KitchenAid 2318581 manual Temperature and Moisture, Ice and Water

Page 25

Temperature and Moisture

Temperature is too warm

■New installation? Allow 24 hours following installation for the refrigerator to cool completely.

■Door(s) opened often or left open? Allows warm air to enter refrigerator. Minimize door openings and keep doors fully closed.

■Large load of food added? Allow several hours for refrigerator to return to normal temperature.

■Controls set correctly for the surrounding conditions? Adjust the controls a setting colder. Check temperature in 24 hours. See “Using the Controls.”

There is interior moisture buildup

NOTE: Some moisture buildup is normal.

■Humid room? Contributes to moisture buildup.

■Door(s) opened often or left open? Allows humid air to enter refrigerator. Minimize door openings and keep doors fully closed.

Ice and Water

The ice maker is not producing ice or not enough ice

■Refrigerator connected to a water supply and the supply shutoff valve turned on? Connect refrigerator to water supply and turn water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Ice maker turned on? Make sure wire shutoff arm or switch (depending on model) is in the ON position.

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Large amount of ice recently removed? Allow 24 hours for ice maker to produce more ice.

■Ice cube jammed in the ice maker ejector arm? Remove ice from the ejector arm with a plastic utensil.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

The ice cubes are hollow or small

NOTE: This is an indication of low water pressure.

■Water shutoff valve not fully open? Turn the water shutoff valve fully open.

■Kink in the water source line? A kink in the line can reduce water flow. Straighten the water source line.

■Reverse osmosis water filtration system connected to your cold water supply? This can decrease water pressure. See “Water Supply Requirements.”

■Questions remain regarding water pressure? Call a licensed, qualified plumber.

Off-taste, odor or gray color in the ice

■New plumbing connections? New plumbing connections can cause discolored or off-flavored ice.

■Ice stored too long? Discard ice. Wash ice bin. Allow 24 hours for ice maker to make new ice.

■Odor transfer from food? Use airtight, moisture proof packaging to store food.

■Are there minerals (such as sulfur) in the water? A water filter may need to be installed to remove the minerals.

■Is there a water filter installed on the refrigerator? Gray or dark discoloration in ice indicates that the water filtration system needs additional flushing.

The ice dispenser will not operate properly

■If the ice storage bin is located on the door, remove the temporary shield from underneath the ice storage bin. See “Ice Maker and Storage Bin.”

■Freezer door closed completely? Close the door firmly. If it does not close completely, see “The doors will not close completely.”

■Ice bin installed correctly? Be sure the ice bin is firmly in position.

■New installation? Wait 24 hours after ice maker installation for ice production to begin. Wait 72 hours for full ice production.

■Ice stuck in the delivery chute? Use a plastic utensil to clear the delivery chute.

■Has the wrong ice been added to the bin? Use only cubes produced by the current ice maker.

■Has the ice melted around the auger (metal spiral) in the ice bin? Empty the ice container. Use warm water to melt the ice if necessary.

WARNING

Cut Hazard

Use a sturdy glass when dispensing ice.

Failure to do so can result in cuts.

■Is the ice dispenser stalling while dispensing “crushed” ice? Change the ice button from “crushed” to “cubed.” If cubed ice dispenses correctly, depress the button for “crushed” ice and begin dispensing again.

■Has the dispenser arm been held in too long? Ice will stop dispensing when the arm is held in too long. Wait 3 minutes for dispenser motor to reset before using again.

