KitchenAid 2318581 manual Electrical Requirements, Water Supply Requirements, Base Grille

Page 5

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before you move your refrigerator into its final location, it is important to make sure you have the proper electrical connection.

Recommended Grounding Method

A 115 Volt, 60 Hz., AC only 15- or 20-amp fused, grounded electrical supply is required. It is recommended that a separate circuit serving only your refrigerator be provided. Use an outlet that cannot be turned off by a switch. Do not use an extension cord.

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the control (Thermostat, Refrigerator or Freezer Control depending on the model) OFF and then disconnect the refrigerator from the electrical source. When you are finished, reconnect the refrigerator to the electrical source and reset the control (Thermostat, Refrigerator or Freezer Control depending on the model) to the desired setting.

Water Supply Requirements

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

TOOLS NEEDED:

■

Flat-blade screwdriver

■

¹⁄₄" Drill bit

■

⁷⁄₁₆" and ¹⁄₂" Open-end or two

■

Hand drill or electric drill

 

adjustable wrenches

 

(properly grounded)

■¹⁄₄" nut driver

NOTE: Your refrigerator dealer has a kit available with a ¹⁄₄"

(6.35 mm) saddle-type shutoff valve, a union, and copper tubing. Before purchasing, make sure a saddle-type valve complies with your local plumbing codes. Do not use a piercing-type or ³⁄₁₆"

(4.76 mm) saddle valve which reduces water flow and clogs more easily.

IMPORTANT:

■All installations must meet local plumbing code requirements.

■Use copper tubing and check for leaks. Install copper tubing only in areas where the household temperatures will remain above freezing.

Water Pressure

A cold water supply with water pressure of between 30 and 120 psi (207 and 827 kPa) is required to operate the water dispenser and ice maker. If you have questions about your water pressure, call a licensed, qualified plumber.

Reverse Osmosis Water Supply

IMPORTANT: The pressure of the water supply coming out of a reverse osmosis system going to the water inlet valve of the refrigerator needs to be between 30 and 120 psi (207 and

827 kPa).

If a reverse osmosis water filtration system is connected to your cold water supply, the water pressure to the reverse osmosis system needs to be a minimum of 40 to 60 psi (276 to 414 kPa).

If the water pressure to the reverse osmosis system is less than

40 to 60 psi (276 to 414 kPa):

■Check to see whether the sediment filter in the reverse osmosis system is blocked. Replace the filter if necessary.

■Allow the storage tank on the reverse osmosis system to refill after heavy usage.

■If your refrigerator has a water filter, it may further reduce the water pressure when used in conjunction with a reverse osmosis system. Remove the water filter. See “Water Filtration System.”

If you have questions about your water pressure, call a licensed, qualified plumber.

Base Grille

Remove the Base Grille:

1.Open both doors.

2.Place hands along the ends of the grille. Push in on the top of the base grille and pull up on the bottom.

NOTE: Be sure to refasten the Tech Sheet behind the base grille after cleaning.

Replace the Base Grille:

1.Open both doors.

2.Line up the grille support tabs with the metal clips.

