KitchenAid 2318581 manual Adjustthe Doors, Remove the Doors, Replace the Doors and Hinges

Page 7

Remove the Doors

WARNING

Electrical Shock Hazard

Disconnect power before removing doors.

Failure to do so can result in death or electrical shock.

1.Unplug refrigerator or disconnect power.

2.Open both refrigerator doors. Remove the base grille by pulling up on the bottom outside corners. See Graphic 1.

3.Close both doors and keep them closed until you are ready to lift them free from the cabinet.

4.If you have a dispenser (ice or water), disconnect the water dispenser tubing located behind the base grille on the freezer door side. See Graphic 2.

■Press the red outer ring against the face of fitting and pull the dispenser tubing free.

■On some models, remove tubing from hose clip.

5.Remove top left hinge screw and cover as shown in Graphic 3.

6.Disconnect wiring plug and both ground wires from the ground wire screw (on some models) as shown in Graphic 3.

7.Remove remaining left hinge screws and hinge as shown in Graphic 3. Do not remove screw A.

8.Lift freezer door straight up off bottom hinge. See Graphic 4. The water dispenser tubing remains attached to the freezer door and pulls through the bottom left hinge. Make sure you protect the dispenser tubing from damage.

9.Remove top right hinge cover and screws as shown in Graphic 5. Do not remove screw A.

10.Lift the refrigerator door straight up off bottom hinge.

11.It may not be necessary to remove the bottom hinge to move the refrigerator through a doorway. Both bottom hinges have similar construction.

■Disassemble the hinges as shown in Graphic 6. Do not remove screw A.

Replace the Doors and Hinges

1.Replace both bottom hinges, if removed. Tighten screws.

2.Assistance may be needed to feed the water dispenser tubing through the bottom hinge while reinstalling the freezer door. Feed the dispenser tubing through the bottom left hinge before replacing the door on the hinge.

NOTE: Provide additional support for the doors while the top hinges are being replaced. Do not depend on the door magnets to hold the doors in place while you are working.

3.Reconnect water dispenser tubing by pushing tubing into fitting until it stops and black mark touches the face of the red outer ring. See Graphic 2. On some models, replace tubing in hose clip.

4.Align and replace the top left hinge as shown in Graphic 3. Tighten screws.

WARNING

Electrical Shock Hazard

Reconnect both ground wires.

Failure to do so can result in death or electrical shock.

Style 1

■Reconnect both ground wires.

■Reconnect wiring plug.

C

D

A

B

A. Do not remove screw A

B. Ground wires

C. Green ground wire screw

D. Wiring plug

Style 2

■ Reconnect wiring plug.

5.Replace left hinge cover and screws.

6.Replace the refrigerator door by lifting the door onto the bottom right hinge.

7.Align and replace the top right hinge as shown in Graphic 5. Tighten screws.

8.Replace hinge cover and screws. Tighten screws.

9.Plug into a grounded 3 prong outlet.

Adjustthe Doors

Your refrigerator has two front adjustable rollers — one on the right and one on the left. If your refrigerator seems unsteady or if you want the doors to close more easily, adjust the refrigerator's tilt using the instructions below.

1.Move the refrigerator into its final location.

2.The two leveling screws are part of the front roller assemblies which are at the base of the refrigerator on either side. See Graphic 7.

3.Use a hex-head socket wrench to adjust the leveling screws. Turn the leveling screw to the right to raise that side of the refrigerator or turn the leveling screw to the left to lower that side. It may take several turns of the leveling screws to adjust the tilt of the refrigerator. See Graphic 7.

