Breville JE98XL, the Juice FountainTM Plus manual PAgeTroubleshootingheader, When turned on

PAgeTroubleshootingheader.....

Possible problem	Easy solution
Machine will not work	• The safety locking arm may not be correctly engaged
when turned ON	in the vertical operating position with the locking arm
	located into the two grooves on either side of the juicer
	cover.
Motor appears to stall	• Wet pulp can build up under the juicer cover if the juicing
when juicing	action is too vigorous. Try slower juicing action by pushing
	the food pusher down slower. Follow Disassembling and
	Cleaning instructions and clean the filter bowl surround,
	the stainless steel filter basket and the juicer cover.
	• Hard fruit and vegetables will put excess strain onto the
	motor if a low speed is selected. Please refer to the juicing
	guide to determine the correct speed for the fruit and
	vegetables selected for juicing.
Excess pulp building	• Stop the juicing process and follow Disassembling
up in the stainless	instructions. Remove the juicer cover, scrape off pulp,
steel filter basket	reassemble and begin juicing again. Try alternating (soft
	and hard) vegetables and fruit varieties.
Pulp too wet and	• Try a slower juicing action. Remove the stainless steel filter
reduced extracted	basket and thoroughly clean mesh walls with a cleaning
juice	brush. Rinse the filter basket under hot water. If the fine
	mesh holes are blocked, soak the basket in a solution of hot
	water with 10% lemon juice to unblock the holes or wash
	in the dishwasher. This will remove excess fiber build up
	(from fruit and vegetables) which could be inhibiting the
	flow.
Juice leaks between	• Try a slower juicing speed and push the food pusher down
the rim of the juicer	the feed chute slower.
and the juicer cover
Juice sprays out	• The juice is being extracted too fast. Try a slower juicing
from spout	speed and push the food pusher down the feed chute
	slower.

22