Hotpoint CH60DPXF S, CH60DPCF S, CH60DTCF S Something Wrong With Your Cooker, Problem Check

SOMETHING WRONG

WITH YOUR COOKER

Before contacting your nearest Service Centre/Installer, check the problem guide below; there may be nothing wrong with your cooker.

PROBLEM	CHECK
Burner will not light:	If all burners fail to ignite:
	Check that sparks appear at the burners; a clicking noise should
	be heard.
	If not;
	Check that the electricity supply is turned on.
Hotplate burner:	If the electricity supply has failed, all burners can be lit by a match.
	If only one burner fails to ignite:
	Check that the burner is dry and that spillage of food or cleaning
	fluid remains are not affecting the ignitor or burner ports.
	Clean away any debris with a dry nylon brush such as an old
	toothbrush. If a wire wool pad has been used for cleaning around
	the burner ensure the ignitor is free from any stray strands. Any
	water on the burner should be dried with a cloth or kitchen towel.
Burner ports Ignitor
	On the hotplate make sure that all the burner parts are correctly
	seated.
Slight odour or small amount of smoke when	This is normal and should cease after a short period.
grill / oven used first time.
Nothing works	If you find that the timer display is blank, then it is likely that there is
	no electricity supply to your oven.
	Check:
	(i) That the main cooker wall is switched on
	(ii) Other appliances, to see if you have had a power cut
	(iii) The main circuit breaker for the property
Top oven, grill and main oven do not work	Operating the cooker under the following conditions may cause a
	safety device to operate:
	(a) Grilling with the door closed - Always grill with the door fully
	open
	(b) Grilling for an excessively long period at maximum setting - see
	Grilling guide.
	Switch off appliance and allow to cool for approx 30 mins. Switch
	the cooker back on and check that the Grill, Top oven and Main
	Oven are now operating.
Grill keeps turning on and off.	When the Grill control is operated, the Grill will cycle on and off,
	this is normal and not a fault.
The oven is not working and showing F01 to F68	Your appliance has developed a fault which will require
code in the display	assistance from our service department.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24

38