KitchenAid 2209478 manual Top view

Page 11

top grille assembly

decorative panel

assembly

15.Wraparound metal door models: go to step 17.

Panel models: Slide decorative panel assembly up to remove from top grille assembly.

remove 2

screws

top grille decorative panel

16. Panel models: Remove screws and side trim from one side of the decorative panel. Insert your panel. Reattach side trim and screws.

cabinet

cabinet grille panel side trim side trim

grille panel

louver

assembly

screws

 

17. Panel models: Slide decorative panel down to reattach to top grille.

18. If side panels are not used,

Top view

rear wall

support board

A

side panel

B

side trim door

 

Panel

Wraparound

 

models (shown)

metal

 

 

door models

A

24"

23"

 

(61 cm)

(58.4 cm)

B

24-5/8"

23-3/8"

 

(62.5 cm max.)

(59.4 cm)

•Inside side trim piece: Slide front edge of routed side panel into trim piece. Nail rear edge of panel to support board.

NOTE: KitchenAid is not responsible for the removal or addition of molding or decorative panels that would prevent the refrigerator from being serviced.

19. Open refrigerator doors and remove protective film from door frame. Recheck water connections at bottom of refrigerator for leaks.

Install shelves and bins in refrigerator and freezer compartments.

20. Remove the grille and skirt package taped to front of refrigerator. Remove grille and skirt and 2 screws from package.

refrigerator cabinet

bottom

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

floor

 

 

 

 

 

measure this

 

 

 

 

 

 

 

distance

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

measured distance

grille and skirt assembly (from step 21)

score "V" groove

22. Measure this same distance from the top of the bottom grille to the closest "V" groove on the grille skirt.

Use a knife to score down the "V" groove and break skirt at the score line.

screws

grille and

skirt assembly

23. Attach the bottom grille and skirt assembly to the cabinet with the 2 screws.

24. Set refrigerator and freezer compartment controls to the midpoint between “COLD” and “COLDEST.” Check that the compressor is operating properly and that all five lights are working.

To get the most efficient use from your new built-in refrigerator, read your KitchenAid Use and Care Guide. Keep Installation Instructions and Guide close to built-in refrigerator for easy reference.

go to Step 19.

If built-in area depth is 25"

(63.5 cm) or more, side panels can be installed inside the side trim or attached to the outside of the side trim.

21. Open refrigerator door and

Note: If construction will continue after

refrigerator is installed, rotate control in

freezer compartment counterclockwise

measure the distance from the bottom

to the “OFF” position.

of refrigerator cabinet to the floor.

 

Page 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Panel Models and Wraparound Metal Door Models Top view Product dimensionsBefore you Start Front view Side viewModel 36 91 cm 42 106 cm 48 122 cm Width min Built-in opening requirements & dimensionsOpening dimensions For wraparound metal models Door swing dimensionsTipping radius Anti-tip requirementsCustom panels Parts thatPanel kit numbers Panel kits Extended door handle kitsEdge of panel to fit trim piece If side panel will be installed insidePanel models Side panelsAttach support board with screw Wraparound metal door modelsCopies of the standard listed may be obtained from Electrical Water supply requirementsElectrical requirements Water supply requirementsParts supplied for installation Installation StepsWraparound metal door models go to step If doors need to be adjusted upTop view Home Appliances Avertissement Modèles à panneaux et à portes métalliques enveloppantes Dimensions du produitVue avant Vue latérale Vue de dessus203-229 cm Spécifications et dimensions de la cavité d’encastrementDimensions de la cavité Modèles à portes métalliques enveloppantes Dimensions pour le pivotement des portesRayon de basculement Protection contre le basculementPanneaux personnalisés Ensembles de panneauxPanneaux Numéros des ensembles Ensembles de poignées de porte prolongéesVue de l’extrémité de la pièce De garniture latérale Modèles à panneauxPanneaux latéraux Vue de l’extrémité côté poignée du panneau Vue latéraleTringle d’appui Porte Modèles à portes métalliques enveloppantesMm 1/4 po Mm 5/32 po Mm 1/16 po 10 mm 13/32 po Compatible avecSpécifications de l’alimentation en eau Spécifications de l’alimentation électriqueGrille de la base Sachet de pièces Pièces fournies pour l’installationPour des panneaux de plus de 6 mm 1/4 po, usiner les rives Utiliser une clé à douille pourFaire tourner les pieds d’appui sur Vue de dessus Appareils Ménagers Advertencia Antes de Empezar Dimensiones del productoAncho min Dimensiones de aperturaModelo Requisitos anti-vuelco Dimensiones del sentido de la abertura de la puertaÁngulo de inclinación Paneles personalizados Juegos de PanelesNúmeros de juegos de paneles Juego de manijas de puertas extendidasPaneles laterales Modelos con panelesMadera Modelos con puertas laterales metálicasPanel lateral empotrado Fuera de la moldura lateralRequisitos de suministro de agua Requisitos EléctricasRejilla de la base Bolsa de partes Pasos de InstalaciónPartes suministradas para la instalación EstiloHacia arriba o hacia abajo, quite el Si los paneles son de más de 1/4 de pulgSi es necesario ajustar las puertas Hacia adentro o hacia fuera, afloje losModelos con puertas laterales metálicas vaya al paso Vista superiorElectrodomesticos

2209478 specifications

The KitchenAid 2209478 is a remarkable addition to the KitchenAid family, designed to enhance your culinary experience while providing unmatched convenience. This versatile kitchen appliance features a variety of innovative technologies and characteristics that make it a must-have for both amateur cooks and seasoned chefs.

One of the standout features of the KitchenAid 2209478 is its powerful motor. Equipped with a robust 325-watt motor, this appliance ensures efficient mixing, kneading, and whipping, allowing you to effortlessly prepare a wide range of recipes. This power translates to reliability, particularly when handling dense doughs or larger batches, making it a staple for any serious cooking enthusiast.

Another impressive aspect of this model is its planetary mixing action. This unique mechanism allows the mixing attachment to spin in one direction while the bowl rotates in the opposite direction, ensuring thorough mixing and incorporation of ingredients. This ensures that no ingredient is left unmixed, delivering consistent results every time.

The KitchenAid 2209478 is also designed with versatility in mind. It offers multiple speed settings, allowing you to customize the mixing speed according to your specific needs. Whether you're gently folding ingredients or whipping cream at high speed, this appliance has you covered. Its included attachments, such as flat beaters, dough hooks, and wire whips, enhance its functionality, enabling you to tackle various culinary tasks with ease.

Safety and ease of use are further enhanced by the model's tilt-head design. This feature allows for easy access to the mixing bowl and attachments, facilitating a smooth workflow in the kitchen. The locking mechanism ensures stability while mixing, minimizing the risk of accidental spills or movement.

Moreover, the KitchenAid 2209478 boasts a durable construction, made with high-quality materials that ensure longevity. Its sleek design and various color options make it a stylish addition to any kitchen countertop.

In summary, the KitchenAid 2209478 is defined by its powerful motor, innovative mixing technology, versatile speed settings, and durable build. It caters to a wide range of culinary needs, making it an essential tool for anyone looking to elevate their cooking experience. Whether you are kneading bread dough or whipping up a light meringue, this appliance promises to deliver outstanding results every time.
Top Page Image Contents