Frymaster Super Runner Series manual Oil Drain Manifold, Drain Flush and Drain Valve Components

Page 40

DEAN MILLIVOLT GAS FRYERS

CHAPTER 2: PARTS LIST

2.5.1 Oil Drain Manifold, Drain Flush and Drain Valve Components (cont.)

ITEM

PART #

1

823-3565

*823-3566

2812-1524

3813-0784

4813-0829

5813-0748

6200-1827

7813-0659

8809-0884

*816-0544

9813-0686

10 813-0165

11 813-0672

12 810-1669

13 810-1069

14 810-1668

15106-1401

16200-1617

17210-2029

18210-4727

*823-3440

*809-0885

*809-0843

*816-0547

19 807-2104

20 809-0842

21 816-0220

22 200-1257

23 810-2127

24 810-2052

*810-2442

*810-1338

*210-3902

*106-1417SP

*813-0138

*813-0716

*813-0406

25 810-2126

*812-1226SP

*813-0392

*812-1681

*813-0870

*813-0669

*Not Illustrated

COMPONENT

Elbow, with Bracket (LH)- 1-¼"- UFF 50

Elbow, with Bracket (RH)- 1-¼"- UFF 50

Drain Pipe, Left Side (Use 823-3418 for Chili’s)

Drain Pipe, Right Side 1 ½” x 6”

Elbow, 1-½" NPT 75°

Tee, 1-½” NPT x 1-¼" BM With Handle Bracket

Drain Manifold Tube- 1-½” x 13-¼"

Pipe Cap, 1-½"

Nut, Slip Joint- 1-½"

O-ring (Slip-Joint Nut)

Bell Reducer, ½" NPT x 1-½"

Elbow, Street- ½" NPT 90°

Nipple, ½” NPT x 8" BM

Adapter, ⅝" O.D. x ½"- Female

Flex Line, ⅝" x 29-½ "

Adapter, ⅝" O.D. x ½"- Male

Drain Valve Components

Bracket, Microswitch (Optional On SUFF/UFF Units) Washer, Drain Valve (Use Without Microswitch)

Bracket, Activator- Microswitch (Also Used On Valves Without Microswitch As A Handle-Stop)

Handle (Actuator), Drain Valve Handle, Push/Pull- Drain (With Cap) Washer, ⅜” x 1” x .083"

Pin, Cotter Cap, Vinyl-Red

Microswitch (Optional On SUFF/UFF Units)

Nut, Nylock- #4-40 (Microswitch To Bracket) Insulation, Microswitch

Retainer, Nut

Drain Valve, 1-½" Full Port (With Washers & Nut) Drain Valve, 1-¼" (1" Standard Port)

Handle, Valve Lever

Drain Valve, 1" SM20G, SR42G see note below Handle, Valve Lever (For 810-1338 Only)- SM20G Drain Valve Assembly 1” RH and LH

Nipple, 1" NPT x Close (To Adapt To 1-¼" Extended Drain Nipple) Bushing, 1" NPT x 1-¼" BM (To Adapt To 1-¼" Extended Drain Nipple) Coupling, 1-¼" NPT x 2" (To Adapt To 1-¼" Extended Drain Nipple) Drain Valve, 1-¼" Full-Port (Use 106-2439 for Assembly)

Nipple, Drain- 1-¼" Painted- SM Series Fryers (use 813-0276 for SM20) Nipple, Drain- 1-¼” NPT x 8" BM- All SR Series Fryers except SR42 w/ 1” Nipple, Drain- 1-¼” x 5” NPT

Nipple, Drain- 1-¼” x 10” NPT

Nipple, Drain- 1” x 8” (Use 812-1668 for 5”-SR42) (Use 813-0605 for 9”- SR62)

Note: In Mar. 2003 SR42G went to 1” drain valves.

2-17

Image 40
Contents Super Runner and Super Marathon Series Hour Service HotlineMAY Page Iii Table of Contents Parts List NON-CE Altitudes of 2000 feet or less Functional DescriptionCE only Altitudes of 2000 feet or less Pilot Ignition System ThermostatsAccessing Fryers for Servicing Cleaning the Gas Valve Vent TubeCalibrating the Operating Thermostat Check Burner Manifold Pressure Replacing Fryer Components Adjusting the Pilot FlameReplacing the Operating Thermostat Replacing the Operating Thermostat Replacing the High-Limit Thermostat Replacing the FrypotTroubleshooting and Problem Isolation Pilot FailuresSystem Resistance Check Complete System CheckAutomatic Pilot Dropout Check Pilot Fails to Light Improper Burner Functioning Filtration Problems Leaking Wiring Diagrams Current Production Units with Honeywell Gas Valve Non-CECurrent Production Units with Honeywell Gas Valve CE Current Production Units with Robertshaw Gas Valve After May UFF Filtration Wiring Diagram OptionalCabinetry Components, Single Fryers Channel, Base- Front & Rear Non-Filtration Single FryersSide Panel, Left Suff Base Components- SM Series With Suff FiltrationSide Panel, Right Door Assembly Components Panel, Outer Door- SM20G Assembly 106-2482SPBase Channel, Front & Rear- SM220G, SM50G See .1 For Cabinetry Components, Multi-Battery Frying SystemsAdditional Single Fryer Base Channel Components Accessories Fluecap, SM20/20/50GDean Millivolt GAS Fryers Parts List Thermostat, Sunne Use 807-1692 for CE Frypot and Burner System Components 1 SM220 and SM20/20/~ SystemsFlue Assembly- SM20G SR Series, SM35G, SM40G and SM50G Systems Burner, Right- SR38G, SR42G, SM35G, SM40G Burner, Center- SR38G, SR42G, SM35G, SM40GBurner, Left- SR38G, SR42G, SM35G, SM40G Shield, Burner Heat- SR52G, SM5025 106-1742SPFlue Assembly- SR52G, SM50G Flue Assembly- SR38G106-0696SPFlue Assembly- SR42G 106-0954SPFlue Assembly- SM35G, SM40G3 SR62, SM60G and SM80G Systems SM80G ShownFrypot- M/S- SM80G Prior To 10/99 obsolete use Valve, Trailing Pilot- SM60G, SM80G, SR62G adjustment valveFrypot- S/S- SM60G, SR62G Use 823-3511SP for SM160G Flue Assembly- SM80G Flue Assembly- SM60G, SR62GOil Drain Manifold Componets Oil Drain Manifold, Drain Flush and Drain Valve Components Drain Valve ComponentsPlace Over 2 3 Oil Drain Manifold, Drain Flush & Drain Valve Components Flush Oil Drain LineOil Return Manifold Components Oil Return Manifold Components Fryers with 1½ Drains810-0051 200-1143 809-0877 106-2568SP Not Illustrated Oil Return Manifold Components Fryers with 3 Drains Oil Return and Oil Flush Components Oil Return and Oil Flush Components Fryers with 1½ DrainsMicroswitch Bracket Assembly, Oil Return Oil Suction Start FittingOil Return and Oil Flush Components Fryers with 3 Drains Oil Suction Assembly Suction Manifold AssemblyUnder Fryer Filter UFF Components 1 SM50 and SM60 Series Fryers Except Ihop2 SM50 Series Fryers, Ihop UFF 50 with Filter Leaf 3 SM80 Series Fryers Single Under Fryer Filter Suff Components 1 SM50 Series Fryers2 SM60 and SM80 Series Fryers This page Intentionally Left Blank Service Hotline