KitchenAid 2318581 Water Filtration System, Ice Maker and Storage Bin, On some models Accessory

Page 16

Water Filtration System

(on some models)

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.

Using the Dispenser Without the Water Filter Cartridge

You can run the dispenser without a water filter cartridge. Your water will not be filtered.

1.Remove the base grille water filter cartridge.

2.Slide the cartridge cap off the end of the filter cartridge. Do not discard the cap. With the cartridge cap in the horizontal position, insert the cap into the base grille until it stops.

Changing the Water Filter Cartridge

1.Locate the water filter cartridge cap in the front base grille. Rotate the cap counterclockwise to a vertical position and pull the cap and filter cartridge out through the base grille.

NOTE: There will be water in the cartridge. Some spilling may occur.

2.Remove the cartridge cap by sliding it off the end of the old cartridge. The cap will slide to the left or right. Do not discard the cap.

3.Take the new cartridge out of its packaging and remove protective cover from O-rings.

4.Slide the cartridge cap onto the new cartridge. See illustration in Step 2.

5.With cartridge cap in the vertical position, push the new filter cartridge into the base grille until it stops. Rotate the cartridge cap clockwise to a horizontal position. Flush the water system. See “Flushing the Water System After Replacing Filter.”

Flushing the Water System After Replacing Filter

Use a sturdy container to depress the water dispenser bar until the water begins to flow. Flush the water system by dispensing and discarding 1.5 gal. (5.4 L) of water. Cleaning the system will take approximately 3 minutes and will help clear air from the line. Additional flushing may be required in some households.

NOTE: As air is cleared from the system, water may spurt out of the dispenser.

Ice Maker and Storage Bin

(on some models - Accessory)

Style 1

To Turn the Ice Maker On/Off:

The On/Off switch for the ice maker is a wire shutoff arm located on the side of the ice maker.

1.To turn the ice maker on, simply lower the wire shutoff arm.

NOTE: Your ice maker has an automatic shutoff. As ice is made, the ice cubes will fill the ice storage bin and the ice cubes will raise the wire shutoff arm to the OFF (arm up) position.

2.To manually turn the ice maker off, lift the wire shutoff arm to the OFF (arm up) position and listen for the click to make sure the ice maker will not continue to operate.

To Remove and Replace Ice Storage Bin:

1.Pull the covering panel out from the bottom and then slide it back toward the rear.

2.Lift the wire shutoff arm so it clicks into the OFF (up) position. Ice can still be dispensed, but no more can be made.

3.Lift up the front of the storage bin and pull it out.

4.Replace the bin by pushing it in all the way or the dispenser will not work. Push the wire shutoff arm down to the ON position to restart ice production. Make sure the door is closed tightly.

Style 2

To Turn the Ice Maker On/Off:

The On/Off switch is located on the top right side of the freezer compartment.

1.To turn the ice maker on, slide the control to the ON (left) position.

NOTE: Your ice maker has an automatic shutoff. The ice maker sensors will automatically stop ice production, but the control will remain in the ON (left) position.

