Wolf W302210I Nameplate I N S TA L L AT I O N, Ro U B L E S H O O T I N G, YO U N E E D Service

Page 22

C O N TA C T

I N F O R M AT I O N

Wolf Customer Service:

800-332-9513

Website:

wolfappliance.com

W O L F PRO WALL VENTILATION H O O D S

NAMEPLATE I N S TA L L AT I O N

The Wolf logo nameplate does not come installed on the hood since there are various locations that the nameplate can be attached. Also, some customers prefer not to have a nameplate on their hood.

A template for positioning the Wolf logo nameplate in a standard location is included on the following page. Follow these steps to install the nameplate:

Decide on the location for the nameplate.

Clean the mounting area with rubbing alcohol.

If desired, cut out the template from the following page. Fold the template, locate placement on hood and tape to the hood surface. Check alignment and adjust if necessary.

T RO U B L E S H O O T I N G

IMPORTANT NOTE: If the Pro wall ventilation hood does not operate properly, follow these troubleshooting steps:

Verify that power is being supplied to the ventilation hood.

Check electrical connections to ensure that the installation has been completed correctly.

Refer to the Troubleshooting Guide in the Wolf Pro Ventilation Hoods Use & Care Information.

If the ventilation hood still does not work, contact a Wolf authorized service center. Do not attempt to repair the ventilation hood yourself. Wolf is not responsible for service required to correct a faulty installation.

Remove backing paper from the nameplate.

Position the nameplate in the template cut-out and press into place.

Remove the template and any tape residue.

I F YO U N E E D SERVICE

Maintain the quality built into your Pro wall ventilation hood by calling a Wolf authorized service center.

For the name and number of the Wolf authorized service center nearest you, check the Locator section of our website, wolfappliance.com, or call Wolf Customer

Service at 800-332-9513.

22

When calling for service, you will need the model and serial number of your ventilation hood. This information is found on the rating plate located on the left wall of the hood shell.

The information and images are the copyright property of Wolf Appliance Company, Inc., an affiliate of Sub-Zero Freezer Company, Inc.

Neither this book nor any information or images contained herein may be copied or used in whole or in part without the express written permission of Wolf Appliance Company, Inc., an affiliate of Sub-Zero Freezer Company, Inc.

©Wolf Appliance Company, Inc. all rights reserved.

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Installation Instructions Wolf Customer Service Website Wolfappliance.com N TA C T F O R M AT I O NS TA L L AT I O N R E Q U I R E M E N T S S T O F M AT E R I a L SE C T R I C a L R E Q U I R E M E N T S Installation C O N S I D E R AT I O N SC E S S O R I E S C T C O V E R6 1 0 D E E P WA L L H O O D S W- P R O F I L E WA L L H O O D S6 8 6 D E E P WA L L H O O D S Low-Profile 24 610 Deep Wall Hoods Installation S P E C I F I C AT I O N S27 686 Deep Wall Hoods 24 610 Deep Wall Hoods Model Low-Profile Wall Hoods Model27 686 Deep Wall Hoods Model To reduce the risk of fire, use only metal ductwork E P 1 I N S TA L L D U C T W O R KDucting options for low-profile wall hoods S TA L L AT I O N I N S T R U C T I O N S Ducting options for 24 610 deep wall hoodsE P 3 H O O D P R E PA R AT I O N Rough-in plate/transition assemblyE P 2 WA L L P R E PA R AT I O N If wall framing is not available, wall anchors must be usedWall cut-out for low-profile hoods horizontal discharge E P 4 R E AT TA C H R O U G H I N P L AT EWall cut-out for 24 610 deep hoods horizontal discharge E P 5 I N S TA L L T H E H O O D Hood installationM P L E T E T H E I N S TA L L AT I O N 27 686 Deep WA L L H O O D S Rough-in plate installation Mounting holes for 27 686 hoodsE P 4 I N S TA L L R O U G H I N P L AT E PRO Wall V E N T I L AT I O N H O O D S P O RTA N T N OT EE P 6 I N S TA L L W I R I N G Internal blower installation T E R N a L B L O W E R I N S TA L L AT I O NLine a N D Remote B L O W E R S Dimensions for BLOWER-60IL Dimensions for BLOWER-110ILO W E R I N S TA L L AT I O N Dimensions for BLOWER-150REM Dimensions for BLOWER-90REMDimensions for BLOWER-120REM O W E R W I R I N GL I N E B L O W E R S Blower a S S E M B L I E ST E R N a L B L O W E R S M OT E B L O W E R SDuct cover installation Filter and grease cup installationNameplate I N S TA L L AT I O N YO U N E E D ServiceRO U B L E S H O O T I N G Page 9 3 4 0 0
Top Page Image Contents