KitchenAid 2318581 manual Door Features

Page 20

DOOR FEATURES

Your model may have some or all of these features. Features that can be purchased separately as product accessories are labeled with the word “Accessory.” Not all accessories will fit all models. If you are interested in purchasing one of the accessories, please call the toll-free number on the cover or in the “Accessories” section.

Tilt-out FreezerDoor Bin

(on some models)

To Remove and Replace the Bin:

1.Remove the bin by pulling out on the tabs behind the basket to release it from the door liner.

2.Replace the bin by aligning the tabs with the buttons on the sides of the door liner. Firmly snap the tabs onto the buttons as shown.

Drop-in DoorRails

To Remove and Replace the Rails:

1.Remove the rails by pulling straight up on each end of the rail.

2.Replace the rails by sliding the shelf rail into the slots on the door and pushing the rail straight down until it stops.

Can Racksand Door Bins

(on some models)

NOTE: Can racks may be purchased as an Accessory for some models.

To Remove and Replace the Racks/Bins:

1.Remove the rack/bin by lifting it and pulling it straight out.

2.Replace the rack/bin by sliding it in above the desired support and pushing it down until it stops.

Snap-on Freezer Door Bin

(on some models)

The door bin may be removed for easier cleaning.

To Remove and Replace the Bin:

1.Remove the door bin by pushing in slightly on the front of the bracket while pulling out on the inside tab. Repeat these steps for the other end of the door bin.

2.Replace the door bin by aligning the ends of the brackets with the buttons on the sides of the door liner. Firmly snap bracket and rail assembly onto the tabs above the shelf as shown.

DoorAir Control

The door air control is located on the left-hand side of the refrigerator compartment.

A

A. Door chill control

■Slide the door air control to the left to reduce the flow of cold air to the bin or can rack and make it less cold.

■Slide the door air control to the right to increase the flow of cold air to the bin or can rack and make it colder.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Table of Contents/Table des matières Side by Side RefrigeratorTable DES Matières Refrigerator Safety Before You Throw Away Your Old Refrigerator or FreezerInstallation Instructions Clean Before UsingUnpack the Refrigerator Location RequirementsBase Grille Electrical RequirementsWater Supply Requirements Refrigerator Doors Adjustthe Doors Reconnect both ground wires Reconnect wiring plugRemove the Doors Replace the Doors and HingesConnectthe Water Supply Connect to Water LineConnect to Refrigerator Style 1 Connection to Water Valve Style 2 Connection to Water LineComplete the Installation Prepare the Water SystemStyle 3 Connection to Shut-off Valve StyleInstall Custom Wood Panels Factory Trim Kit on some modelsRemove the Door Panels Replace the Door PanelsDimensions for Routing Handle Sides of Door Panels End View Dimensions for Custom Wood PanelsNormal Sounds 25 cu. ft Freezer and Refrigerator DoorEnsuring Proper Air Circulation Usingthe ControlsRefrigerator USE Adjusting Electronic Controls Additional Electronic Control Panel FeaturesWater Filter Indicator Light and Reset Adjusting Digital ControlsWater and Ice Dispensers On some modelsWaterFilter Status Light Dispenser Light StyleDispenser Lock on some models Dispenser Control PanelIce Maker and Storage Bin On some models AccessoryWater Filtration System Refrigerator Features Clean the Ice Storage BinRefrigerator Shelves To Remove and Replace the Ice Storage BinConvertible Vegetable/Meat Drawer Temperature Control DeliDrawerConvertible Vegetable/MeatDrawer Crisper and Covers Crisper Humidity ControlFreezer Features Wine RackUtility Bin Freezer ShelfDoor Features Cleaning To Clean Your RefrigeratorRefrigerator Care Changing the Light BulbsPower Interruptions Moving Vacation and Moving CareIf You Choose to Turn the Refrigerator Off Before You Leave Troubleshooting RefrigeratorOperationTemperature and Moisture Ice and WaterAssistance or Service TheU.S.AAccessories Stainless Steel Cleaner & PolishWater Filter Certifications Canada33 100F 0.6 37.8C Product Data SheetsApplication Guidelines/Water Supply Parameters Kitchenaid Refrigerator Warranty ONE Year Limited WarrantyLifetime Limited Warranty on Door Bins and can Racks Items Kitchenaid will not PAY forPage Enlever les portes Sécurité DU RéfrigérateurAvant de jeter votre vieux réfrigérateur ou congélateur Instructions D’INSTALLATION Exigences demplacementDéballage du réfrigérateur Enlèvement des matériaux demballageGrille de la base Spécifications électriquesSpécifications de l’alimentation en eau Portesdu réfrigérateur Replacer les portes et les charnières Enlever les portesRaccordement à une canalisation d’eau Ajuster lesportesRaccordement delacanalisation deau Achever l’installation Préparerlesystème d’eauStyle 2 Connexion à la canalisation deau Style 3 Connexion au robinet darrêtRemplacement des panneaux de porte Ensemblesdécoratifsd’origineSur certains modèles Enlèvement des panneaux de la porteExigences de poids pour les encarts de panneaux en relief Panneaux unisPanneaux en relief Utilisation des commandes Commandes à curseur sur certains modèlesUtilisation DU Réfrigérateur Sons normauxAjustement des commandes électroniques Ajustement des commandes à curseurCommandes électroniques sur certains modèles Autres caractéristiques du tableau de commande électroniqueCommandes numériques sur certains modèles Autres caractéristiques du tableau de commande numériqueAjustement des commandes numériques Max Cool refroidissement maximalDistributeurs d’eau et de glaçons Le verrouillage du distributeur sur certains modèles Témoin lumineux de l’étatdu filtre à eauLa lumière distributeur Style Sur certains modèles -accessoire Remplacement de la cartouche de filtre à eauPurge du système d’eau après le remplacement du filtre Système de filtration d’eauPour retirer et réinstaller le bac à glaçons Style Mise en marche/arrêt de la machine à glaçonsPour enlever et replacer le bac à glaçons Entretien du bac d’entreposage de glaçonsTiroir pour spécialités alimentaires Caractéristiques DU RéfrigérateurTablettesdu réfrigérateur Sur certainsmodèles -Accessoire Réglage de l’humidité dansle bac à légumesCasieràvin Casier utilitaireCaractéristiques DU Congélateur Panier ou bac de congélateurTablette de congélateur Bacen plastiquesur certains modèlesCaractéristiques DE LA Porte Remplacement des ampoulesd’éclairage Entretien DU RéfrigérateurNettoyage Nettoyage du réfrigérateurLampe du tableau de commande du réfrigérateur Lampe de distributeur sur certains modèlesLampe du bac à légumes Style 2 En arrière du panier du congélateurDéménagement Pannes de courantEntretien avant les vacances ou lors ’un déménagement Dépannage Fonctionnement du réfrigérateurTempérature et humidité Glaçons et eauLe distributeur deau ne fonctionne pas correctement De leau suinte du distributeurLeau du distributeur nest pas assez froide Secondes après avoir relâché le levier du distributeurAssistance OU Service AccessoiresFeuilles DE Données SUR LE Produit 33 100F 0,6 37,8CKitchenaid NE Prendra PAS EN Charge Garantie DU Réfrigérateur KitchenaidGarantie Limitée DE UN AN 2318581 All rights reserved

