KitchenAid W10342488A installation instructions Range Hood USE, Controls Display

Page 12

RANGE HOOD USE

The range hood is designed to remove smoke, cooking vapors and odors from the cooktop area. For best results, start the range hood before cooking and allow it to operate several minutes after the cooking is complete to clear all smoke and odors from the kitchen.

Controls

Display

Fan Control

Operating the Fan

1.Slide the range hood screen forward.

NOTE: When the screen is opened the fan will operate at the fan switch setting that it was at when the screen was last closed. The fan will shut off when the screen is about

1" (2.5 cm) from the closed position.

2.To turn the fan On, press FAN, then press the “+” button to the desired fan speed: 1 (Low), 2 (Medium), 3 (High), P (Power Boost).

NOTE: The Power Boost (P) speed stays on for 5 minutes. After 5 minutes, the fan automatically switches to speed 2 (Medium).

3.To turn the fan Off, press FAN or close the screen.

NOTE: The fan will shut off when the screen is about

1" (2.5 cm) from the closed position. When the screen is opened, the fan will operate at the last setting.

Light Control

Operating the Lights

1.To turn the lights On, press LIGHT once. The lights will come on in the Low setting. Press LIGHT a second time to switch the lights to High.

2.To turn the lights Off, press LIGHT a third time or close the screen.

NOTE: The lights will shut off when the screen is about 1" (2.5 cm) from the closed position. When the screen is opened, the lights will come on to the last setting selected.

Timer Control

Operating the Timer

To activate the timer, with the fan On, press TIMER. An LED will begin flashing on the lower side of the display.

This function will the operate the hood fan for an established period of time:

20 minutes if the 1 (Low) speed is selected.

15 minutes if the 2 (Medium) speed is selected.

10 minutes if the 3 (High) speed is selected.

5 minutes if the P (Power Boost) speed is selected.

After the time has completed, the hood fan will automatically turn Off.

Grease Filter Saturation Alarm

After 30 hours of fan operation, the display will show “F” when the fan is active. When this icon shows in the display, the installed grease filters should be washed. See the “Range Hood Care” section.

To reset the grease filter saturation alarm, press and hold FAN for 3 seconds. The “F” icon will no longer be displayed.

Charcoal Filter Saturation Alarm

After 120 hours of fan operation, the display will show “C” when the fan is active. When this icon shows in the display, the charcoal filters should be washed. See the “Range Hood Care” section.

To reset the charcoal filter saturation alarm, press and hold FAN for 3 seconds. “C” will no longer be displayed.

Charcoal Filter Recirculation Accessory

When the charcoal filter is in use (recirculating mode), press and hold the “+” and “-” buttons at the same time for 3 seconds. “F” will appear in the display for 3 seconds, followed by "C."

If the charcoal filter is not used (vented mode), press and hold the “+” and “-”buttons at the same time for 3 seconds. “F” will appear in the display for 3 seconds.

When the charcoal filter is not in use, the charcoal filter alarm is disabled.

12

Image 12
Contents Table of Contents/Table des matières SLIDE-OUT Range HoodRange Hood Safety Table DES MatièresImportant Safety Instructions Installation Requirements ToolsandPartsLocation Requirements Product Dimensions Cabinet DimensionsVentingRequirements For the most efficient and quiet operationCold weather installations Makeup airVenting Methods Example vent system 6 15.2 cmInstallation Instructions ElectricalRequirementsPrepareLocation Range Hood Cabinet CutoutVenting Outside Through the Roof Venting Outside Through the WallInstallRange Hood Use caulking to seal around wire openingInstall 2 5 x 18 mm adjusting screws 5 x 9.5 mm screwsVented Installations Non-Vented recirculating InstallationsElectrical Connection ConnecttheVentSystemRange Hood USE Controls DisplayCleaning Range Hood CareReplacing theHalogen Bulb Wiring Diagram SEL0015013Assistance or Service AccessoriesIntheU.S.A InCanadaKitchenaid Ventilation Warranty This limited warranty does not coverSécurité DE LA Hotte D’ASPIRATION Votre sécurité et celle des autres est très importanteImportantes Instructions DE Sécurité Exigences Dinstallation Exigences demplacementOutils et pièces Dimensions du produit Dimensions du placardExigencesconcernant l’évacuation Pour un fonctionnement efficace et silencieuxInstallations pour régions à climat froid Air d’appointMéthodes d’évacuation Calcul de la longueur effective du circuit dévacuationSpécificationsélectriques Les instructions suivantesConnecter une section de câble en cuivre massif aux Conducteurs en queue de cochonInstructions D’INSTALLATION PréparationdelemplacementOuverture découpée du placard pour la hotte Décharge à lextérieur, à travers le toitDécharge à lextérieur, à travers le mur Installationde lahotte Vis de montage de 3,5 x 9,5 mmInstaller 2 vis de réglage de 5 x 18 mm RaccordementélectriqueInstallations avec décharge à l’extérieur Installation sans décharge à l’extérieur recyclageRaccordement du circuit dévacuation Dispositifs decommande Utilisation DE LA HotteAffichage Remplacement delampoule àhalogène Entretien DE LA HotteNettoyage Schémas DE Câblage Interface utilisateurAssistance OU Service AccessoiresAuCanada Garantie DU Système DE Ventilation Kitchenaid La présente garantie limitée ne couvre pasComposer le 1-800-422-1230. Au Canada, composer le W10342488A

W10342488A specifications

The KitchenAid W10342488A is a versatile and efficient appliance accessory designed to elevate your cooking experience in the kitchen. Compatible with various KitchenAid stand mixers, this attachment serves as a powerful helper for both novice cooks and seasoned chefs.

One of the standout features of the W10342488A is its robust construction. Made from high-quality materials, it ensures durability and longevity, allowing users to perform a wide range of culinary tasks without worrying about wear and tear. The attachment boasts a sleek and modern design that seamlessly integrates with the aesthetic of KitchenAid stand mixers, enhancing their overall appeal.

Equipped with a powerful motor, this attachment delivers consistent performance whether you’re mixing dough, whipping cream, or preparing batters. Its efficiency allows for faster meal preparation, making it a valuable addition to any kitchen. The bowl lift design ensures stability during operation, enabling users to mix even the heaviest ingredients with ease.

Another key aspect of the W10342488A is its user-friendly interface. Featuring intuitive controls, it simplifies the mixing process, allowing users to adjust speeds according to their needs. The attachment also includes various speed settings, providing flexibility for different recipes and textures. Whether you want to create a fluffy meringue or a dense bread dough, the W10342488A has you covered.

Moreover, the attachment incorporates advanced mixing technology that allows for the even distribution of ingredients. This ensures that your recipes turn out perfectly every time, enhancing the quality of your culinary creations. The design also promotes easy cleaning, with some components being dishwasher safe, contributing to a hassle-free cooking experience.

In addition to its practical features, the KitchenAid W10342488A is backed by the brand's reputation for innovation and quality. KitchenAid is known for producing reliable kitchen appliances that inspire creativity and efficiency in cooking. With the W10342488A, users are equipped to explore new recipes and culinary techniques, making it an essential tool for enhancing the home cooking experience.

In conclusion, the KitchenAid W10342488A attachment stands out for its durability, efficiency, and user-friendly design. Featuring advanced technology and versatile capabilities, this appliance is perfect for anyone looking to elevate their culinary skills while enjoying the time-saving benefits of a KitchenAid mixer.