OPERATING YOUR COFFEE MAKER
PREPARING COFFEE MAKER FOR BREWING COFFEE:
1.Place the coffee maker on a flat, level surface away from any edge.
2.Plug the unit into a 120V / 60Hz only outlet.
3.The lid of the carafe must be fitted properly during the brewing process. And the carafe must be set on the warming plate.
FILLING THE WATER RESERVOIR: Figure 2
4. | Open the hinged water reservoir cover located at |
|
| the top of the coffee maker. |
|
5. | Fill the carafe with cold water corresponding to the |
|
| desired cups of coffee you will be brewing. Cup |
|
| markings are indicated on the handle of the carafe. |
|
6. | Empty the water from the carafe into the water | FIGURE 2 |
| reservoir, located behind the filter basket holder. NOTE: |
The automatic brewing system has been designed to work with cold water only.
NOTE: The amount of brewed coffee after the brewing process is complete will always be slightly less than the amount of water placed in the coffee maker’s water reservoir, since some water is absorbed by the coffee grounds and filter. Add a little extra water at the beginning so that you have the exact number of cups desired.
PREPARING THE COFFEE:
7.The included permanent filter may be used instead of a paper filter. If using paper filters, insert a #4
8.Return the filter basket with the
9.Close the hinged water reservoir cover. Place the carafe with the lid in place
on the warming plate.