
1.5 Check Burner Manifold Pressure
WARNING
This task should be performed by qualified service personnel only.
1.Ensure that the gas valve knob is in the "OFF" position
2.Remove the pressure tap plug from the gas valve (see illustration below).
Pressure tap locations on CE gas valves (left) and
3.Insert the fitting for a gas
4.Place the gas valve in the "Pilot" position
5.To adjust burner gas pressure, remove the cap from the gas valve regulator and adjust to correct pressure.
6.Place the fryer power switch and the gas valve in the "OFF" position. Remove the pressure- measuring device fitting from the pressure tap hole and reinstall the pressure tap plug.
7.Repeat step 4 to continue fryer operation.