3.Push the grille firmly to snap it into place.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Side by Side Refrigerator Table of Contents/Table des matièresTable DES Matières Before You Throw Away Your Old Refrigerator or Freezer Refrigerator SafetyClean Before Using Installation InstructionsUnpack the Refrigerator Location RequirementsBase Grille Electrical RequirementsWater Supply Requirements Refrigerator Doors Reconnect both ground wires Reconnect wiring plug Adjustthe DoorsRemove the Doors Replace the Doors and HingesConnect to Water Line Connectthe Water SupplyConnect to Refrigerator Style 1 Connection to Water Valve Style 2 Connection to Water LinePrepare the Water System Complete the InstallationStyle 3 Connection to Shut-off Valve StyleFactory Trim Kit on some models Install Custom Wood PanelsRemove the Door Panels Replace the Door PanelsDimensions for Custom Wood Panels Dimensions for Routing Handle Sides of Door Panels End ViewNormal Sounds 25 cu. ft Freezer and Refrigerator DoorEnsuring Proper Air Circulation Usingthe ControlsRefrigerator USE Additional Electronic Control Panel Features Adjusting Electronic ControlsWater Filter Indicator Light and Reset Adjusting Digital ControlsOn some models Water and Ice DispensersDispenser Light Style WaterFilter Status LightDispenser Lock on some models Dispenser Control PanelIce Maker and Storage Bin On some models AccessoryWater Filtration System Clean the Ice Storage Bin Refrigerator FeaturesRefrigerator Shelves To Remove and Replace the Ice Storage BinDeliDrawer Convertible Vegetable/Meat Drawer Temperature ControlConvertible Vegetable/MeatDrawer Crisper and Covers Crisper Humidity ControlWine Rack Freezer FeaturesUtility Bin Freezer ShelfDoor Features To Clean Your Refrigerator CleaningRefrigerator Care Changing the Light BulbsPower Interruptions Moving Vacation and Moving CareIf You Choose to Turn the Refrigerator Off Before You Leave RefrigeratorOperation TroubleshootingIce and Water Temperature and MoistureTheU.S.A Assistance or ServiceStainless Steel Cleaner & Polish AccessoriesWater Filter Certifications Canada33 100F 0.6 37.8C Product Data SheetsApplication Guidelines/Water Supply Parameters ONE Year Limited Warranty Kitchenaid Refrigerator WarrantyLifetime Limited Warranty on Door Bins and can Racks Items Kitchenaid will not PAY forPage Enlever les portes Sécurité DU RéfrigérateurAvant de jeter votre vieux réfrigérateur ou congélateur Exigences demplacement Instructions D’INSTALLATIONDéballage du réfrigérateur Enlèvement des matériaux demballageGrille de la base Spécifications électriquesSpécifications de l’alimentation en eau Portesdu réfrigérateur Enlever les portes Replacer les portes et les charnièresRaccordement à une canalisation d’eau Ajuster lesportesRaccordement delacanalisation deau Préparerlesystème d’eau Achever l’installationStyle 2 Connexion à la canalisation deau Style 3 Connexion au robinet darrêtEnsemblesdécoratifsd’origine Remplacement des panneaux de porteSur certains modèles Enlèvement des panneaux de la porteExigences de poids pour les encarts de panneaux en relief Panneaux unisPanneaux en relief Commandes à curseur sur certains modèles Utilisation des commandesUtilisation DU Réfrigérateur Sons normauxAjustement des commandes à curseur Ajustement des commandes électroniquesCommandes électroniques sur certains modèles Autres caractéristiques du tableau de commande électroniqueAutres caractéristiques du tableau de commande numérique Commandes numériques sur certains modèlesAjustement des commandes numériques Max Cool refroidissement maximalDistributeurs d’eau et de glaçons Le verrouillage du distributeur sur certains modèles Témoin lumineux de l’étatdu filtre à eauLa lumière distributeur Style Remplacement de la cartouche de filtre à eau Sur certains modèles -accessoirePurge du système d’eau après le remplacement du filtre Système de filtration d’eauStyle Mise en marche/arrêt de la machine à glaçons Pour retirer et réinstaller le bac à glaçonsPour enlever et replacer le bac à glaçons Entretien du bac d’entreposage de glaçonsTiroir pour spécialités alimentaires Caractéristiques DU RéfrigérateurTablettesdu réfrigérateur Réglage de l’humidité dansle bac à légumes Sur certainsmodèles -AccessoireCasieràvin Casier utilitairePanier ou bac de congélateur Caractéristiques DU CongélateurTablette de congélateur Bacen plastiquesur certains modèlesCaractéristiques DE LA Porte Entretien DU Réfrigérateur Remplacement des ampoulesd’éclairageNettoyage Nettoyage du réfrigérateurLampe de distributeur sur certains modèles Lampe du tableau de commande du réfrigérateurLampe du bac à légumes Style 2 En arrière du panier du congélateurDéménagement Pannes de courantEntretien avant les vacances ou lors ’un déménagement Fonctionnement du réfrigérateur DépannageGlaçons et eau Température et humiditéDe leau suinte du distributeur Le distributeur deau ne fonctionne pas correctementLeau du distributeur nest pas assez froide Secondes après avoir relâché le levier du distributeurAccessoires Assistance OU Service33 100F 0,6 37,8C Feuilles DE Données SUR LE ProduitKitchenaid NE Prendra PAS EN Charge Garantie DU Réfrigérateur KitchenaidGarantie Limitée DE UN AN All rights reserved 2318581

2318581 specifications

The KitchenAid 2318581 is an innovative stand mixer attachment designed to enhance the functionality of KitchenAid stand mixers. This attachment is specifically engineered for users who want to broaden their culinary capabilities without investing in additional appliances. The 2318581 attachment brings several main features that cater to both casual cooks and professional chefs alike.

One of the standout characteristics of the KitchenAid 2318581 is its versatility. It is compatible with a wide range of KitchenAid stand mixer models, allowing users to easily connect it to their existing equipment. This means that home chefs can take advantage of the powerful motor and multiple speed settings of their stand mixer, making food preparation more efficient and enjoyable.

The design of the 2318581 attachment is also noteworthy. It is crafted from durable materials that ensure longevity and reliable performance over time. The sleek and modern aesthetic not only fits seamlessly into any kitchen décor but also provides ease of use in terms of attachment and detachment.

In terms of technology, the KitchenAid 2318581 offers a user-friendly interface. Its simple design allows for quick and hassle-free setup, ensuring that users can start creating delicious dishes with minimal delay. This attachment also features multiple operating speeds, providing precision control for various food processing needs, from mixing dough to making sauces and purees.

Another notable technology in this attachment is the integrated safety mechanism. It is designed to operate safely without risk of accidental disconnection while in use, ensuring that users can focus on their cooking without distractions or worries about equipment failure.

The KitchenAid 2318581 is ideal for those who want to streamline their cooking processes, reduce preparation time, and achieve consistent results every time. It transforms the stand mixer into a multifunctional kitchen tool, making it easier to experiment with new recipes and techniques.

In conclusion, the KitchenAid 2318581 is a must-have accessory for any KitchenAid stand mixer owner looking to elevate their culinary experience. With its robust features, advanced technologies, and thoughtful design, it stands out as an essential tool for both novice and experienced cooks alike.
Top Page Image Contents