Frymaster FBCR18, FBKR18 Series manual Definitions, Shipping Damage Claim Procedure

Page 8

1.6 Definitions

QUALIFIED AND/OR AUTHORIZED OPERATING PERSONNEL

Qualified/authorized operating personnel are those who have carefully read the information in this manual and have familiarized themselves with the equipment functions, or who have had previous experience with the operation of the equipment covered in this manual.

QUALIFIED INSTALLATION PERSONNEL

Qualified installation personnel are individuals, or firms, corporations, or companies which, either in person or through a representative, are engaged in and are responsible for the installation of electri- cal and gas appliances. Qualified personnel must be experienced in such work, be familiar with all electrical precautions involved, and have complied with all requirements of applicable national and local codes.

QUALIFIED SERVICE PERSONNEL

Qualified service personnel are those that are familiar with Frymaster equipment and who have been authorized by Frymaster to perform service on Frymaster equipment. All authorized service person- nel are required to be equipped with a complete set of service and parts manuals, and to stock a pre- scribed minimum amount of Frymaster equipment parts.

A list of Frymaster Factory Authorized Service Centers (FASC) was included with the unit when it was shipped from the factory. Failure to use qualified service personnel will void the Frymaster

Warranty on your equipment.

1.7Shipping Damage Claim Procedure

Your Frymaster equipment was carefully inspected and packed before leaving the factory. The transportation company assumes full responsibility for safe delivery upon acceptance of the equip- ment for transport.

What to do if your equipment arrives damaged:

1.File a claim for damages immediately, regardless of the extent of damages.

2.Inspect for and record all visible loss or damage and ensure that this information is noted on the freight bill or express receipt and is signed by the person making the delivery.

3.Concealed loss or damage that was unnoticed until the equipment was unpacked should be re- corded and reported to the freight company or carrier immediately upon discovery. A concealed damage claim must be submitted within 15 days of the date of delivery. Ensure that the shipping container is retained for inspection.

FRYMASTER DOES NOT ASSUME RESPONSIBILITY

FOR DAMAGE OR LOSS INCURRED IN TRANSIT.

1-3

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Hour Service Hotline Canada Page FBCR18 & FBKR18 Series GAS Rethermalizers Table of Contents Operator Troubleshooting Parts Ordering and Service Information Applicability and ValidityEquipment Description Safety InformationInstallation, Operating, and Service Personnel What to do if your equipment arrives damaged Shipping Damage Claim ProcedureDefinitions General Installation Requirements National Code Requirements Caster/Leg Installation Incoming Gas Pressures GAS Connections and Pipe Sizes Converting to Another Gas Type FBCR18 Series Computer FBCR18 Series ComputerProgramming the FBCR18 Series Computer FBKR18 Series Computer Programming the FBKR18 Series Computer Page Operating the FBKR18 Series Rethermalizer FBKR18 Computer Display Messages Honeywell Shutting the Rethermalizer Down Daily Checks and Services Inspect Rethermalizer and Accessories for DamageQuarterly Checks and Services Semi-Annual Checks and ServicesCheck Burner Manifold Pressure Burner Manifold Gas Pressures Page Troubleshooting Guides Water not HEATING. Autofill Worked Properly Burners do Not Light Problem is beyond scope of operator troubleshooting Replacing the Computer or Computer Wiring Harness Functional Description Computers Temperature Probe Measuring Flame Current Cleaning the Gas Valve Vent TubeChecking the Burner Manifold Gas Pressure Replacing the Temperature Probe Replacing the Interface BoardReplacing an Ignitor Assembly Replacing an Ignition ModuleReplacing the Combustion Air Blower Replacing the Gas ValveReplacing a Burner Assembly Troubleshooting and Problem Isolation Replacing the CookpotIgnition Failures Incoming Gas Pressures Improper Burner FunctioningPage Improper Temperature Control Computer-Related ProblemsTroubleshooting the Gas Valve Troubleshooting the 24 VAC Circuit 24VAC Circuit Troubleshooting the Temperature Probe Probe Resistance Chart Simplified Wiring Diagrams FBKR18 onlyInterface Board Computer FBCR18 & FBKR18 Series GAS Rethermalizers Parts List Burner System ComponentsCabinetry and Associated Components Side, Cabinet, CRS for S/S units, useComputer, Component Box Assembly, and Associated Parts Cookpot and Associated Parts Gas Supply Components Plumbing Components Nipple, Close, 1 NPTService Hotline

FBKR18 Series, FBCR18 specifications

The Frymaster FBKR18 and FBCR18 series are among the industry’s leading commercial fryers, designed to meet the rigorous demands of high-volume food service operations. These advanced fryers are built to provide exceptional frying performance, energy efficiency, and ease of use, making them ideal for restaurants, cafeterias, and catering operations.

One of the standout features of the Frymaster FBKR18 and FBCR18 series is their innovative cooking technology. These fryers incorporate the patented Frymaster oil management system, which helps to improve oil life while ensuring consistent food quality. The system includes an advanced filtration mechanism that can be operated manually or automatically, allowing for quick and efficient oil changes while minimizing downtime.

Another key characteristic of the FBKR18 and FBCR18 series is their impressive capacity. With the ability to hold up to 18 pounds of oil, these fryers can accommodate large batches of food, making them perfect for busy kitchens. The fryers come equipped with dual fry pots, allowing operators to prepare multiple menu items simultaneously without flavor transfer.

Energy efficiency is also a critical aspect of the Frymaster FBKR18 and FBCR18 series. These fryers utilize a high-efficiency burner design that reduces energy consumption while still delivering sufficient cooking power. This feature not only helps to lower utility costs but also contributes to a more environmentally friendly operation.

The design of the FBKR18 and FBCR18 series is focused on ease of use and safety. The fryers feature a user-friendly digital control panel that allows operators to easily monitor and adjust cooking temperatures. Additionally, the fryers are equipped with built-in safety features, such as automatic shut-off mechanisms, ensuring safe operation even in high-demand situations.

Durability is another hallmark of these fryers. Constructed from high-quality stainless steel, the FBKR18 and FBCR18 series are built to withstand the rigors of daily use in commercial kitchens. Their robust design not only ensures longevity but also simplifies cleaning and maintenance.

In summary, the Frymaster FBKR18 and FBCR18 series fryers combine advanced cooking technology, impressive capacity, energy efficiency, and user-friendly design to meet the needs of busy food service operations. With their durability and high performance, these fryers stand out as excellent choices for chefs aiming to achieve culinary excellence.
Top Page Image Contents