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Side by Side Refrigerator Table of Contents/Table des matièresTable DES Matières Before You Throw Away Your Old Refrigerator or Freezer Refrigerator SafetyClean Before Using Installation InstructionsUnpack the Refrigerator Location RequirementsWater Supply Requirements Electrical RequirementsBase Grille Refrigerator Doors Reconnect both ground wires Reconnect wiring plug Adjustthe DoorsRemove the Doors Replace the Doors and HingesConnect to Water Line Connectthe Water SupplyConnect to Refrigerator Style 1 Connection to Water Valve Style 2 Connection to Water LinePrepare the Water System Complete the InstallationStyle 3 Connection to Shut-off Valve StyleFactory Trim Kit on some models Install Custom Wood PanelsRemove the Door Panels Replace the Door PanelsDimensions for Custom Wood Panels Dimensions for Routing Handle Sides of Door Panels End ViewNormal Sounds 25 cu. ft Freezer and Refrigerator DoorRefrigerator USE Usingthe ControlsEnsuring Proper Air Circulation Additional Electronic Control Panel Features Adjusting Electronic ControlsWater Filter Indicator Light and Reset Adjusting Digital ControlsOn some models Water and Ice DispensersDispenser Light Style WaterFilter Status LightDispenser Lock on some models Dispenser Control PanelWater Filtration System On some models AccessoryIce Maker and Storage Bin Clean the Ice Storage Bin Refrigerator FeaturesRefrigerator Shelves To Remove and Replace the Ice Storage BinDeliDrawer Convertible Vegetable/Meat Drawer Temperature ControlConvertible Vegetable/MeatDrawer Crisper and Covers Crisper Humidity ControlWine Rack Freezer FeaturesUtility Bin Freezer ShelfDoor Features To Clean Your Refrigerator CleaningRefrigerator Care Changing the Light BulbsPower Interruptions If You Choose to Turn the Refrigerator Off Before You Leave Vacation and Moving CareMoving RefrigeratorOperation TroubleshootingIce and Water Temperature and MoistureTheU.S.A Assistance or ServiceStainless Steel Cleaner & Polish AccessoriesWater Filter Certifications CanadaApplication Guidelines/Water Supply Parameters Product Data Sheets33 100F 0.6 37.8C ONE Year Limited Warranty Kitchenaid Refrigerator WarrantyLifetime Limited Warranty on Door Bins and can Racks Items Kitchenaid will not PAY forPage Avant de jeter votre vieux réfrigérateur ou congélateur Sécurité DU RéfrigérateurEnlever les portes Exigences demplacement Instructions D’INSTALLATIONDéballage du réfrigérateur Enlèvement des matériaux demballageSpécifications de l’alimentation en eau Spécifications électriquesGrille de la base Portesdu réfrigérateur Enlever les portes Replacer les portes et les charnièresRaccordement delacanalisation deau Ajuster lesportesRaccordement à une canalisation d’eau Préparerlesystème d’eau Achever l’installationStyle 2 Connexion à la canalisation deau Style 3 Connexion au robinet darrêtEnsemblesdécoratifsd’origine Remplacement des panneaux de porteSur certains modèles Enlèvement des panneaux de la portePanneaux en relief Panneaux unisExigences de poids pour les encarts de panneaux en relief Commandes à curseur sur certains modèles Utilisation des commandesUtilisation DU Réfrigérateur Sons normauxAjustement des commandes à curseur Ajustement des commandes électroniquesCommandes électroniques sur certains modèles Autres caractéristiques du tableau de commande électroniqueAutres caractéristiques du tableau de commande numérique Commandes numériques sur certains modèlesAjustement des commandes numériques Max Cool refroidissement maximalDistributeurs d’eau et de glaçons La lumière distributeur Style Témoin lumineux de l’étatdu filtre à eauLe verrouillage du distributeur sur certains modèles Remplacement de la cartouche de filtre à eau Sur certains modèles -accessoirePurge du système d’eau après le remplacement du filtre Système de filtration d’eauStyle Mise en marche/arrêt de la machine à glaçons Pour retirer et réinstaller le bac à glaçonsPour enlever et replacer le bac à glaçons Entretien du bac d’entreposage de glaçonsTablettesdu réfrigérateur Caractéristiques DU RéfrigérateurTiroir pour spécialités alimentaires Réglage de l’humidité dansle bac à légumes Sur certainsmodèles -AccessoireCasieràvin Casier utilitairePanier ou bac de congélateur Caractéristiques DU CongélateurTablette de congélateur Bacen plastiquesur certains modèlesCaractéristiques DE LA Porte Entretien DU Réfrigérateur Remplacement des ampoulesd’éclairageNettoyage Nettoyage du réfrigérateurLampe de distributeur sur certains modèles Lampe du tableau de commande du réfrigérateurLampe du bac à légumes Style 2 En arrière du panier du congélateurEntretien avant les vacances ou lors ’un déménagement Pannes de courantDéménagement Fonctionnement du réfrigérateur DépannageGlaçons et eau Température et humiditéDe leau suinte du distributeur Le distributeur deau ne fonctionne pas correctementLeau du distributeur nest pas assez froide Secondes après avoir relâché le levier du distributeurAccessoires Assistance OU Service33 100F 0,6 37,8C Feuilles DE Données SUR LE ProduitGarantie Limitée DE UN AN Garantie DU Réfrigérateur KitchenaidKitchenaid NE Prendra PAS EN Charge All rights reserved 2318581

2318581 specifications

The KitchenAid 2318581 is an innovative stand mixer attachment designed to enhance the functionality of KitchenAid stand mixers. This attachment is specifically engineered for users who want to broaden their culinary capabilities without investing in additional appliances. The 2318581 attachment brings several main features that cater to both casual cooks and professional chefs alike.

One of the standout characteristics of the KitchenAid 2318581 is its versatility. It is compatible with a wide range of KitchenAid stand mixer models, allowing users to easily connect it to their existing equipment. This means that home chefs can take advantage of the powerful motor and multiple speed settings of their stand mixer, making food preparation more efficient and enjoyable.

The design of the 2318581 attachment is also noteworthy. It is crafted from durable materials that ensure longevity and reliable performance over time. The sleek and modern aesthetic not only fits seamlessly into any kitchen décor but also provides ease of use in terms of attachment and detachment.

In terms of technology, the KitchenAid 2318581 offers a user-friendly interface. Its simple design allows for quick and hassle-free setup, ensuring that users can start creating delicious dishes with minimal delay. This attachment also features multiple operating speeds, providing precision control for various food processing needs, from mixing dough to making sauces and purees.

Another notable technology in this attachment is the integrated safety mechanism. It is designed to operate safely without risk of accidental disconnection while in use, ensuring that users can focus on their cooking without distractions or worries about equipment failure.

The KitchenAid 2318581 is ideal for those who want to streamline their cooking processes, reduce preparation time, and achieve consistent results every time. It transforms the stand mixer into a multifunctional kitchen tool, making it easier to experiment with new recipes and techniques.

In conclusion, the KitchenAid 2318581 is a must-have accessory for any KitchenAid stand mixer owner looking to elevate their culinary experience. With its robust features, advanced technologies, and thoughtful design, it stands out as an essential tool for both novice and experienced cooks alike.
Top Page Image Contents