INSTALLATION INSTRUCTIONS
CONNECTION TO ELECTRICITY
SUPPLY
WARNING: This appliance must be earthed, do not earth this appliance to the gas supply piping.
This appliance must be connected to a isolated |
|
| |
incorporates a 3 ampere fuse. If any other type |
|
of plug is used it should incorporate a 5 ampere |
|
fuse in either the plug or adapter or at the |
|
distribution board. The appliance is supplied |
|
with 2 metres (6.5 ft) of 5 ampere 3 core cable |
|
fitted with a moulded plug. If this proves |
|
insufficient to allow the appliance to be plugged |
|
into the nearest supply socket, the supply cable |
|
can be either extended by using a B.E.A.B. |
|
approved |
|
integral flex clamps. |
|
DO NOT EXTEND THE CABLE USING |
|
PLASTIC OR CERAMIC CONNECTION |
|
TERMINAL BLOCKS AND/OR INSULATION |
|
TAPE. |
|
Should the supplied cable be required to be |
|
threaded through small apertures in the |
|
cabinets it can be removed from the mains |
|
plug. |
|
If the supplied moulded plug is cut off |
|
dispose of it safely as it will be a shock |
|
hazard if inserted into a 13 amp socket |
|
elsewhere in the house. |
|
To fit a 3 pin 13 amp plug to the end of the |
|
appliance cable (Fig.9). Connect the wires as |
|
follows: |
|
BROWN to the live terminal. |
|
BLUE to the neutral terminal. | Fig.9 |
GREEN / YELLOW to the earth terminal. |
38