KitchenAid 2318581 manual DeliDrawer, Convertible Vegetable/MeatDrawer Crisper and Covers

Page 18

DeliDrawer

(on some models)

The deli drawer stores raisins, nuts, spreads, and other small items at normal refrigerator temperatures.

To Remove and Replace the Deli Drawer:

1.Remove the deli drawer by sliding it straight out to the stop. Lift the front and slide the drawer out the rest of the way.

2.Replace the deli drawer by sliding it back past the stop.

Convertible Vegetable/MeatDrawer,

Crisper and Covers

(on some models)

Crisper and Convertible Vegetable Meat Drawers

To Remove and Replace Drawers:

1.Slide crisper or meat drawer straight out to the stop. Lift the front of drawer with one hand while supporting the bottom of drawer with other hand and slide the drawer out the rest of the way.

2.Replace the crisper or meat drawer by sliding it back in fully past the drawer stop.

Adjusting the Control

The convertible control comes preset at the lowest meat setting.

To change a control setting: Move the control to the right (colder) or to the left (less cold) as desired.

To store vegetables: Set the control to VEG (all the way to the left) to store vegetables at their optimal storage temperatures (which need to be warmer than those for meat).

IMPORTANT: If food starts to freeze, move the control to the left (less cold). Remember to wait 24 hours between adjustments. Doing so gives the temperature of the food time to change.

Meat Storage Guide

Store most meat in original wrapping as long as it is airtight and moisture-proof. Rewrap if necessary. See the following chart for storage times. When storing meat longer than the times given, freeze the meat.

Fresh fish or shellfish

use same day as purchased

Chicken, ground beef, variety meat (liver, etc.)

.........1-2 days

Cold cuts, steaks/roasts

3-5 days

Cured meats

7-10 days

Leftovers - Cover leftovers with plastic wrap, aluminum foil, or plastic containers with tight lids.

Crisper or Vegetable/Meat Drawer Covers

To Remove and Replace Covers:

1.Remove the crisper and meat drawer. Press up in center of crisper glass insert until it rises above the plastic frame. Holding the crisper glass firmly, slowly slide the glass insert forward to remove.

2.Lift crisper cover frame and remove. Repeat steps to remove the meat drawer cover.

3.Replace back of meat drawer cover frame into supports or slides on side walls of the refrigerator and lower or slide the front of the cover frame into place.

4.Slide rear of glass insert into cover frame and lower front into place. Repeat steps to replace the crisper cover.

Convertible Vegetable/Meat Drawer

Temperature Control

The convertible vegetable/meat drawer can be adjusted to properly chill meats or vegetables. The air inside the pan is cooled to prevent “spot” freezing and can be set to keep meats at the National Livestock and Meat Board recommended storage temperatures of 28° to 32°F (-2° to 0°C).

IMPORTANT: To extend freshness, wrap meats in airtight, moisture-proof materials before storing. Always store meat as recommended.

Crisper Humidity Control

(on some models)

The Crisper Humidity control is located on the crisper cover. You can control the amount of humidity in the moisture-sealed crisper. Adjust the control to any setting between LOW and HIGH.

LOW (open) lets moist air out of the crisper for best storage of fruits and vegetables with skins.

Fruit: Wash, let dry and store in refrigerator in plastic bag or crisper. Do not wash or hull berries until they are ready to use. Sort and keep berries in original container in crisper, or store in a loosely closed paper bag on a refrigerator shelf.

Vegetables with skins: Place in plastic bag or plastic container and store in crisper.

HIGH (closed) keeps moist air in the crisper for best storage of fresh, leafy vegetables.

Leafy vegetables: Wash in cold water, drain and trim or tear off bruised and discolored areas. Place in plastic bag or plastic container and store in crisper.

