CARE & CLEANING
7.The cleaning cycle will commence and last for approximately 5 minutes. During this time, water will intermittently pour from the group head. Once complete,
3 beeps will sound.
8.Remove the portafilter and ensure the tablet has completely dissolved. If the tablet has not dissolved, repeat until the tablet has dissolved.
DECALCIFYING
After regular use, hard water can cause mineral build up in and on many of the inner functioning components, reducing the brewing flow, brewing temperature, power of the machine, and taste of the espresso. We advise decalcifying the machine every month and especially if not using the machine for an extended period eg. before going on vacation.
1.Remove the portafilter.
2.Pour a 50/50 mixture of white vinegar and cold tap water into the water tank.
3.Place a large container beneath the group head and steam wand.
4.When the brewing temperature has been reached and all the button surrounds on the control panel
have illuminated, press and hold the
1 CUP button to commence a manual pour. Release the button once half the mixture of white vinegar and water has run through the group head.
5.Set the STEAM/HOT WATER dial to the hot water position and allow hot water to run through the hot water outlet for approximately
30 seconds. Return the dial back to the STANDBY position.
6.Set the STEAM/HOT WATER dial to the steam position and allow steam to run through the steam wand for approximately 2 minutes. Return the dial back to the STANDBY position.
7.If any of the mixture remains in the water tank, press and hold the 1 CUP button to commence a manual pour. Release the button once the tank is empty and nothing runs through the group head.
8.In harder water environments, we recommend repeating this cycle.
9.After decalcifying, remove the water tank and rinse thoroughly then refill with fresh cold water only. To rinse the machine, repeat the steps above.
WARNING
Do not immerse power cord, power plug or appliance in water or any other liquid. The water tank should never be removed or completely emptied during decalcifying.
CLEANING THE STEAM WAND
•Immediately after texturing milk, turn steam on to purge out any residual milk from the steam wand then wipe the wand with a damp cloth.
•If any of the holes in the tip of the steam wand become blocked, ensure the STEAM/ HOT WATER dial is in the STANDBY position. Press the POWER button to turn the machine Off and allow to cool. Use the pin on the end of the provided cleaning tool to unblock the hole(s).
•If the steam wand remains blocked, remove the tip using the integrated spanner in the cleaning tool and soak in hot water. Use the pin on the end of the provided cleaning tool to unblock the hole(s) before
CARE & CLEANING
CLEANING THE FILTER BASKETS AND PORTAFILTER
•The filter baskets and portafilter should be rinsed under hot water immediately after use to remove all residual coffee oils.
•If any of the holes in the filter basket become blocked, use the pin on the end of the provided cleaning tool to unblock the hole(s).
•If the hole(s) remain blocked, dissolve a cleaning tablet in hot water and soak filter basket and portafilter in solution for approx. 20 minutes. Rinse thoroughly.
CLEANING THE SHOWER SCREEN
•The group head interior and shower screen should be wiped with a damp cloth to remove any ground coffee particles.
•Periodically purge the machine. Place an empty filter basket and portfilter into the group head. Press and hold the 1 CUP button and run a short flow of water to rinse out any residual coffee.
CLEANING THE DRIP &
STORAGE TRAY
•The drip tray should be removed, emptied and cleaned after each use (after the auto purge feature, see page 17) or when the drip tray indicator is showing Empty Me!
•Remove grill from the drip tray. Wash both in warm soapy water. The Empty Me! indicator can also be removed from the drip tray.
•The storage tray can be removed and cleaned with a soft, damp cloth (do not use abrasive cleansers, pads or cloths which can scratch the surface).
CLEANING THE OUTER HOUSING & CUP WARMING TRAY
•The outer housing and cup warming tray can be cleaned with a soft, damp cloth. Polish with a soft, dry cloth. Do not use abrasive cleansers, pads or cloths which can scratch the surface.
NOTE
Do not use abrasive cleansers, pads or cloths which can scratch the surface. Do not clean any of the parts or accessories in the dishwasher.
26 |
| 27 |
|
|
|