■If the temperature is too warm or too cold in the refrigerator or freezer, first check the air vents to be sure they are not blocked before adjusting the controls.
■The preset settings should be correct for normal household usage. The controls are set correctly when milk or juice is as cold as you like and when ice cream is firm.
Electronic Controls (on some models)
For your convenience, your controls are preset at the factory. When installing your refrigerator, make sure that the controls are still preset to the
Slide Controls (on some models)
For your convenience, your controls are preset at the factory. When installing your refrigerator, make sure that the controls are still preset to the
Style 1
FreezerRefrigerator
cold 1 | 2 |
| 3 | 4 | colder | off | 1 | 2 | 3 | 4 | colder |
Style 2 |
|
|
|
|
|
|
|
|
|
|
|
|
| Freezer |
|
|
| Refrigerator |
| ||||
Off | 1 | 2 | 3 | 4 | Colder | Cold | 1 | 2 | 3 | 4 | Colder |
IMPORTANT:
■For Style 1, your product will not cool when the Refrigerator control is set to OFF. For Style 2, your product will not cool when the Freezer Control is set to OFF.
■Settings to the left of the
■The Automatic Exterior Moisture control continuously guards against moisture buildup on the outside of your refrigerator cabinet. This control does not have to be set or adjusted.
Adjusting Slide Controls
NOTE: Wait at least 24 hours between adjustments. Recheck the temperatures before other adjustments are made.
If you need to adjust temperatures:
■Slide the FREEZER or REFRIGERATOR control, one setting to the right or left depending on the needed temperature change.
NOTE: For Style 1, after adjusting the refrigerator temperature, wait 24 hours and then recheck the FREEZER temperature before making additional adjustments.
CONDITION: | SETTING ADJUSTMENT: |
|
|
REFRIGERATOR too cold | REFRIGERATOR Control |
Not set correctly for conditions | one setting lower |
| |
|
|
REFRIGERATOR too warm | REFRIGERATOR Control |
High use or room very warm | one setting higher |
| |
|
|
FREEZER too cold | FREEZER Control one |
Not set correctly for conditions | setting lower |
| |
|
|
FREEZER too warm/too little ice | FREEZER Control one |
High use or heavy ice usage | setting higher |
| |
|
|
To turn on refrigerator:
■Press and hold ON/OFF for 2 seconds. The indicator lights show the current temperature control settings.
NOTE: Settings to the left of the
Adjusting Electronic Controls
NOTE: Wait at least 24 hours between adjustments. Recheck the temperatures before other adjustments are made.
If you need to adjust temperatures:
■Press the FREEZER or REFRIGERATOR arrow to move the indicator light to the right, one setting at a time. Continue moving the indicator light until it is at the desired setting.
NOTE: With each press of the arrow, you will hear a beep as the light moves to the next setting. The indicator light moves to a setting of “7” and then returns to the setting of “1.”
CONDITION: | SETTING ADJUSTMENT: |
|
|
|
|
REFRIGERATOR too cold | REFRIGERATOR Control |
|
Not set correctly for conditions | one setting lower |
|
|
| |
|
|
|
REFRIGERATOR too warm | REFRIGERATOR Control |
|
High use or room very warm | one setting higher |
|
|
| |
|
|
|
FREEZER too cold | FREEZER Control one |
|
Not set correctly for conditions | setting lower |
|
|
| |
|
|
|
FREEZER too warm/too little ice | FREEZER Control one |
|
High use or heavy ice usage | setting higher |
|
|
| |
|
|
|
|
|
|
Additional Electronic Control Panel Features
Additional features are located on the control panel at the top of the refrigerator compartment.
Water Filter Indicator Light and Reset
See “Water Filter Status Light.”
12