Hotpoint RB632, RB533 To Set the Clock, To Set the Timer, To Reset the Timer, To Cancel the Timer

Page 13

To Set the Clock:

	Press the CLOCK pad.
1
	Press the SET TIME +/- pads.
2
	Press the CLOCK pad to start.
3

Make sure the clock is set to the correct time of day.

Safety Information Operating Instructions

The timer is a minute timer only.

The timer does not control oven operations. The maximum setting on the timer is 11 hours and 59 minutes.

To Set the Timer:

1 Press the TIMER ON/OFF pad.

2 Press the SET TIME +/- pads until the amount of time you want shows in the display. The timer will start automatically within a few seconds of releasing the pad.

At the end of the timer operation, the timer beeps 3 times followed by reminder beeps until the timer is cancelled.

To Reset the Timer:

If the display is still showing the time remaining, you may change it by pressing the SET TIME +/- pads until the time you want appears in the display.

If the remaining time is not in the display, recall the remaining time by pressing the TIMER ON/OFF pad and then pressing the SET TIME +/- pads until the new time you want shows in the display.

To Cancel the Timer:

Press the TIMER ON/OFF pad once. To cancel the timer press the TIMER ON/OFF pad again.

Installation Instructions Troubleshooting Tips Customer Service

13

Image 13

Contents Ranges Congratulations You Are Now Part of the Hotpoint Family Staple sales slip or cancelled check hereWrite the model and serial numbers here Hotpoint & You Service Partnership All ranges can tip and injury could result Important Safety NoticeSafety Precautions Safety Information When Cooking PORK… Oven Surface Cooking Units REMEMBER… Customer Service Troubleshooting TipsHow to Set Using the surface unitsSurface Cookware Tips Wok CookingClock and Timer Features Using the clock and timerTo Reset the Timer To Set the TimerTo Cancel the Timer To Set the ClockOven Temperature Knob Using the ovenCustomer Service Troubleshooting Before you begin…How to Set the Oven for Broiling Preheating and Pan PlacementAluminum Foil Comments Broiling guideTo Adjust the Thermostat Adjust the oven thermostat-Do it yourselfControl Panel and Knobs Care and cleaning of the rangeOven Vent Painted SurfacesTo clean the outside of the door To clean the inside of the doorLift-Off Oven Door Oven Heating Elements Oven Light Replacement on some modelsOven Shelves To remove the coverBroiler Pan & Grid How to Remove the Storage Drawer to Clean Under the RangeTo remove the storage drawer To replace the storage drawerLift-Up Cooktop on some models Porcelain Enamel CooktopDrip Pans Surface UnitsTo remove a surface unit To replace a surface unitContinuous-cleaning oven cleans itself while cooking Let the range parts cool before handling To Clean the Continuous-Cleaning OvenPorcelain Oven Interior on some models Before You Begin Installation of the rangePrepare the Opening Prepare for Electrical Connection Flooring Under the RangeStrain relief, they can be removed for better fit Power Cord Strain Relief InstallationWire Power Cord Installation Before After Wire Conduit Installation Conduit Leveling the Range Anti-Tip Bracket InstallationFinal Check Before you call for service… Or roast properly Food does not bakeFood does not Broil properly At BroilClock and timer Oven temperaturePower outage Too hot or too coldWe Will Replace, At No Charge To You Hotpoint Range WarrantyOne Year In-Home Repair Service 800-GE-CARES Service Telephone NumbersTDD 800-TDD-GEAC

Related manuals

Manual 40 pages 55.5 Kb