Viking M0706VR manual Clocks and Timers Digital Display

Page 9
CLOCK/ BAKE
PROBE HOURS
SET
SET
MIN/SEC START
TIMER TIME
(Digital Display)

Product Controls

Clocks and Timers

Electronic

Timing Center

(Digital Display)

The Electronic Timing Center is used to

program and control

all timing functions. It has five display and programming modes that are activated by the four push buttons and the “SET” knob. Both the Bake Hours mode and the Min/Sec Timer mode can be used to time cooking periods. These features can even be used at the same time when both ovens are in use. However, only Bake Hours and Self-Cleaning modes shut the oven off automatically when the timed program is over. For example, you can time bake a casserole in the upper oven using the Bake Hours mode, while broiling in the lower oven using the Min/Sec Timer. One oven can also be cleaned while timing foods in the other oven using the Min/Sec Timer.

Setting the Min/Sec Timer

The Min/Sec Timer is designed for accurate timing and is ideal for baking delicate items such as biscuits, cookies, and popovers, and for precise broiling. The Min/Sec Timer can be used at the same time the Bake Hours or Start Time functions are in use. It can be used for timing up to 24 hours. When setting the timer, the time displayed will increase in 1 minute increments. When the timer counts down to 1 minute, the timer alarm will give two short beeps and the display changes from hours:minutes to seconds only.

To program the Min/Sec Timer

1.Press the “MIN/SEC TIMER” button. The timer will display :00 and the word TIMER will be displayed in the lower right corner.

2.Turn the “SET” knob until the desired duration time is displayed.

The Min/Sec Timer is now programmed. The alarm will sound at the end of the countdown. The program can be canceled anytime by setting the remaining time to :00. To change back to the time-of-day, press the “CLOCK” button. Notice that a small clock will be displayed in the upper right corner to indicate that a program is in progress. The display will return automatically to the Min/Sec Timer after a few seconds.

Clocks and Timers (Digital Display)

Timer Alarm

At the end of a Min/Sec Timer program or Bake Hours program, the alarm will consist of three beeps followed by two beeps every 10 seconds until the “MIN/SEC TIMER” button is pressed.

Whenever a valid function key is pressed or when a control function starts automatically, one beep will be sounded. When an invalid function key is pressed, two beeps will be sounded.

Setting the Automatic Start Time Bake Program

The Bake Hours and Start Time modes of the timer can be used to automatically turn the oven on and off at a preselected time. The Automatic Time Bake program is ideal for foods with no danger of spoilage during the time the oven is left off.

To Set The Automatic Time Bake Program:

1.Set the start time:

A)For Single Ovens – Program the start time by pressing the “START TIME” button and turning the “SET” knob until the desired start time is displayed. This is the time of day you want the food to begin cooking.

B)For Double Ovens – Press the “START TIME” button once to set the starting time for the upper oven (UPPER OVEN will show on the display). Press the “START TIME” button twice to set the starting time for the lower oven (LOWER OVEN

will show on the display). Then program the start time by turning the “SET” knob until the desired start time is displayed. This is the time of day you want the food to begin cooking.

2.Set the desired baking time:

Once the start time is set, the display will switch to :00 and the words SET, COOK and TIME will appear on the right side of the display. You will now enter the desired baking time. Turn the “SET” knob until the desired baking time is displayed in hours and minutes. Once the desired bake time is set, the

word SET will disappear and the word DELAY will appear in the display indicating that the Bake Hours program has been set.

NOTE: For Double Ovens, the word DELAY will show with either UPPER OVEN or LOWER OVEN depending on which oven has been selected.

Product Controls

16

17

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Built-In Electric Single and Double Ovens VikingCongratulations Table of Contents Digital Display Important Safety Instructions Setting the ClockAnalog Display StartedOven Control Panel Designer Models Oven Control PanelProduct Controls Controls ProductTemperature Control Built-In Electric Oven FeaturesInterior Oven Light Control Two-Element BakeOven Settings and Functions Convection RoastConvection Broil Medium-Broil High-BroilClocks and Timers Digital Display Clocks and Timers Analog Clock To program the Min/SecTimerSynchronizing the Analog Digital Clocks To Set The Bake Hours Program Setting the Bake Hours ProgramClocks and Timers Probe FunctionTo Set the Automatic Probe Function Cooking with your Oven Rack PositionsCooking Tips Conventional Baking Chart Pan Placement TipsBaking Tips Solving Baking Problems Convection Baking ChartRoasting Instructions Using the Meat Probe Premiere ModelsConventional Roasting Chart Convection Roasting ChartTips To Use High-Broil Broiling InstructionsTo Use Medium-Broil and Low-Broil Broiling TipsBroiling Chart Cleaning & MaintenanceOther Instructions Cleaning and Maintenance To start the Self-Clean cycle Before starting the Self-Clean cycleTo stop the Self-Clean cycle Power FailureService Information Trouble Shooting GuideIf service is required If your oven should fail to operatePage Viking Range Corporation

M0706VR specifications

The Viking M0706VR is a powerful vacuum cleaner that stands out in the realm of home cleaning appliances, known for its outstanding performance and user-friendly design. This model is a bagless canister vacuum that offers an array of features designed to meet the demands of modern households.

One of the key features of the Viking M0706VR is its advanced cyclonic technology. This technology helps in maintaining powerful suction over time by separating dirt and debris from the air. The result is an efficient cleaning experience that doesn’t compromise on suction power, even as the dust container fills up.

Another significant characteristic of the M0706VR is its lightweight design. Weighing in at an impressive 10 pounds, this vacuum is easy to maneuver across various surfaces, making it ideal for users of all ages. Its ergonomic handle ensures comfort during extended cleaning sessions, reducing user fatigue.

The M0706VR is equipped with a HEPA filtration system that traps allergens and fine dust particles, making it an excellent choice for allergy sufferers. This filtration system captures up to 99.97% of particles that are 0.3 microns or larger, ensuring that the air expelled is cleaner than the air in your home.

Versatility is another hallmark of the Viking M0706VR. The vacuum comes with multiple attachments, including a crevice tool, dusting brush, and upholstery nozzle. These attachments allow for a thorough clean of various surfaces, from carpets and hardwood floors to furniture and tight corners.

One of the standout technologies in the M0706VR is its automatic cord rewind feature. This utility helps in quick and effortless storage, minimizing clutter and potential tripping hazards. Additionally, the vacuum's adjustable suction settings enable users to customize cleaning based on the surface type.

The M0706VR also showcases a quiet operation, allowing you to clean without disturbing others, making it suitable for both day and night use. Its durable construction ensures that it can withstand regular use, while its stylish design complements any home décor.

In conclusion, the Viking M0706VR is a versatile and efficient cleaning appliance that combines modern technology with practical features. Its advanced filtration system, lightweight design, and powerful suction make it an excellent investment for anyone seeking a reliable vacuum cleaner for their home.
Top Page Image Contents