2318581 specifications

The KitchenAid 2318581 is an innovative stand mixer attachment designed to enhance the functionality of KitchenAid stand mixers. This attachment is specifically engineered for users who want to broaden their culinary capabilities without investing in additional appliances. The 2318581 attachment brings several main features that cater to both casual cooks and professional chefs alike.

One of the standout characteristics of the KitchenAid 2318581 is its versatility. It is compatible with a wide range of KitchenAid stand mixer models, allowing users to easily connect it to their existing equipment. This means that home chefs can take advantage of the powerful motor and multiple speed settings of their stand mixer, making food preparation more efficient and enjoyable.

The design of the 2318581 attachment is also noteworthy. It is crafted from durable materials that ensure longevity and reliable performance over time. The sleek and modern aesthetic not only fits seamlessly into any kitchen décor but also provides ease of use in terms of attachment and detachment.

In terms of technology, the KitchenAid 2318581 offers a user-friendly interface. Its simple design allows for quick and hassle-free setup, ensuring that users can start creating delicious dishes with minimal delay. This attachment also features multiple operating speeds, providing precision control for various food processing needs, from mixing dough to making sauces and purees.

Another notable technology in this attachment is the integrated safety mechanism. It is designed to operate safely without risk of accidental disconnection while in use, ensuring that users can focus on their cooking without distractions or worries about equipment failure.

The KitchenAid 2318581 is ideal for those who want to streamline their cooking processes, reduce preparation time, and achieve consistent results every time. It transforms the stand mixer into a multifunctional kitchen tool, making it easier to experiment with new recipes and techniques.

In conclusion, the KitchenAid 2318581 is a must-have accessory for any KitchenAid stand mixer owner looking to elevate their culinary experience. With its robust features, advanced technologies, and thoughtful design, it stands out as an essential tool for both novice and experienced cooks alike.
Top Page Image Contents