Hotpoint RB536, RB533, RB526, RB632, RB525 owner manual Installation of the range, Before You Begin

Page 27

Installation of the range.

Read these instructions completely and carefully.

Before You Begin

IMPORTANT: Save these instructions for the local electrical inspector’s use.

IMPORTANT: OBSERVE ALL GOVERNING CODES AND

ORDINANCES.

NOTE TO INSTALLER: Leave these instructions with the appliance after installation is completed.

NOTE TO CONSUMER: Keep this Owner’s Manual and

Installation Instructions for future use.

NOTE: This appliance must be properly grounded.

Tools You Will Need

■Large blade screwdriver

■1/4″ hex head nutdriver

■Channel lock pliers or small ratchet wrench with 3/16″ socket (for leveling range)

Electrical Requirements

CAUTION, FOR PERSONAL SAFETY: DO NOT USE AN

EXTENSION CORD WITH THIS APPLIANCE.

REMOVE HOUSE FUSE OR OPEN CIRCUIT BREAKER

BEFORE BEGINNING INSTALLATION.

This appliance must be supplied with the proper voltage and frequency, and connected to an individual, properly grounded branch circuit, protected by a circuit breaker or time delay fuse, as noted on the rating plate.

Wiring must conform to National Electric Codes.

If the electric service provided does not meet the above specifications, have a licensed electrician install an approved outlet.

Because range terminals are not accessible after range is in position, flexible service conduit or cord must be used.

Safety Information Operating Instructions Installation Instructions Troubleshooting Tips Customer Service

27

Image 27

Contents Ranges Staple sales slip or cancelled check here Congratulations You Are Now Part of the Hotpoint FamilyWrite the model and serial numbers here Hotpoint & You Service Partnership All ranges can tip and injury could result Important Safety NoticeSafety Precautions Safety Information When Cooking PORK… Oven Surface Cooking Units REMEMBER… Customer Service Troubleshooting TipsWok Cooking Using the surface unitsHow to Set Surface Cookware TipsClock and Timer Features Using the clock and timerTo Set the Clock To Set the TimerTo Reset the Timer To Cancel the TimerBefore you begin… Using the ovenOven Temperature Knob Customer Service TroubleshootingPreheating and Pan Placement How to Set the Oven for BroilingAluminum Foil Comments Broiling guideTo Adjust the Thermostat Adjust the oven thermostat-Do it yourselfPainted Surfaces Care and cleaning of the rangeControl Panel and Knobs Oven VentTo clean the inside of the door To clean the outside of the doorLift-Off Oven Door To remove the cover Oven Light Replacement on some modelsOven Heating Elements Oven ShelvesTo replace the storage drawer How to Remove the Storage Drawer to Clean Under the RangeBroiler Pan & Grid To remove the storage drawerLift-Up Cooktop on some models Porcelain Enamel CooktopTo replace a surface unit Surface UnitsDrip Pans To remove a surface unitContinuous-cleaning oven cleans itself while cooking Let the range parts cool before handling To Clean the Continuous-Cleaning OvenPorcelain Oven Interior on some models Before You Begin Installation of the rangePrepare the Opening Prepare for Electrical Connection Flooring Under the RangeStrain relief, they can be removed for better fit Power Cord Strain Relief InstallationWire Power Cord Installation Before After Wire Conduit Installation Conduit Anti-Tip Bracket Installation Leveling the RangeFinal Check Before you call for service… Broil properly At Broil Food does not bakeOr roast properly Food does notToo hot or too cold Oven temperatureClock and timer Power outageHotpoint Range Warranty We Will Replace, At No Charge To YouOne Year Service Telephone Numbers In-Home Repair Service 800-GE-CARESTDD 800-TDD-GEAC

Related manuals

Manual 40 pages 55.5 Kb