18

Image 18
Contents Table of Contents/Table des matières Side by Side RefrigeratorTable DES Matières Refrigerator Safety Before You Throw Away Your Old Refrigerator or FreezerUnpack the Refrigerator Installation InstructionsClean Before Using Location RequirementsElectrical Requirements Water Supply RequirementsBase Grille Refrigerator Doors Remove the Doors Adjustthe DoorsReconnect both ground wires Reconnect wiring plug Replace the Doors and HingesConnect to Refrigerator Style 1 Connection to Water Valve Connectthe Water SupplyConnect to Water Line Style 2 Connection to Water LineStyle 3 Connection to Shut-off Valve Complete the InstallationPrepare the Water System StyleRemove the Door Panels Install Custom Wood PanelsFactory Trim Kit on some models Replace the Door PanelsNormal Sounds Dimensions for Routing Handle Sides of Door Panels End ViewDimensions for Custom Wood Panels 25 cu. ft Freezer and Refrigerator DoorUsingthe Controls Refrigerator USEEnsuring Proper Air Circulation Water Filter Indicator Light and Reset Adjusting Electronic ControlsAdditional Electronic Control Panel Features Adjusting Digital ControlsWater and Ice Dispensers On some modelsDispenser Lock on some models WaterFilter Status LightDispenser Light Style Dispenser Control PanelOn some models Accessory Water Filtration SystemIce Maker and Storage Bin Refrigerator Shelves Refrigerator FeaturesClean the Ice Storage Bin To Remove and Replace the Ice Storage BinConvertible Vegetable/MeatDrawer Crisper and Covers Convertible Vegetable/Meat Drawer Temperature ControlDeliDrawer Crisper Humidity ControlUtility Bin Freezer FeaturesWine Rack Freezer ShelfDoor Features Refrigerator Care CleaningTo Clean Your Refrigerator Changing the Light BulbsPower Interruptions Vacation and Moving Care If You Choose to Turn the Refrigerator Off Before You LeaveMoving Troubleshooting RefrigeratorOperationTemperature and Moisture Ice and WaterAssistance or Service TheU.S.AWater Filter Certifications AccessoriesStainless Steel Cleaner & Polish CanadaProduct Data Sheets Application Guidelines/Water Supply Parameters33 100F 0.6 37.8C Lifetime Limited Warranty on Door Bins and can Racks Kitchenaid Refrigerator WarrantyONE Year Limited Warranty Items Kitchenaid will not PAY forPage Sécurité DU Réfrigérateur Avant de jeter votre vieux réfrigérateur ou congélateurEnlever les portes Déballage du réfrigérateur Instructions D’INSTALLATIONExigences demplacement Enlèvement des matériaux demballageSpécifications électriques Spécifications de l’alimentation en eauGrille de la base Portesdu réfrigérateur Replacer les portes et les charnières Enlever les portesAjuster lesportes Raccordement delacanalisation deauRaccordement à une canalisation d’eau Style 2 Connexion à la canalisation deau Achever l’installationPréparerlesystème d’eau Style 3 Connexion au robinet darrêtSur certains modèles Remplacement des panneaux de porteEnsemblesdécoratifsd’origine Enlèvement des panneaux de la portePanneaux unis Panneaux en reliefExigences de poids pour les encarts de panneaux en relief Utilisation DU Réfrigérateur Utilisation des commandesCommandes à curseur sur certains modèles Sons normauxCommandes électroniques sur certains modèles Ajustement des commandes électroniquesAjustement des commandes à curseur Autres caractéristiques du tableau de commande électroniqueAjustement des commandes numériques Commandes numériques sur certains modèlesAutres caractéristiques du tableau de commande numérique Max Cool refroidissement maximalDistributeurs d’eau et de glaçons Témoin lumineux de l’étatdu filtre à eau La lumière distributeur StyleLe verrouillage du distributeur sur certains modèles Purge du système d’eau après le remplacement du filtre Sur certains modèles -accessoireRemplacement de la cartouche de filtre à eau Système de filtration d’eauPour enlever et replacer le bac à glaçons Pour retirer et réinstaller le bac à glaçonsStyle Mise en marche/arrêt de la machine à glaçons Entretien du bac d’entreposage de glaçonsCaractéristiques DU Réfrigérateur Tablettesdu réfrigérateurTiroir pour spécialités alimentaires Casieràvin Sur certainsmodèles -AccessoireRéglage de l’humidité dansle bac à légumes Casier utilitaireTablette de congélateur Caractéristiques DU CongélateurPanier ou bac de congélateur Bacen plastiquesur certains modèlesCaractéristiques DE LA Porte Nettoyage Remplacement des ampoulesd’éclairageEntretien DU Réfrigérateur Nettoyage du réfrigérateurLampe du bac à légumes Lampe du tableau de commande du réfrigérateurLampe de distributeur sur certains modèles Style 2 En arrière du panier du congélateurPannes de courant Entretien avant les vacances ou lors ’un déménagementDéménagement Dépannage Fonctionnement du réfrigérateurTempérature et humidité Glaçons et eauLeau du distributeur nest pas assez froide Le distributeur deau ne fonctionne pas correctementDe leau suinte du distributeur Secondes après avoir relâché le levier du distributeurAssistance OU Service AccessoiresFeuilles DE Données SUR LE Produit 33 100F 0,6 37,8CGarantie DU Réfrigérateur Kitchenaid Garantie Limitée DE UN ANKitchenaid NE Prendra PAS EN Charge 2318581 All rights reserved

2318581 specifications

The KitchenAid 2318581 is an innovative stand mixer attachment designed to enhance the functionality of KitchenAid stand mixers. This attachment is specifically engineered for users who want to broaden their culinary capabilities without investing in additional appliances. The 2318581 attachment brings several main features that cater to both casual cooks and professional chefs alike.

One of the standout characteristics of the KitchenAid 2318581 is its versatility. It is compatible with a wide range of KitchenAid stand mixer models, allowing users to easily connect it to their existing equipment. This means that home chefs can take advantage of the powerful motor and multiple speed settings of their stand mixer, making food preparation more efficient and enjoyable.

The design of the 2318581 attachment is also noteworthy. It is crafted from durable materials that ensure longevity and reliable performance over time. The sleek and modern aesthetic not only fits seamlessly into any kitchen décor but also provides ease of use in terms of attachment and detachment.

In terms of technology, the KitchenAid 2318581 offers a user-friendly interface. Its simple design allows for quick and hassle-free setup, ensuring that users can start creating delicious dishes with minimal delay. This attachment also features multiple operating speeds, providing precision control for various food processing needs, from mixing dough to making sauces and purees.

Another notable technology in this attachment is the integrated safety mechanism. It is designed to operate safely without risk of accidental disconnection while in use, ensuring that users can focus on their cooking without distractions or worries about equipment failure.

The KitchenAid 2318581 is ideal for those who want to streamline their cooking processes, reduce preparation time, and achieve consistent results every time. It transforms the stand mixer into a multifunctional kitchen tool, making it easier to experiment with new recipes and techniques.

In conclusion, the KitchenAid 2318581 is a must-have accessory for any KitchenAid stand mixer owner looking to elevate their culinary experience. With its robust features, advanced technologies, and thoughtful design, it stands out as an essential tool for both novice and experienced cooks alike.