NOTE: Having someone push against the top of the refrigerator takes some weight off the leveling screws and rollers. This makes it easier to adjust the screws.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Side by Side Refrigerator Table of Contents/Table des matièresTable DES Matières Before You Throw Away Your Old Refrigerator or Freezer Refrigerator SafetyLocation Requirements Installation InstructionsClean Before Using Unpack the RefrigeratorWater Supply Requirements Electrical RequirementsBase Grille Refrigerator Doors Replace the Doors and Hinges Adjustthe DoorsReconnect both ground wires Reconnect wiring plug Remove the DoorsStyle 2 Connection to Water Line Connectthe Water SupplyConnect to Water Line Connect to Refrigerator Style 1 Connection to Water ValveStyle Complete the InstallationPrepare the Water System Style 3 Connection to Shut-off ValveReplace the Door Panels Install Custom Wood PanelsFactory Trim Kit on some models Remove the Door Panels25 cu. ft Freezer and Refrigerator Door Dimensions for Routing Handle Sides of Door Panels End ViewDimensions for Custom Wood Panels Normal SoundsRefrigerator USE Usingthe ControlsEnsuring Proper Air Circulation Adjusting Digital Controls Adjusting Electronic ControlsAdditional Electronic Control Panel Features Water Filter Indicator Light and ResetOn some models Water and Ice DispensersDispenser Control Panel WaterFilter Status LightDispenser Light Style Dispenser Lock on some modelsWater Filtration System On some models AccessoryIce Maker and Storage Bin To Remove and Replace the Ice Storage Bin Refrigerator FeaturesClean the Ice Storage Bin Refrigerator ShelvesCrisper Humidity Control Convertible Vegetable/Meat Drawer Temperature ControlDeliDrawer Convertible Vegetable/MeatDrawer Crisper and CoversFreezer Shelf Freezer FeaturesWine Rack Utility BinDoor Features Changing the Light Bulbs CleaningTo Clean Your Refrigerator Refrigerator CarePower Interruptions If You Choose to Turn the Refrigerator Off Before You Leave Vacation and Moving CareMoving RefrigeratorOperation TroubleshootingIce and Water Temperature and MoistureTheU.S.A Assistance or ServiceCanada AccessoriesStainless Steel Cleaner & Polish Water Filter CertificationsApplication Guidelines/Water Supply Parameters Product Data Sheets33 100F 0.6 37.8C Items Kitchenaid will not PAY for Kitchenaid Refrigerator WarrantyONE Year Limited Warranty Lifetime Limited Warranty on Door Bins and can RacksPage Avant de jeter votre vieux réfrigérateur ou congélateur Sécurité DU RéfrigérateurEnlever les portes Enlèvement des matériaux demballage Instructions D’INSTALLATIONExigences demplacement Déballage du réfrigérateurSpécifications de l’alimentation en eau Spécifications électriquesGrille de la base Portesdu réfrigérateur Enlever les portes Replacer les portes et les charnièresRaccordement delacanalisation deau Ajuster lesportesRaccordement à une canalisation d’eau Style 3 Connexion au robinet darrêt Achever l’installationPréparerlesystème d’eau Style 2 Connexion à la canalisation deauEnlèvement des panneaux de la porte Remplacement des panneaux de porteEnsemblesdécoratifsd’origine Sur certains modèlesPanneaux en relief Panneaux unisExigences de poids pour les encarts de panneaux en relief Sons normaux Utilisation des commandesCommandes à curseur sur certains modèles Utilisation DU RéfrigérateurAutres caractéristiques du tableau de commande électronique Ajustement des commandes électroniquesAjustement des commandes à curseur Commandes électroniques sur certains modèlesMax Cool refroidissement maximal Commandes numériques sur certains modèlesAutres caractéristiques du tableau de commande numérique Ajustement des commandes numériquesDistributeurs d’eau et de glaçons La lumière distributeur Style Témoin lumineux de l’étatdu filtre à eauLe verrouillage du distributeur sur certains modèles Système de filtration d’eau Sur certains modèles -accessoireRemplacement de la cartouche de filtre à eau Purge du système d’eau après le remplacement du filtreEntretien du bac d’entreposage de glaçons Pour retirer et réinstaller le bac à glaçonsStyle Mise en marche/arrêt de la machine à glaçons Pour enlever et replacer le bac à glaçonsTablettesdu réfrigérateur Caractéristiques DU RéfrigérateurTiroir pour spécialités alimentaires Casier utilitaire Sur certainsmodèles -AccessoireRéglage de l’humidité dansle bac à légumes CasieràvinBacen plastiquesur certains modèles Caractéristiques DU CongélateurPanier ou bac de congélateur Tablette de congélateurCaractéristiques DE LA Porte Nettoyage du réfrigérateur Remplacement des ampoulesd’éclairageEntretien DU Réfrigérateur NettoyageStyle 2 En arrière du panier du congélateur Lampe du tableau de commande du réfrigérateurLampe de distributeur sur certains modèles Lampe du bac à légumesEntretien avant les vacances ou lors ’un déménagement Pannes de courantDéménagement Fonctionnement du réfrigérateur DépannageGlaçons et eau Température et humiditéSecondes après avoir relâché le levier du distributeur Le distributeur deau ne fonctionne pas correctementDe leau suinte du distributeur Leau du distributeur nest pas assez froideAccessoires Assistance OU Service33 100F 0,6 37,8C Feuilles DE Données SUR LE ProduitGarantie Limitée DE UN AN Garantie DU Réfrigérateur KitchenaidKitchenaid NE Prendra PAS EN Charge All rights reserved 2318581

2318581 specifications

The KitchenAid 2318581 is an innovative stand mixer attachment designed to enhance the functionality of KitchenAid stand mixers. This attachment is specifically engineered for users who want to broaden their culinary capabilities without investing in additional appliances. The 2318581 attachment brings several main features that cater to both casual cooks and professional chefs alike.

One of the standout characteristics of the KitchenAid 2318581 is its versatility. It is compatible with a wide range of KitchenAid stand mixer models, allowing users to easily connect it to their existing equipment. This means that home chefs can take advantage of the powerful motor and multiple speed settings of their stand mixer, making food preparation more efficient and enjoyable.

The design of the 2318581 attachment is also noteworthy. It is crafted from durable materials that ensure longevity and reliable performance over time. The sleek and modern aesthetic not only fits seamlessly into any kitchen décor but also provides ease of use in terms of attachment and detachment.

In terms of technology, the KitchenAid 2318581 offers a user-friendly interface. Its simple design allows for quick and hassle-free setup, ensuring that users can start creating delicious dishes with minimal delay. This attachment also features multiple operating speeds, providing precision control for various food processing needs, from mixing dough to making sauces and purees.

Another notable technology in this attachment is the integrated safety mechanism. It is designed to operate safely without risk of accidental disconnection while in use, ensuring that users can focus on their cooking without distractions or worries about equipment failure.

The KitchenAid 2318581 is ideal for those who want to streamline their cooking processes, reduce preparation time, and achieve consistent results every time. It transforms the stand mixer into a multifunctional kitchen tool, making it easier to experiment with new recipes and techniques.

In conclusion, the KitchenAid 2318581 is a must-have accessory for any KitchenAid stand mixer owner looking to elevate their culinary experience. With its robust features, advanced technologies, and thoughtful design, it stands out as an essential tool for both novice and experienced cooks alike.
Top Page Image Contents