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Table of Contents/Table des matières Side by Side RefrigeratorTable DES Matières Refrigerator Safety Before You Throw Away Your Old Refrigerator or FreezerInstallation Instructions Clean Before UsingUnpack the Refrigerator Location RequirementsWater Supply Requirements Electrical RequirementsBase Grille Refrigerator Doors Adjustthe Doors Reconnect both ground wires Reconnect wiring plugRemove the Doors Replace the Doors and HingesConnectthe Water Supply Connect to Water LineConnect to Refrigerator Style 1 Connection to Water Valve Style 2 Connection to Water LineComplete the Installation Prepare the Water SystemStyle 3 Connection to Shut-off Valve StyleInstall Custom Wood Panels Factory Trim Kit on some modelsRemove the Door Panels Replace the Door PanelsDimensions for Routing Handle Sides of Door Panels End View Dimensions for Custom Wood PanelsNormal Sounds 25 cu. ft Freezer and Refrigerator DoorRefrigerator USE Usingthe ControlsEnsuring Proper Air Circulation Adjusting Electronic Controls Additional Electronic Control Panel FeaturesWater Filter Indicator Light and Reset Adjusting Digital ControlsWater and Ice Dispensers On some modelsWaterFilter Status Light Dispenser Light StyleDispenser Lock on some models Dispenser Control PanelWater Filtration System On some models AccessoryIce Maker and Storage Bin Refrigerator Features Clean the Ice Storage BinRefrigerator Shelves To Remove and Replace the Ice Storage BinConvertible Vegetable/Meat Drawer Temperature Control DeliDrawerConvertible Vegetable/MeatDrawer Crisper and Covers Crisper Humidity ControlFreezer Features Wine RackUtility Bin Freezer ShelfDoor Features Cleaning To Clean Your RefrigeratorRefrigerator Care Changing the Light BulbsPower Interruptions If You Choose to Turn the Refrigerator Off Before You Leave Vacation and Moving CareMoving Troubleshooting RefrigeratorOperationTemperature and Moisture Ice and WaterAssistance or Service TheU.S.AAccessories Stainless Steel Cleaner & PolishWater Filter Certifications CanadaApplication Guidelines/Water Supply Parameters Product Data Sheets33 100F 0.6 37.8C Kitchenaid Refrigerator Warranty ONE Year Limited WarrantyLifetime Limited Warranty on Door Bins and can Racks Items Kitchenaid will not PAY forPage Avant de jeter votre vieux réfrigérateur ou congélateur Sécurité DU RéfrigérateurEnlever les portes Instructions D’INSTALLATION Exigences demplacementDéballage du réfrigérateur Enlèvement des matériaux demballageSpécifications de l’alimentation en eau Spécifications électriquesGrille de la base Portesdu réfrigérateur Replacer les portes et les charnières Enlever les portesRaccordement delacanalisation deau Ajuster lesportesRaccordement à une canalisation d’eau Achever l’installation Préparerlesystème d’eauStyle 2 Connexion à la canalisation deau Style 3 Connexion au robinet darrêtRemplacement des panneaux de porte Ensemblesdécoratifsd’origineSur certains modèles Enlèvement des panneaux de la portePanneaux en relief Panneaux unisExigences de poids pour les encarts de panneaux en relief Utilisation des commandes Commandes à curseur sur certains modèlesUtilisation DU Réfrigérateur Sons normauxAjustement des commandes électroniques Ajustement des commandes à curseurCommandes électroniques sur certains modèles Autres caractéristiques du tableau de commande électroniqueCommandes numériques sur certains modèles Autres caractéristiques du tableau de commande numériqueAjustement des commandes numériques Max Cool refroidissement maximalDistributeurs d’eau et de glaçons La lumière distributeur Style Témoin lumineux de l’étatdu filtre à eauLe verrouillage du distributeur sur certains modèles Sur certains modèles -accessoire Remplacement de la cartouche de filtre à eauPurge du système d’eau après le remplacement du filtre Système de filtration d’eauPour retirer et réinstaller le bac à glaçons Style Mise en marche/arrêt de la machine à glaçonsPour enlever et replacer le bac à glaçons Entretien du bac d’entreposage de glaçonsTablettesdu réfrigérateur Caractéristiques DU RéfrigérateurTiroir pour spécialités alimentaires Sur certainsmodèles -Accessoire Réglage de l’humidité dansle bac à légumesCasieràvin Casier utilitaireCaractéristiques DU Congélateur Panier ou bac de congélateurTablette de congélateur Bacen plastiquesur certains modèlesCaractéristiques DE LA Porte Remplacement des ampoulesd’éclairage Entretien DU RéfrigérateurNettoyage Nettoyage du réfrigérateurLampe du tableau de commande du réfrigérateur Lampe de distributeur sur certains modèlesLampe du bac à légumes Style 2 En arrière du panier du congélateurEntretien avant les vacances ou lors ’un déménagement Pannes de courantDéménagement Dépannage Fonctionnement du réfrigérateurTempérature et humidité Glaçons et eauLe distributeur deau ne fonctionne pas correctement De leau suinte du distributeurLeau du distributeur nest pas assez froide Secondes après avoir relâché le levier du distributeurAssistance OU Service AccessoiresFeuilles DE Données SUR LE Produit 33 100F 0,6 37,8CGarantie Limitée DE UN AN Garantie DU Réfrigérateur KitchenaidKitchenaid NE Prendra PAS EN Charge 2318581 All rights reserved

2318581 specifications

The KitchenAid 2318581 is an innovative stand mixer attachment designed to enhance the functionality of KitchenAid stand mixers. This attachment is specifically engineered for users who want to broaden their culinary capabilities without investing in additional appliances. The 2318581 attachment brings several main features that cater to both casual cooks and professional chefs alike.

One of the standout characteristics of the KitchenAid 2318581 is its versatility. It is compatible with a wide range of KitchenAid stand mixer models, allowing users to easily connect it to their existing equipment. This means that home chefs can take advantage of the powerful motor and multiple speed settings of their stand mixer, making food preparation more efficient and enjoyable.

The design of the 2318581 attachment is also noteworthy. It is crafted from durable materials that ensure longevity and reliable performance over time. The sleek and modern aesthetic not only fits seamlessly into any kitchen décor but also provides ease of use in terms of attachment and detachment.

In terms of technology, the KitchenAid 2318581 offers a user-friendly interface. Its simple design allows for quick and hassle-free setup, ensuring that users can start creating delicious dishes with minimal delay. This attachment also features multiple operating speeds, providing precision control for various food processing needs, from mixing dough to making sauces and purees.

Another notable technology in this attachment is the integrated safety mechanism. It is designed to operate safely without risk of accidental disconnection while in use, ensuring that users can focus on their cooking without distractions or worries about equipment failure.

The KitchenAid 2318581 is ideal for those who want to streamline their cooking processes, reduce preparation time, and achieve consistent results every time. It transforms the stand mixer into a multifunctional kitchen tool, making it easier to experiment with new recipes and techniques.

In conclusion, the KitchenAid 2318581 is a must-have accessory for any KitchenAid stand mixer owner looking to elevate their culinary experience. With its robust features, advanced technologies, and thoughtful design, it stands out as an essential tool for both novice and experienced cooks alike.
Top Page Image Contents