PAGEOPERATINGHEADER.....
Under Extracted Zone
The gauge needle, when positioned in the lower zone during extraction, indicates the espresso has been extracted with insufficient pressure.
HOT WATER
•Turn the STEAM/HOT WATER dial to the hot water position.
•Hot water will pour from the hot water outlet and can be used for making Americanos and
•To stop the hot water, return the STEAM/HOT WATER dial to the STANDBY position.
STEAM | STANDBY | HOT WATER |
PAGEOPERATINGHEADER.....
AUTO PURGE
Immediately after the espresso, hot water and steam functions, the machine will purge water into the drip tray. This ensures the thermocoil is at the optimal temperature.
TIP
Ensure the drip tray is firmly pushed in place and emptied whenever the Empty Me! indicator is displayed.
SLEEP & AUTO OFF MODE
ADVANCED TEMPERATURE MODE
Different beans require a different water temperature to extract their optimum flavor. The Infuser™ allows you to adjust water temperature ±4°F in 2°F increments from the default temperature.
To enter Advanced Temperature Mode:
1. | Press the POWER button to switch |
| the machine off. |
2. | Press & hold the 1 CUP button, |
| then also press the POWER button. |
| The machine will beep once. The |
This occurs when the water flow through the ground coffee is too fast and results in an under extracted espresso that is watery and lacks crema and flavor.
Causes for under extraction include the grind being too coarse and/or insufficient coffee in the filter basket and/or under tamping.
Over Extracted Zone
The gauge needle, when positioned in the upper zone during extraction, indicates the espresso has been extracted with too much pressure.
This occurs when the water flow through the ground coffee is too slow and results in an over extracted espresso that is very dark and bitter with a mottled and uneven crema.
Causes for over extraction include the grind being too fine and/or too much ground
coffee in filter basket and/or over tamping.
The machine automatically switches to SLEEP MODE after 1 hour. During this time, the POWER button light will flash slowly. After 3 hours, the machine will switch to
AUTO OFF MODE.
To
illuminated button will indicate the |
current temperature selected. |
To adjust the water temperature, |
press the 2 CUP button to cycle |
through the temperature settings. |
Default Temperature setting:
Press the 2 CUP button until the POWER button illuminates.
Decrease Water Temperature
Press the 2 CUP button until the PROGRAM button illuminates.
Decrease Water Temperature
Increase Water Temperature +2˚F: Press the 2 CUP button until the HOT WATER/STEAM light illuminates.
Increase Water Temperature +4˚F: Press the 2 CUP button until the 1 CUP button illuminates.
The machine will beep twice to confirm the change. If no buttons are pressed within 10 seconds after entering Advanced Temperature Mode, no change will be made & the machine will return to STANDBY mode.
16 |
| 17 |
|
|
|