- Through and return the remote to its original con- figuration, repeat the steps shown in the example above. However, press the same Input Selector in Steps 1 and 3.

Transport Control Punch-Through

The AVR’s remote may be programmed to operate so that the Transport Control Functions P (Play, Stop, Fast Forward, Rewind, Pause and Record) for a VCR, DVD or CD will operate in con- junction with one of the other devices controlled by the remote. For example, while using and con- trolling the TV, you may wish to start or stop your VCR or DVD without having to change the device selected by the AVR or the remote. To program the remote for Transport Control Punch-Through, follow these steps:

1.Press the Input Selector 4 for the device you wish to have the channel control associated

with and the Mute button at the same time until the red light illuminates, under the Input Selector 4 and the Program Indicator 2 flashes amber.

2.Press the Play button P. The Program Indicator 2 will stop flashing and stay amber.

3.Press and release the AVR 5 or Input Selector button 4 for the device that will be used to change the channels. The Program Indicator 2 will blink green three times and then go out to confirm the data entry.

Example: To control the transport of a CD player while the remote is set to control the TV, press the VID 2/TV Input Selector button 4 and the

Mute button at the same time. Next, release them and press the Play button P, followed by the CD Input Selector button 4.

NOTE: To remove the Channel Control Punch- Through and return the remote to its original con- figuration, repeat the steps shown in the example above. However, press the same Input Selector in Steps 1 and 3.

NOTE: Before programming the remote for Volume, Channel or Transport Punch-Through, make certain that any programming needed for the specific TV, CD, DVD, Cable or Satellite Receivers has been completed.

56PROGRAMMING THE REMOTE

Page 55 Page 57
Image 56
Page 55 Page 57
Contents AVR 347 Audio/ Video Receiver Table of Contents Declaration of ConformityDescription and Features IntroductionSafety Information Important Safety InformationInstallation Location CleaningUnpacking Do not place the unit directly on a carpeted surfaceHeadphone Jack $ Speaker/Channel Input Indicator Front Panel ControlsDigital Input Selector When playing a # Preset Stations Selector Press thisSee page 44 for more information on the Channel Indicators Rear Panel Connections Digital Audio Outputs Connect these Rear Panel Connections Main Remote Control Functions See page 46 for more information Main Remote Control Functions Main Remote Control Functions Changers Zone II.2 Remote Control FunctionsChange the input Zone II.2 Remote Control Functions Installation and Connections Audio Equipment ConnectionsHdmi Connections Hdmi Input ConnectionsVideo Equipment Connections With the AVR 347 turned off, connectVideo Video In/Out jacks, if it´s a recording VCR Scart A/V ConnectionsVideo Connection Notes Important Note for Adapter Cables Important Notes for S-Video connectionsTV, see item below Important Note for the Use SCART-Cinch AdaptersSystem and Power Connections Main Room Remote Control ExtensionBUS Installation Connections AC Power ConnectionsSpeaker Placement Speaker SelectionSystem Configuration Using the On-Screen DisplaySystem Setup First Turn OnInput Setup Video Optical Source InputCoax Surround Setup Night Mode Settings Configuring the Surround Off Stereo Modes Automated Speaker Setup Using EzSet/EQStereo-Direct Bypass Mode Stereo-Digital ModeNavigation Buttons E to highlight System Configuration Manual Setup Speaker Size SetupCenter System Configuration Delay Settings Output Level Adjustment Up the Volume until you can hear the test noise clearly When all channels have the same output levelIs then pressed to select OFF in the highlighted video Main menu appears on the screenSurround Mode Chart OperationDolby 3 Stereo ReferenceWide Main speakers and a subwooferUsing the Sleep Timer Basic OperationSource Selection Video Input SelectionControls and Use of Headphones Surround Mode SelectionVolume Up/Down Buttons Channel/8-Channel Direct InputDigital Audio Playback Dolby DigitalPCM Audio Playback Selecting a Digital SourceIncoming Bitstream Available Surround Modes Surround Mode TypesDigital Bitstream Indicators Incoming Signal Available Surround Modes PCM Playback IndicationsSee Figure Speaker/Channel IndicatorsNight Mode Using Tape RecordingPressing the DMP Selector Button Menu ButtonOutput Level Adjustment With Source Signals Memory BackupNormal output level adjustment for You may then navigate the menus as explained aboveSurround Amplifier Channel Assignment Multiroom OperationMultiroom Or mute the output G Remote roomVideo Adjustments Video AdjustmentsAdvanced Features Front-Panel-Display FadeAdvanced Features Turn On Volume LevelSemi-OSD Settings Full-OSD Time Out AdjustmentDefault Surround Mode Basic Tuner OperationRDS Tuning Tuner OperationRDS Operation RDS Display OptionsProgramming the Remote Programming the Remote with CodesCode Readout Direct Code EntryLearning Codes from a Remote Erasing Learned CodesVID1/VCR VID3/TV VID2/CBL/SAT Press the Input Selector 45 buttonErasing Macro Commands Macro ProgrammingProgrammed Device Functions Press the AVR SelectorTransport Control Punch-Through Volume Punch-ThroughChannel Control Punch-Through Resetting the Remote Memory Function List DVDAVR DVD Troubleshooting Guide Processor ResetPower Switch 1 is pushed Remote sensor Ú is obscuredTechnical Specifications Video Center Speaker SizeTable A4 Source Input Settings Harman Consumer Group, Inc

347 specifications

The Harman-Kardon 347 is a notable piece of audio equipment that combines advanced technological features with a user-friendly design to deliver high-quality sound. As a receiver, the Harman-Kardon 347 is engineered to cater to audiophiles who seek both performance and aesthetics in their home audio systems.

One of the standout features of the Harman-Kardon 347 is its powerful amplification capabilities. The receiver boasts a multi-channel design that allows it to deliver robust audio output, making it suitable for both music and home theater setups. Users can enjoy a well-balanced sound profile that ensures clarity across all frequencies, providing an immersive listening experience.

In terms of connectivity, the Harman-Kardon 347 is equipped with a plethora of input options. It supports various audio formats and allows for seamless integration with different devices, whether it be a CD player, Blu-ray player, or streaming device. The receiver includes multiple HDMI inputs, enabling high-definition video and audio transmission, which is essential for modern entertainment systems.

Another notable aspect of the Harman-Kardon 347 is its implementation of advanced audio technologies. It features Dolby Digital and DTS support, ensuring that users can experience surround sound as intended by content creators. This feature enhances the experience of watching movies or playing video games, allowing for a deeply immersive soundstage.

Moreover, the Harman-Kardon 347 has been designed with ease of use in mind. Its intuitive interface and remote control allow users to navigate through settings and inputs with minimal effort. The clear and organized layout makes it accessible for individuals who may not be as tech-savvy, ensuring that everyone can enjoy high-quality audio without a steep learning curve.

The build quality of the Harman-Kardon 347 also deserves mention. With its sleek and modern design, this receiver can seamlessly blend into any home decor. The attention to detail in its construction not only adds aesthetic appeal but also ensures durability, allowing users to enjoy this device for many years without concern.

In summary, the Harman-Kardon 347 stands out in the crowded market of audio receivers. With its robust amplification, multiple connectivity options, advanced audio technologies, user-friendly interface, and stylish design, it offers a comprehensive audio solution for both casual listeners and serious audiophiles alike. Whether for music enjoyment or enhancing the home theater experience, the Harman-Kardon 347 is well-equipped to meet and exceed expectations.
Top Page Image Contents