Maytag 99043751D, W10112419D installation instructions Range Hood Care, Cleaning, U.S.A, Canada

Page 11

RANGE HOOD CARE

Cleaning

IMPORTANT: Clean the hood and grease filters frequently according to the following instructions. Replace grease filters before operating hood.

Exterior Surfaces:

To avoid damage to the exterior surface, do not use steel wool or soap-filled scouring pads.

Always wipe dry to avoid water marks.

Cleaning Method:

Liquid detergent soap and water, or all-purpose cleanser

Wipe with damp soft cloth or nonabrasive sponge, then rinse with clean water and wipe dry.

Metal Grease Filter:

For vented installations:

1.Turn the filter retainer to release filter.

A

A. Filter retainer

2.Wash metal filters as needed in dishwasher or hot detergent solution.

3.Reinstall the filter by placing the back edge in the channel at rear of hood. Push filter into place, turn the filter retainer to reattach filter to range hood.

Non-Vented (recirculating) Installation Filters:

The charcoal filter is not washable. Replace with Kit Number 4378581.

To replace charcoal filter:

1.Turn the filter retainer to release the charcoal filter.

2.Install new charcoal filter with the blue side against the range hood by placing back edge of filter in channel at rear of range hood.

3.Push filter up into place. Turn the filter retainer to reattach filter to range hood.

ASSISTANCE OR SERVICE

When calling for assistance or service, please know the purchase date and the complete model and serial number of your appliance. This information will help us to better respond to your request.

If you need replacement parts

If you need to order replacement parts, we recommend that you use only factory specified parts. Factory specified parts will fit right and work right because they are made with the same precision used to build every new appliance. To locate factory specified replacement parts in your area, call us or your nearest designated service center.

In the U.S.A.

Call the Whirlpool Customer eXperience Center toll free: 1-800-253-1301.

Our consultants provide assistance with:

Features and specifications on our full line of appliances.

Installation information.

Use and maintenance procedures.

Accessory and repair parts sales.

Specialized customer assistance (Spanish speaking, hearing impaired, limited vision, etc.).

Referrals to local dealers, repair parts distributors and service companies. Whirlpool designated service technicians are trained to fulfill the product warranty and provide after- warranty service, anywhere in the United States.

To locate the Whirlpool designated service company in your area, you can also look in your telephone directory Yellow Pages.

For further assistance

If you need further assistance, you can write to Whirlpool Corporation with any questions or concerns at:

Whirlpool Brand Home Appliances

Customer eXperience Center

553 Benson Road

Benton Harbor, MI 49022-2692

Please include a daytime phone number in your correspondence.

In Canada

Call the Whirlpool Canada LP Customer eXperience Centre toll free: 1-800-807-6777.

Our consultants provide assistance with:

Features and specifications on our full line of appliances.

Use and maintenance procedures.

Accessory and repair parts sales.

Referrals to local dealers, repair parts distributors, and service companies. Whirlpool Canada LP designated service technicians are trained to fulfill the product warranty and provide after-warranty service, anywhere in Canada.

For further assistance

If you need further assistance, you can write to Whirlpool Canada LP with any questions or concerns at:

Customer eXperience Centre

Whirlpool Canada LP

200 - 6750 Century Ave.

Mississauga, Ontario L5N 0B7

Please include a daytime phone number in your correspondence.

11

Image 11
Contents Range Hood Table of Contents Range Hood SafetyImportant Safety Instructions Location Requirements Installation RequirementsTools and Parts Makeup Air Cabinet DimensionsCold Weather Installations Venting RequirementsExample vent system Calculating Vent System LengthCm Vent System ¹⁄₄ x 10 8.3 cm x 25.4 cm Vent SystemPrepare Location Installation InstructionsDetermine Wiring Hole Location Electrical RequirementsTo make a 4 x 10½ 10.2 cm x 26.7 cm rectangle in the wall To wire through topTo wire through rear wall Wall VentingFor Power Supply Installations Install Range HoodFor vented model installations only Range Hood Controls Complete InstallationRange Hood USE Make Electrical ConnectionCanada CleaningRange Hood Care U.S.AThis limited warranty does not cover Whirlpool Corporation Major Appliance WarrantyVotre sécurité et celle des autres est très importante Sécurité DE LA Hotte DE CuisinièreImportantes Instructions DE Sécurité Outillage et pièces Exigences DinstallationExigences demplacement Méthodes dévacuation Installations pour régions à climat froidExigences concernant l’évacuation Air dappointSystème de décharge de 3¹⁄₄ x 10 8,3 cm x 25,4 cm Spécifications électriquesCalcul de la longueur du circuit dévacuation Système de décharge de 6 15,2 cmPréparation Instructions DinstallationPréparation de lemplacement Déterminer lemplacement du trou de passage du câbleCâblage à travers le mur arrière Cm x 25,4 cm Décharge à travers le toitDécharge à travers le mur Couverte Installation de la hotteSoulever la hotte sous le placard et déterminer sa position Raccordement par câblage direct Achever linstallationInstaller une lampe à incandescence de 75 watts maximum Raccordement électriqueNettoyage Commandes de la hotte de cuisinièreUtilisation DE LA Hotte DE Cuisinière Entretien DE LA HotteSi vous avez besoin de pièces de rechange Assistance OU ServiceGarantie DES Gros Appareils Ménagers Whirlpool Corporation Au CanadaW10112419D