Viking M0706VR manual Cleaning and Maintenance

Page 20

Product Care

Cleaning and Maintenance

Control Knobs

MAKE SURE ALL THE CONTROL KNOBS POINT TO THE OFF POSITION BEFORE REMOVING. Pull the knobs straight off. Wash in detergent and warm water. Dry completely and replace by pushing firmly onto stem.

Stainless Steel Parts

All stainless steel body parts should be wiped regularly with hot soapy water at the end of each cooling period and with a liquid cleaner designed for that material when soapy water will not do the job. Do not use steel wool, abrasive cloths, cleansers, or powders. If necessary, scrape stainless steel to remove encrusted materials, soak the area with hot towels to loosen the material, then use a wooden or nylon spatula or scraper. Do not use a metal knife, spatula, or any other metal tool to scrape stainless steel. Do not permit citrus or tomato juice to remain on stainless steel surface, as citric acid will permanently discolor stainless steel. Wipe up any spills immediately.

Brass Parts

CAUTION

All special ordered brass parts are coated with an epoxy coating.

DO NOT USE BRASS CLEANERS OR ABRASIVE CLEANERS ON ANY BRASS PARTS. All brass body parts should be wiped regularly with hot soapy water. When hot soapy water will not do the job, use every day household cleaners that are not abrasive.

Broiler Pan and Grid

Clean with detergent and hot water. For stubborn spots, use a soap-filled steel wool pad.

Oven Racks

Clean with detergent and hot water. Stubborn spots can be scoured with a soap-filled steel wool pad. DO NOT CLEAN THE OVEN RACKS USING THE SELF-CLEAN CYCLE. They could sustain damage due to the extreme heat of the Self-Clean cycle. The oven rack supports are designed to remain in the oven during the Self- Clean cycle.

Meat Probe

The meat probe may be cleaned with soap and water or a soap- filled scouring pad. Cool the probe before cleaning. Scour stubborn spots with a soap-filled scouring pad, rinse and dry.

•Do not immerse the meat probe in water.

•Do not store the probe in the oven.

Cleaning and Maintenance

DANGER

To Prevent Personal Injury

Before removing the doors, make sure the pins are properly installed in the hinges. Failure to do so can result in personal injury to hands and/or fingers.

WARNING

Burn or Electrical Shock Hazard

Make sure all controls are OFF and oven is COOL before cleaning. Failure to do so can result in burns or electrical shock.

CAUTION

Do not touch the exterior portions of the oven after self-cleaning cycle has begun, since some parts become extremely hot to the touch! During the first few times the self-cleaning feature is used, there may be some odor and smoking from the curing of the binder in the high- density insulation used in the oven. When the insulation is thoroughly cured, this odor will disappear. During subsequent self-cleaning cycles, you may sense an odor characteristic of high temperatures. Keep the kitchen well-vented during the self-cleaning cycle.

Self-Clean Cycle

This oven features an automatic pyrolytic self-cleaning cycle. During this cycle, the oven reaches elevated temperatures in order to burn off soil and deposits. An integral smoke eliminator helps reduce odors associated with the soil burn-off. A powder ash residue is left in the bottom of the oven after completion of the Self-Clean cycle. The door latch is automatically activated after selecting the Self-Clean setting. The latch ensures that the door cannot be opened while the oven interior is at clean temperatures.

Product Care

38

39

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Viking Built-In Electric Single and Double OvensCongratulations Table of Contents Important Safety Instructions Setting the Clock Digital DisplayAnalog Display StartedOven Control Panel Oven Control Panel Designer ModelsProduct Controls Controls ProductBuilt-In Electric Oven Features Temperature ControlInterior Oven Light Control Two-Element BakeConvection Broil Oven Settings and FunctionsConvection Roast High-Broil Medium-BroilClocks and Timers Digital Display Synchronizing the Analog Digital Clocks Clocks and Timers Analog ClockTo program the Min/SecTimer Setting the Bake Hours Program To Set The Bake Hours ProgramTo Set the Automatic Probe Function Clocks and TimersProbe Function Cooking Tips Cooking with your OvenRack Positions Baking Tips Conventional Baking ChartPan Placement Tips Convection Baking Chart Solving Baking ProblemsUsing the Meat Probe Premiere Models Roasting InstructionsTips Conventional Roasting ChartConvection Roasting Chart Broiling Instructions To Use High-BroilTo Use Medium-Broil and Low-Broil Broiling TipsOther Instructions Broiling ChartCleaning & Maintenance Cleaning and Maintenance Before starting the Self-Clean cycle To start the Self-Clean cycleTo stop the Self-Clean cycle Power FailureTrouble Shooting Guide Service InformationIf service is required If your oven should fail to operatePage Viking Range Corporation

M0706VR specifications

The Viking M0706VR is a powerful vacuum cleaner that stands out in the realm of home cleaning appliances, known for its outstanding performance and user-friendly design. This model is a bagless canister vacuum that offers an array of features designed to meet the demands of modern households.

One of the key features of the Viking M0706VR is its advanced cyclonic technology. This technology helps in maintaining powerful suction over time by separating dirt and debris from the air. The result is an efficient cleaning experience that doesn’t compromise on suction power, even as the dust container fills up.

Another significant characteristic of the M0706VR is its lightweight design. Weighing in at an impressive 10 pounds, this vacuum is easy to maneuver across various surfaces, making it ideal for users of all ages. Its ergonomic handle ensures comfort during extended cleaning sessions, reducing user fatigue.

The M0706VR is equipped with a HEPA filtration system that traps allergens and fine dust particles, making it an excellent choice for allergy sufferers. This filtration system captures up to 99.97% of particles that are 0.3 microns or larger, ensuring that the air expelled is cleaner than the air in your home.

Versatility is another hallmark of the Viking M0706VR. The vacuum comes with multiple attachments, including a crevice tool, dusting brush, and upholstery nozzle. These attachments allow for a thorough clean of various surfaces, from carpets and hardwood floors to furniture and tight corners.

One of the standout technologies in the M0706VR is its automatic cord rewind feature. This utility helps in quick and effortless storage, minimizing clutter and potential tripping hazards. Additionally, the vacuum's adjustable suction settings enable users to customize cleaning based on the surface type.

The M0706VR also showcases a quiet operation, allowing you to clean without disturbing others, making it suitable for both day and night use. Its durable construction ensures that it can withstand regular use, while its stylish design complements any home décor.

In conclusion, the Viking M0706VR is a versatile and efficient cleaning appliance that combines modern technology with practical features. Its advanced filtration system, lightweight design, and powerful suction make it an excellent investment for anyone seeking a reliable vacuum cleaner for their home.
Top Page Image Contents