Viking M0706VR Important Safety Instructions Setting the Clock, Digital Display, Analog Display

Started

Important Safety Instructions

Setting the Clock

Getting

Getting

• Do not heat unopened food containers; buildup of pressure may cause

the container to explode and result in injury.

• Always position oven racks in desired location while oven is cool. If rack

must be moved while oven is hot, do not let potholder contact hot

heating element in oven.

• Use care when opening oven door. Let hot air or steam escape before

removing or replacing food. Hot air or steam can cause burns to hands,

face and/or eyes.

Digital Display

The time-of-day must be set before any other program can be used. When your oven is first connected to the power in your home, the timer display will show --:--.

To program the time-of-day:

SET

CLOCK/	BAKE	SET	MIN/SEC	START
PROBE	HOURS		TIMER	TIME

Started

• Keep oven vents unobstructed. The oven vent is located at the front of

the oven and vents into the room.

• Do not clean door gasket. It is essential for a good tight seal. Care should

be taken not to rub, damage, or move the gasket.

• No commercial oven cleaner or oven liner protective coating such as

aluminum foil should be used in or around any part of the oven. Improper

oven liners may result in a risk of electric shock or fire. Keep oven free

from grease buildup.

• Before self-cleaning the oven, remove broiler pan, broiler grid, oven racks,

and other utensils. Do not use your oven to clean other parts. A fan noise

should be heard during the cleaning cycle. If not, call service before self-

cleaning again.

• DO NOT TOUCH HEATING ELEMENTS OR INTERIOR SURFACES OF

OVEN. Heating elements may be hot even though they are dark in color.

Interior surfaces of an oven become hot enough to cause burns. During

and after use, do not touch or let clothing or other flammable materials

contact heating elements or interior surfaces of oven until they have had

sufficient time to cool. Other surfaces of the oven may become hot

enough to cause burns, such as the oven vent opening, the surface near

the vent opening, and the oven door window.

SAVE THESE INSTRUCTIONS

1.Press the “CLOCK/PROBE”* button once. 12:00 will be displayed with the word SET in the upper right corner.

2.Turn the “SET” knob until the correct time-of-day is displayed. AM and PM are not indicated.

3.Press the “CLOCK/PROBE” button again. The word SET will disappear and the correct time is now set into the timer.

The time-of-day can be changed by following steps 1 through 3. It cannot be changed while

there is a Bake Hours or Start Time cycle programmed into the timer.

Analog Display
(Designer Timepiece Models)
The time-of-day must be set
before any other program
can be used. When your	timer	bake	Set	start	probe
oven is first connected to the		hours		time	temp
power in your home, the
digital display will show
00:00. To program the
time-of-day:

1.Push and hold the “timer” and “bake hours” buttons at the same time.

2.Turn the “Set” knob until correct time is displayed on the digital clock.

3.Release “timer” and “bake hours” buttons.

The analog clock will automatically set after the digital time is set.

*NOTE: The PROBE function is included on Premiere Models.

6 7