Hotpoint 6 DOG, GW66, GW54, GW62 manual Other Notes on Timer Operation

5 BUTTON TIMER OPERATION

TO CANCEL AN AUTO COOKING PROGRAMME BEFORE

THE COOK PERIOD HAS FINISHED.

Step 1 Turn the oven control(s) to the OFF position.

Step 2 Press the Manual button to return the oven(s) to “Manual” operation.

The ‘Auto’ symbol will go out.

Note 1 When cooking automatically the Cook Period can be checked at any time by simply pressing the Cook Period button.

OTHER NOTES ON TIMER OPERATION

1.When cooking Automatically the Cook Period can be checked at any time simply by pressing the Cook Period button.

2.When cooking Automatically the End Time can be checked at any time by simply pressing the End Time button.

3.Having set a Cook Period and End Time an electronic device stores the information. The device within the timer will switch the oven(s) on and off at the required times.

4.When setting an Auto Cooking Programme and a mistake is made, to clear:–

(a)Press & release the Manual button.

(b)Start the sequence again.

5.If at any time the display shows three flashing zero’s 0.00 and ‘Auto’, it is likely that the electricity supply to the oven has been interrupted. Reset the timer to the correct time of day.

Food in the oven may, therefore, not have been cooked, before serving check food is thoroughly heated and completely cooked.

6.To set each function always press and hold the required function button and at the same time press “+” or “–” buttons.

11